Processing, microstructure, properties and fracture behaviour of Ti–6Al–4V manufactured from pre-alloyed powder

References

• Donachie MJ. Ingot metallurgy and mill products. Titanium: a technical guide. 2nd ed. ASM International. Materials Park, Ohio; 2000; p. 25–32.
   Google Scholar
• Lutjering G, Williams JC. Technological aspects. Titanium. 2nd ed. Springer. Heidelberg; 2007. p. 59–64.
   Google Scholar
• Abkowitz S, Abkowitz S, Fisher H. Titanium alloy components manufacture from blended elemental powder and the qualification process. In: Froes MQH, editor. Titanium powder metallurgy. Boston: Butterworth-Heinemann; 2015. p. 299–312.
   Google Scholar
• Abkowitz S, Abkowitz S, Fisher H, et al. Breakthrough claimed for titanium PM. Met Powder Rep. 2011;66(6):16–21.
   Google Scholar
• Froes F, Mashl S, Hebeisen J, et al. The technologies of titanium powder metallurgy. JOM. 2004;56(11):46–48.
   Web of Science ®Google Scholar
• Moxson VS, Senkov ON, Froes FH. Innovations in titanium powder processing. JOM. 2000;52(5):24–26.
   Web of Science ®Google Scholar
• Gabbitas B, Yang F, Raynova S, et al. Cost effective forging of titanium alloy parts and their mechanical properties. Adv Mater Res. 2014;1019:3–10.
   Google Scholar
• Bolzoni L. Strategies and initiatives for cost-affordable PM Ti alloys: compositions and manufacturing. Powder Metall Rev. 2019;8(3):71–81.
   Google Scholar
• Singh AP, Gabbitas B, Yang F, et al. Effect of pre-consolidation methods and oxygen on the mechanical properties of as-extruded Ti-6Al-4V alloy rod. Proceedings of the 13th World Conference on Titanium; John Wiley & Sons, Inc.; 2016. p. 1347–1354.
   Google Scholar
• Singh AP, Yang F, Torrens R, et al. Solution treatment of Ti-6Al-4V alloy produced by consolidating blended powder mixture using a powder compact extrusion route. Mater Sci Eng A. 2018;712:157–165.
   Web of Science ®Google Scholar
• Singh AP, Yang F, Torrens R, et al. The effect of heat treatment on the mechanical properties of Ti–6Al–4V alloy produced by consolidating a high impurity blended powder mixture using a combination of powder compact hot pressing and extrusion. J Mater Res. 2019;34(8):1426–1438.
   Web of Science ®Google Scholar
• Singh AP, Yang F, Torrens R, et al. Heat treatment, impact properties, and fracture behaviour of Ti-6Al-4V alloy produced by powder compact extrusion. Materials. 2019;12(23):3824.
   PubMed Web of Science ®Google Scholar
• Zherebtsov S, Kudryavtsev E, Kostjuchenko S, et al. Strength and ductility-related properties of ultrafine grained two-phase titanium alloy produced by warm multiaxial forging. Mater Sci Eng A. 2012;536:190–196.
   Web of Science ®Google Scholar
• Wang L, Lang ZB, Shi HP. Properties and forming process of prealloyed powder metallurgy Ti-6Al-4V alloy. Trans Nonferrous Metals Soc China. 2007;17:s639–s643.
   Web of Science ®Google Scholar
• ASTM B988-18. Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components. ASTM International. West Conshohocken, PA; 2018, www.astm.org.
   Google Scholar
• El-Soudani SM, Yu KO, Crist EM, et al. Optimization of blended-elemental powder-based titanium alloy extrusions for aerospace applications. Metall Mater Trans A. 2013;44(2):899–910.
   Web of Science ®Google Scholar
• Donachie MJ. Titanium: a technical guide. 2nd ed. Materials Park, Ohio: ASM International; 2000.
   Google Scholar
• Wang H, Zak Fang Z, Sun P. A critical review of mechanical properties of powder metallurgy titanium. Int J Powder Metall. 2010;46(5):45–57.
   Web of Science ®Google Scholar
• Reda R, Nofal A, Hussein A-H. Effect of single and duplex stage heat treatment on the microstructure and mechanical properties of cast Ti-6Al-4V alloy. Metallogr Microstruct Anal. 2013;2(6):388–393.
   Google Scholar
• Yasa E, Deckers J, Kruth JP, et al. Experimental investigation of Charpy impact tests on metallic SLM parts. In: Bartolo PJD, DeLemos ACS, Pereira AMH, et al., editors. Innovative developments in design and manufacturing: advanced research in virtual and rapid prototyping. Boca Raton (FL): CRC; 2010. p. 207–214.
   Google Scholar