Effects of cobalt on mechanical properties of high silicon ductile irons

References

• Jalava K, Soivio K, Laine J, et al. Elevated temperature thermal conductivities of some as-cast and austempered cast irons. Mater Sci Technol. 2018;34:327–333. doi: 10.1080/02670836.2017.1389117
   Web of Science ®Google Scholar
• Borsato T, Berto F, Ferro P, et al. Influence of solidification defects on the fatigue behavior of heavy-section silicon solution-stregthened ferritic ductile cast iron. Fatigue Fract Eng Mater Struct. 2018;41:2231–2238. doi: 10.1111/ffe.12810
   Web of Science ®Google Scholar
• Yürektürk Y, Baydoğan M. Characterization of ferritic ductile iron subjected to successive aluminizing and austempering. Surf Coat Technol. 2018;347:142–149. doi: 10.1016/j.surfcoat.2018.04.083
   Web of Science ®Google Scholar
• Ikeda T, Noda N-A, Sano Y. Conditions for notch strength to be higher than static tensile strength in high-strength ductile iron. Eng Fract Mech. 2019;206:75–88. doi: 10.1016/j.engfracmech.2018.11.034
   Web of Science ®Google Scholar
• Björkegren L-E, Hamberg K, Johannesson B. Mechanical properties and machinability of Si-solution-hardened ferritic ductile iron. AFS Trans. 1996;104:139–145.
   Google Scholar
• Björkegren L-E, Hamberg K. Silicon alloyed ductile iron with excellent ductility and machinability. Hilton Head Island (SC): Keith Millis Symposium on Ductile Cast Iron; 2003.
   Google Scholar
• Löblich H, Stets W. Werkstoff- und fertigungstechische Grundlagen der Herstellung und Anwendung von hoch siliciumhaltigem Gusseisen mit Kugelgraphit. Teil: 2. Impftechnologie, Abweichungen in der Graphiform, Bearbeitbarkeit. Giesserei. 2013;100:42–53.
   Google Scholar
• Stets W, Löblich H, Gassner G, et al. Solution strengthened ferritic ductile cast iron properties, production and application. Int J Metalcast. 2014;8:35–40. doi: 10.1007/BF03355580
   Web of Science ®Google Scholar
• Méndez S, Arenas MA, Niklas A, et al. Effect of silicon and graphite degeneration on high-temperature oxidation of ductile cast iron in open air. Oxid Met. 2019;91:225–242. doi: 10.1007/s11085-018-9875-0
   Web of Science ®Google Scholar
• Arenas MA, Niklas A, Conde A, et al. Corrosion behaviour of ductile cast irons partially modified with silicon in 0.03 M NaCl. Rev Met. 2014;50:e032. doi: 10.3989/revmetalm.032
   Web of Science ®Google Scholar
• Reynaud A. Corrosion of cast irons (cap. 2). In: Richardson TJA, editor. Shreir’s corrosion. Vol. 3. Amsterdam: Elsevier; 2010. p. 1737–1788.
   Google Scholar
• Jafar K-A, Behnam A-A. Influence of mold preheating and silicon content on microstructure and casting properties of ductile iron in permanent mold. J Iron Steel Res Int. 2011;18:34–39.
   Web of Science ®Google Scholar
• Riebisch M, Seiler C, Pustal B, et al. Microstructure of as-cast high-silicon ductile iron produced via permanent mold casting. Int J Metalcast. 2019;13:112–120. doi: 10.1007/s40962-018-0232-5
   Web of Science ®Google Scholar
• González-Martínez R, de la Torre U, Ebel A, et al. Effects of high silicon contents on graphite morphology and room temperature mechanical properties of as-cast ferritic ductile cast irons. Part II – mechanical properties. Mater Sci Eng A. 2018;712:803–811. doi: 10.1016/j.msea.2017.11.051
   Web of Science ®Google Scholar
• González-Martínez R, de la Torre U, Lacaze J, et al. Effects of high silicon contents on graphite morphology and room temperature mechanical properties of as-cast ferritic ductile cast irons. Part I – microstructure. Mater Sci Eng A. 2018;712:794–802. doi: 10.1016/j.msea.2017.11.050
   Web of Science ®Google Scholar
• Franzen D, Weiß P, Pustal B, et al. Influence of aluminium on silicon microsegregation in solution strengthened ductile iron. Mater Sci Technol. 2019;35:687–694. doi: 10.1080/02670836.2019.1582193
   Web of Science ®Google Scholar
• Thury W, Hummer R, Nechtelberger E. Der Einfluss von Kobalt, Nickel un Kupfer auf das Gefüge und die mechanischen Eingenschaften von Gusseisen mit Kugelgraphit. Giesserei-Praxis. 1967;15:273–279. German.
   Google Scholar
• Mold EK. Kobaltlegiertes Gusseisen mit Kugelgraphit. Giesserei. 1968;55:244–251.
   Google Scholar
• Hsu C-H, Chen M-L, Hu C-J. Microstructure and mechanical properties of 4% cobalt and nickel alloyed ductile irons. Mater Sci Eng A. 2007;444:339–346. doi: 10.1016/j.msea.2006.09.027
   Web of Science ®Google Scholar
• Weiß P, Brachmann J, Bührig-Polaczek A, et al. Influence of nickel and cobalt on microstructure of silicon solution strengthened ductile iron. Mater Sci Technol. 2015;31:1479–1485. doi: 10.1179/1743284714Y.0000000735
   Web of Science ®Google Scholar
• Duwe S, Tonn B. Ductile cast irons with high toughness at low temperatures. Mater Sci Forum. 2018;925:334–341. doi: 10.4028/www.scientific.net/MSF.925.334
   Google Scholar
• Fischer SF, Brachmann J, Bührig-Polaczek A, et al. Metallurgische Verbesserung von mischkritallverfestigten Gusseisen mit Kugelgrafit Teil 2: Einfluss von cobalt und nickel auf die mechanischen Eigenschaften. Giesserei. 2017;104:40–51. German.
   Google Scholar
• Castro M, Herrera M, Cisneros MM, et al. Simulation of thermal analysis applied to the description of the solidification of hypereutectic SG irons. Int J Cast Met Res. 1999;11:369–374. doi: 10.1080/13640461.1999.11819301
   Web of Science ®Google Scholar
• Stefanescu DM, Lacaze J. Thermodynamics principles as applied to cast iron. In: ASM handbook. Vol 1A. Cast iron science and technology; 2017. p. 31–45.
   Google Scholar
• Feret LR. Assoc. Internat. Pour Íessai des Mat. Zurich: 2 Group D; 1931.
   Google Scholar
• Zhou J, Schmitz W, Engler S. Untersuchung der gefügebildung von gusseisen mit kugelgraphit bei langsamer erstarrung. Giessereiforschung. 1987;39:55–70.
   Google Scholar
• Prinz B, Eschborn KJ, Schulze T, et al. Untersuchung von ursachen von graphitentartungen bei gusseisen mit kugelgraphit in form von chunky-graphit. Giessereiforschung. 1991;43:107–115.
   Google Scholar
• Sertucha J, Lacaze J, González-Martínez R. Chunky graphite in spheroidal graphite iron: review of recent results and definition of a predicting index. ICASP5-CSSCR5, Salzburg, IOP Conf Ser Mater Sci Eng. 2019;529:paper012017.
   Google Scholar
• Bauer B, Pokopec IM, Petrič M, et al. Effect of Si and Ni addition on graphite morphology in heavy-section spheroidal graphite iron parts. Mater Sci Forum. 2018;925:70–77. doi: 10.4028/www.scientific.net/MSF.925.70
   Google Scholar
• Gagné M, Labrecque C, Javaid A. Effect of wall thickness on the graphite morphology and properties of D5-S austenitic ductile iron. AFS Trans. 2007;115:paper 07-005.
   Google Scholar
• Lacaze J, Larrañaga P, Asenjo I, et al. Influence of 1 wt% addition of Ni on structural and mechanical properties of ferritic ductile irons. Mater Sci Technol. 2012;28:603–608. doi: 10.1179/1743284711Y.0000000100
   Web of Science ®Google Scholar
• de la Torre U, Loizaga A, Lacaze J, et al. As cast high silicon ductile irons with optimised mechanical properties and remarkable fatigue properties. Mater Sci Technol. 2014;30:1425–1431. doi: 10.1179/1743284713Y.0000000483
   Web of Science ®Google Scholar
• Weiß P, Tekavčič A, Bührig-Polaczek A. Mechanistic approach to new design concepts for high silicon ductile iron. Mater Sci Eng A. 2018;713:67–74. doi: 10.1016/j.msea.2017.12.012
   Web of Science ®Google Scholar
• Fukaya M, Miyazaki T, Kozakai T. Phase diagrams calculated for Fe-rich Fe-Si-Co and Fe-Si-Al ordering alloy systems. J Mater Sci. 1991;26:5420–5426. doi: 10.1007/BF02403939
   Web of Science ®Google Scholar
• Raghavan V. Co-Fe-Si (cobalt-iron-silicon). J Phase Equilib. 1994;15:527–528. doi: 10.1007/BF02649407
   Google Scholar
• Janssen S, Sheng S. Gusseisen mit kobalt und bauteil und seine verwendung in dampfturbinen, EP-1808504A1; 2006.
   Google Scholar