References
- Vicario AA, Shanmuga Ramanan SM, Arun S. Composites in missiles and launch vehicles. Compr Compos Mater II. 2018;3:131–152.
- Acho L. Iterative learning control for homing guidance design of missiles. Defence Technol. 2017;13:360–366. doi: 10.1016/j.dt.2017.01.002
- Lim S, Mun J, Kim T, et al. Development of low-temperature high-strength integral steel castings for offshore construction by casting process engineering. Int J Nav Archit Ocean Eng. 2014;6:922–934. doi: 10.2478/IJNAOE-2013-0222
- Firdaouss M, Diez M, Samaille F. Manufacturing and characterization of stainless steel/CuCrZr and stainless steel/Cu junction ring by explosive welding method. Fusion Eng Des. 2017;207:124.
- Guo J, Qian D, Deng J. Grain refinement limit during hot radial ring rolling of as-cast GCr15 steel. J Mater Process Technol. 2016;231:151–161. doi: 10.1016/j.jmatprotec.2015.12.018
- Zeng G, Liu C, Gao Y, et al. Microstructure and mechanical properties of AZ80-Ag alloy processed by hot ring rolling. Mater Sci Eng A. 2016;674:491–497. doi: 10.1016/j.msea.2016.08.023
- Yao Y, Liu C, Gao Y, et al. Annealing-induced microstructural evolution and mechanical anisotropy improvement of the Mg-Gd-Y-Zr alloy processed by hot ring rolling. Mater Charact. 2018;144:641–651. doi: 10.1016/j.matchar.2018.08.022
- Han X, Hua L, Zhou G, et al. A new cylindrical ring rolling technology for manufacturing thin-walled cylindrical ring. Int J Mech Sci. 2014;81:95–108. doi: 10.1016/j.ijmecsci.2014.01.018
- Han X, Hua L, Zhou G, et al. FE simulation and experimental research on cylindrical ring rolling. J Mater Process Technol. 2014;214:1245–1258. doi: 10.1016/j.jmatprotec.2013.12.020
- Huang K, Logé RE. The flow stress evolution and grain refinement mechanisms during hot deformation of Al-Mg alloy. Procedia Eng. 2017;207:25–30. doi: 10.1016/j.proeng.2017.10.732
- Wei H, Xia F, Wang M. Effect of ingot grain refinement on the tensile properties of 2024 Al alloy sheets. Mater Sci Eng A. 2017;682:1–11. doi: 10.1016/j.msea.2016.11.016
- He H, Yi Y, Huang S, et al. An improved process for grain refinement of large 2219 Al alloy rings and its influence on mechanical properties. J Mater Sci Technol. 2019;35:55–63. doi: 10.1016/j.jmst.2018.09.007
- Afifi MA, Wang YC, Pereira PHR, et al. Mechanical properties of an Al-Zn-Mg alloy processed by ECAP and heat treatments. J Alloys Compd. 2018;769:631–639. doi: 10.1016/j.jallcom.2018.07.343
- Wang M, Huang L, Liu W, et al. Influence of cumulative strain on microstructure and mechanical properties of multi-directional forged 2A14 aluminum alloy. Mater Sci Eng A. 2016;674:40–51. doi: 10.1016/j.msea.2016.07.072
- Zuiko IS, Mironov S, Kaibyshev R. Microstructural evolution and strengthening mechanisms operating during cryogenic rolling of solutionized Al-Cu-Mg alloy. Mater Sci Eng A. 2019;745:82–89. doi: 10.1016/j.msea.2018.12.103
- Ren J, Chen Z, Peng J, et al. An initial report on achieving high comprehensive performance in an Al-Mg-Si alloy via novel thermomechanical processing. J Alloys Compd. 2018;764:679–683. doi: 10.1016/j.jallcom.2018.06.070
- Deng Y, Zhang Y, Wan L, et al. Effects of thermomechanical processing on production of Al-Zn-Mg-Cu alloy plate. Mater Sci Eng A. 2012;554:33–40. doi: 10.1016/j.msea.2012.05.102
- Chen X, Huang G, Liu S, et al. Grain refinement and mechanical properties of pure aluminum processed by accumulative extrusion bonding. Trans Nonferrous Met Soc China. 2019;29:437–447. doi: 10.1016/S1003-6326(19)64953-8
- Yin X, Deng W, Zou Y, et al. Ultrafine grained Al 7075 alloy fabricated by cryogenic temperature large strain extrusion machining combined with aging treatment. Mater Sci Eng A. 2019;762:138106. doi: 10.1016/j.msea.2019.138106
- Di Russo E, Conserva M, Buratti M, et al. A new thermo-mechanical procedure for improving the ductility and toughness of Al-Zn-Mg-Cu alloys in the transverse directions. Mater Sci Eng A. 1974;14:23–36. doi: 10.1016/0025-5416(74)90120-7
- Zuo J, Hou L, Shi J, et al. The mechanism of grain refinement and plasticity enhancement by an improved thermomechanical treatment of 7055 Al alloy. Mater Sci Eng A. 2017;702:42–52. doi: 10.1016/j.msea.2017.06.106
- Sitdikov O, Sakai T, Miura H, et al. Temperature effect on fine-grained structure formation in high-strength Al alloy 7475 during hot severe deformation. Mater Sci Eng A. 2009;516:180–188. doi: 10.1016/j.msea.2009.03.037
- Mei L, Chen XP, Huang GJ, et al. Improvement of mechanical properties of a cryorolled Al-Mg-Si alloy through warm rolling and aging. J Alloys Compd. 2019;777:259–263. doi: 10.1016/j.jallcom.2018.11.012
- Li R, Liu Z, Dong F, et al. Grain refinement of a large-scale Al alloy casting by introducing the multiple ultrasonic generators during solidification. Metall Mater Trans A. 2016;47:3790–3796. doi: 10.1007/s11661-016-3576-6
- Zhang JX, Sun HY, Li J, et al. Effect of precipitation state on recrystallization texture of continuous cast AA 2037 aluminum alloy. Mater Sci Eng A. 2019;754:491–501. doi: 10.1016/j.msea.2019.03.107
- Cheng G, Hu X, Frazier WE, et al. Effect of second phase particles and stringers on microstructures after rolling and recrystallization. Mater Sci Eng A. 2018;736:41–52. doi: 10.1016/j.msea.2018.08.040
- Zou X, Yan H, Chen X. Evolution of second phases and mechanical properties of 7075 Al alloy processed by solution heat treatment. Trans Nonferrous Met Soc China. 2017;27:2146–2155. doi: 10.1016/S1003-6326(17)60240-1
- Miszczyk MM, Paul H, Driver JH, et al. Recrystallization nucleation in stable aluminium-base single crystals: crystallography and mechanisms. Acta Mater. 2017;125:109–124. doi: 10.1016/j.actamat.2016.11.054
- He H, Yi Y, Cui J, et al. Hot deformation characteristics and processing parameter optimization of 2219 Al alloy using constitutive equation and processing map. Vacuum. 2019;160:293–302. doi: 10.1016/j.vacuum.2018.11.048
- Mikhaylovskaya AV, Ryazantseva MA, Portnoy VK. Effect of eutectic particles on the grain size control and the superplasticity of aluminium alloys. Mater Sci Eng A. 2011;528:7306–7309. doi: 10.1016/j.msea.2011.06.042
- Ramesh CS, Keshavamurthy R, Koppad PG, et al. Role of particle stimulated nucleation in recrystallization of hot extruded Al 6061/SiCp composites. Trans Nonferrous Met Soc China. 2013;23:53–58. doi: 10.1016/S1003-6326(13)62428-0
- Zener C. Theory of growth of spherical precipitates from solid solution. J Appl Phys. 1949;20:950–953. doi: 10.1063/1.1698258