149
Views
13
CrossRef citations to date
0
Altmetric
Research Article

Study of novel, thermally resistant Mg alloy with dual-phase

, ORCID Icon, &
Pages 1-5 | Received 23 Sep 2020, Accepted 01 Dec 2020, Published online: 17 Dec 2020

References

  • Geng Z, Xiao DH, Chen L. Microstructure, mechanical properties, and corrosion behavior of degradable Mg-Al-Cu-Zn-Gd alloys. J Alloys Compd. 2016;686:145–152.
  • Chen L, Wu Z, Xiao D-H, et al. Effects of copper on the microstructure and properties of Mg–17Al–3Zn alloys. Mater Corros. 2015;66(10):1159–1168.
  • Wei L, Li J, Zhang Y, et al. Effects of Zn content on microstructure, mechanical and Degradation Behaviors of Mg-xZn-0.2Ca-0.1Mn alloys. Mater Chem Phys. 2020;241(1):1–9
  • Niu H, Cao F, Deng K, et al. Microstructure and corrosion behavior of the as-extruded Mg–4Zn–2Gd–0.5Ca alloy. Acta Metall Sin (English Lett). 2020;33(3):362–374.
  • Kaviani M, Ebrahimi GR, Ezatpour HR. Improving the mechanical properties and biocorrosion resistance of extruded Mg-Zn-Ca-Mn alloy through hot deformation. Mater Chem Phys. 2019;234:245–258.
  • Solomon ELS, Marquis EA. Deformation behavior of β′ and β’’’ precipitates in Mg-RE alloys. Mater Lett. 2018;216:67–69.
  • Jung I, Sanjari M, Kim J, et al. Role of RE in the deformation and recrystallization of Mg alloy and a new alloy design concept for Mg–RE alloys. Scr Mater. 2015;102:1–6.
  • Hantzsche K, Bohlen J, Wendt J, et al. Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets. Scr Mater. 2010;63(7):725–730.
  • Erlin Zhang YD, Xu L, et al. Microstructure, mechanical and corrosion properties and biocompatibility of Mg–Zn–Mn alloys for biomedical application. Mater Sci Eng C. 2009;29(1):987–993.
  • Chen J, Wei S, Tan L, et al. Effects of solution treatment on mechanical properties and degradation of Mg-2Zn-0.5Nd-0.5Zr alloy. Mater Technol. 2019;34: 592–601.
  • Jin S, Zhang D, Lu X, et al. Mechanical properties, biodegradability and cytocompatibility of biodegradable Mg-Zn-Zr-Nd/Y alloys. J Mater Sci Technol. 2020;47:190–201.
  • Somekawa H, Basha DA, Singh A, et al. Non-basal dislocation nucleation site of solid solution magnesium alloy. Mater Trans. 2020;61(6):1172–1175.
  • Zhang T, Tokunaga T, Ohno M, et al. Low temperature superplasticity of a dual-phase Mg-Li-Zn alloy processed by a multi-mode deformation process. Mater Sci Eng Part A. 2018: 61–68.
  • Zhong F, Wang Y, Wu R, et al. Effect of rolling temperature on deformation behavior and mechanical properties of Mg-8Li-1Al-0.6Y-0.6Ce alloy. J Alloys Compd. 2020;831:1–11.
  • Meng X, Wu R, Zhang M, et al. Microstructures and properties of superlight Mg-Li-Al-Zn wrought alloys. J Alloys Compd. 2009;486(1-2):722–725.
  • Wu L, Cui C, Wu R, et al. Effects of Ce-rich RE additions and heat treatment on the microstructure and tensile properties of Mg-Li-Al-Zn-based alloy. Mater Sci Eng Part A. 2011;528(4):2174–2179.
  • Zhu T, Cui C, Zhang T, et al. Influence of the combined addition of Y and Nd on the microstructure and mechanical properties of Mg–Li alloy. Mater Des. 2014;57:245–249.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.