Investigation on formability of three-layer joined Al/Cu/Al sheets annealed at different temperature

References

• Hoseini-Athar MM, Tolaminejad B. Interface morphology and mechanical properties of Al-Cu-Al laminated composites fabricated by explosive welding and subsequent rolling process. Met Mater Int. 2016;22:670–671. doi: 10.1007/s12540-016-5687-4
   Web of Science ®Google Scholar
• Honarpisheh M, Asemabadi M, Sedighi M. Investigation of annealing treatment on the interfacial properties of explosive-welded Al / Cu / Al multilayer. J Mater Des. 2012;37:122–127. doi: 10.1016/j.matdes.2011.12.045
   Web of Science ®Google Scholar
• Rahmatabadi D, Tayyebi M, Hashemi R. Investigation of mechanical properties, fractographyand microstructure of layered Al / Cu composite produced by cold roll bonding. J Sci Technol Compos. 2017;4:311–318.
   Google Scholar
• Karajibani E, Hashemi R, Sedighi M. Experimental determination of forming limit diagram in aluminum-copper two-layer metallic sheets. J Sci Technol Compos. 2016;2:45–50.
   Google Scholar
• Backhofen SPK. Plastic instability and fracture in sheet stretched over rigid punches. ASM Trans Q. 1963;56:25–48.
   Google Scholar
• Liu H, Yang Y, Yu Z, et al. The application of a ductile fracture criterion to the prediction of the forming limit of sheet metals. J Mater Process Technol. 2009;209:5443–5447. doi: 10.1016/j.jmatprotec.2009.04.020
   Web of Science ®Google Scholar
• Han HN, Kim KH. A ductile fracture criterion in sheet metal forming process. J Mater Process Technol. 2003;142:231–238. doi: 10.1016/S0924-0136(03)00587-9
   Web of Science ®Google Scholar
• Ozturk F, Lee D. Analysis of forming limits using ductile fracture criteria. J Mater Process Technol. 2004;147:397–404. doi: 10.1016/j.jmatprotec.2004.01.014
   Web of Science ®Google Scholar
• Safari M, Hosseinipour SJ, Azodi HD. Experimental and numerical analysis of forming limit diagram (FLD) and forming limit stress diagram (FLSD). Mater Sci Appl. 2011;2:496–502. doi: 10.4236/msa.2011.25067
   Google Scholar
• Lou Y, Huh H, Ha J. Comparative study of the ductile fracture criteria on the prediction of FLDs for aluminum alloys. Ksae . 2010: 969–974.
   Google Scholar
• Furushima T, Tsunezaki H, Manabe KI, et al. Ductile fracture and free surface roughening behaviors of pure copper foils for micro/meso-scale forming. Int J Mach Tools Manuf. 2014;76:34–48. doi: 10.1016/j.ijmachtools.2013.10.001
   Web of Science ®Google Scholar
• SemiatinH SL, Piehler R. Deformation of sandwich sheet materials in uniaxial tension. Metall Trans A. 1979;10:85–96.
   Web of Science ®Google Scholar
• Alcaraz JL. Instabilities in bimetallic layers. Int J Plast. 1999;15:1341–1358. doi: 10.1016/S0749-6419(99)00043-1
   Web of Science ®Google Scholar
• Yoshida RH F. Forming limit of stainless steel-clad aluminium sheets under plane stress condition. J Mater Process Technol. 1997;63:66–71.
   Web of Science ®Google Scholar
• Aghchai AJ, Shakeri M. Proceedings of the Institution of Mechanical Engineers. Part B: J Eng Manuf. 2008;222:1131–1138. doi: 10.1243/09544054JEM1140
   Web of Science ®Google Scholar
• Darabi R, Deilami H, Bagherzadeh S. Investigation into the effect of material properties and arrangement of each layer on the formability of bimetallic sheets. J Manuf Process. 2017;29:133–148. doi: 10.1016/j.jmapro.2017.07.022
   Web of Science ®Google Scholar
• Deilami H, Mehdi A, Roya S. Formability prediction of two-layer sheets based on ductile fracture criteria. Trans Indian Inst Met. 2016;70:1841–1847. doi: 10.1007/s12666-016-0986-5
   Web of Science ®Google Scholar
• FN ÃAZ, Rogers HC. The effect of roll and clad sheet geometry on the necking instability during rolling of clad sheet metals. Int J Mech Sci. 2006;48:868–877. doi: 10.1016/j.ijmecsci.2006.01.021
   Web of Science ®Google Scholar
• Seyyedi SE, Gorji orcid H, Bakhshi; G M, et al. Numerical and experimental investigation of effective parameters on formability of Al-St two layer sheet metals. Amirkabir J Mech Eng. 2016;50:517–528. doi: 10.22060/mej.2016.775
   Google Scholar
• Shahbazi-karami J. An investigation into the comparison between hot and cold forming of copper- aluminum composite tubes by utilizing hydroforming and gasforming processes. J Sci Technol Compos. 2017;4:205–218.
   Google Scholar
• Karami JS, Sheikhi MM, Manafi D, et al. Optimization of internal pressure and axial feed in metal composite Al-Cu tubes hydroforming process with genetic algorithm. J Sc Technol Compos. 2017;4:275–282.
   Google Scholar
• Karami JS, Sheikhi MM, Payganeh G. Experimental investigation and integration of finite element analysis and response surface method to multi. J Sci Technol Compos. 2017;7(1):661–674.
   Google Scholar
• Karajibani E, Hashemi R, Sedighi M. Forming limit diagram of aluminum-copper two-layer sheets: numerical simulations and experimental verifications. Int J Adv Manuf Technol. 2017;90:2713–2722. doi: 10.1007/s00170-016-9585-1
   Web of Science ®Google Scholar
• Tseng H, Hung C. An analysis of the formability of aluminum / copper clad metals with different thicknesses by the finite element method and experiment. Int J Adv Manuf Technol. 2010;49:1029–1036. doi: 10.1007/s00170-009-2446-4
   Web of Science ®Google Scholar
• Sun T, Liang J, Guo X, et al. Optical measurement of forming limit and formability of Cu / Al clad metals. J Mater Eng Perform. 2015;24:1426–1433. doi: 10.1007/s11665-015-1435-z
   Web of Science ®Google Scholar
• Marandi FA, Jabbari AH, Sedighi M, et al. An experimental, analytical, and numerical investigation of hydraulic bulge test in two-layer Al–Cu sheets. J Manuf Sci Eng. 2016. doi: 10.1115/1.4034717
   Web of Science ®Google Scholar
• Valinezhad M, Etemadi E, Hashemi R, et al. Experimental and FE analysis on spring-back of copper/aluminum layers sheet for a L-die bending process. Mater Res Express. 2019. doi: 10.1088/2053-1591/ab51c8
   Web of Science ®Google Scholar
• Rahmatabadi D, Mohammadi B, Hashemi R, et al. An experimental study of fracture toughness for Nano/ultrafine grained Al5052/Cu multilayered composite processed by accumulative roll bonding. J Manuf Sci Eng. Transactions of the ASME. 2018. doi: 10.1115/1.4040542
   Web of Science ®Google Scholar
• Rahmatabadi D, Tayyebi M, Hashemi R, et al. Evaluation of microstructure and mechanical properties of multilayer Al5052–Cu composite produced by accmulative roll bonding. Powder Metall Met Ceram. 2018;57:144–153. DOI:10.1007/s11106-018-9962-4.
   Web of Science ®Google Scholar
• Kwiecień M, Lisiecki Ł, Lisiecka-Graca P, et al. Study of deformation behavior of multilayered sheets using digital image correlation. Procedia Manuf. 2020;47:1257–1263. doi: 10.1016/j.promfg.2020.04.199
   Google Scholar
• Velmanirajan K, Abu AS, Narayanasamy R, et al. Numerical modelling of aluminium sheets formability using response surface methodology. Mater Des. 2012;41:239–254. doi: 10.1016/j.matdes.2012.05.027
   Web of Science ®Google Scholar
• Hecker SS. Simple technique for determining forming limit curves. Sheet Met Ind. 1975;52:671–676. doi: 10.1016/j.matdes.2018.10.043
   Google Scholar
• Amani H, Soltanieh M. Intermetallic phase formation in explosively welded Al / Cu bimetals. Metall Mater Trans B. 2016;47:2524–2534. doi: 10.1007/s11663-016-0682-1
   Web of Science ®Google Scholar
• Wiley MFJ, York N. (1950). Reviews the inelastic behavior of engineering materials and structures. 1950.
   Google Scholar
• Cockcroft MG, Latham DJ. Ductility and the workability of metals. J Inst Met. 1968;96(1):33–39.
   Google Scholar
• Brozzo P, Deluca BRR. (1972). A new method for the prediction of formability in metal sheets. Proceedings of the Seventh Biennial Conference of IDDRG on Sheet Metal Forming and Formability.
   Google Scholar
• Hill R. Mathematical proceedings of the Cambridge Philosophical Society: theoretical plasticity of textured aggregates. 2013. doi: 10.1017/S0305004100055596
   Google Scholar
• Azodi HD, Darabi R. A comparative study on the formability prediction of two-layer metallic sheets. Iran J Mater Form. 2017;4:39–51.
   Google Scholar
• Velmanirajan K, Anuradha K, Abu AS, et al. Science direct experimental investigation of forming limit, void coalescence and crystallographic textures of aluminum alloy 8011 sheet annealed at various temperatures. Arch Civ Mech Eng. 2013;14:398–416. doi: 10.1016/j.acme.2013.10.009
   Web of Science ®Google Scholar
• Voropai NV. AYS influence of heating on diffusion processes and properties of bimetallic joints of aluminium and copper. Metal Science and Heat Treatment. 1967;9(12):926–927.
   Google Scholar