References
- Hyde KB, Norman AF, Prangnell PB. The effect of cooling rate on the morphology of primary Al3Sc intermetallic particles in Al-Sc alloys. Acta Mater. 2001;49(8):1327–1337.
- Fu JW, Yang YS, Guo JJ, et al. Effect of cooling rate on solidification microstructures in AISI 304 stainless steel. Mater Sci Technol. 2008;24(8):941–944.
- Pang S, Wu G, Liu W, et al. Effect of cooling rate on the microstructure and mechanical properties of sand-casting Mg–10Gd–3Y–0.5Zr magnesium alloy. Mater Sci Eng A. 2013;562:152–160.
- Tang H-P, Wang Q-D, Lei C, et al. Effect of cooling rate on microstructure and mechanical properties of an Al-5.0Mg-3.0Zn-1.0Cu cast alloy. J Alloys Compd. 2019;801:596–608.
- Liang G, Ali Y, You G, et al. Effect of cooling rate on grain refinement of cast aluminium alloys. Materialia. 2018;3:113–121.
- Bogno A, Nguyen-Thi H, Reinhart G, et al. Growth and interaction of dendritic equiaxed grains: in situ characterization by synchrotron X-ray radiography. Acta Mater. 2013;61(4):1303–1315.
- Wang B, Tan D, Lee TL, et al. Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound. Acta Mater. 2018;144:505–515.
- Mathiesen RH, Arnberg L, Bleuet P, et al. Crystal fragmentation and columnar-to-equiaxed transitions in Al-Cu studied by synchrotron X-ray video microscopy. Metall Mater Trans A. 2006;37(8):2515–2524.
- Shuai S, Guo E, Phillion AB, et al. Fast synchrotron X-ray tomographic quantification of dendrite evolution during the solidification of Mg Sn alloys. Acta Mater. 2016;118:260–269.
- Wang T, Xu J, Xiao T, et al. Evolution of dendrite morphology of a binary alloy under an applied electric current: an in situ observation. Phys Rev E. 2010;81:042601.
- Xuan Z, Mao F, Cao Z, et al. In situ observation on the solidification of Sn-10Cu hyperperitectic alloy under direct current field by synchrotron microradiography. J Alloys Compd. 2017;721:126–133.
- Liotti E, Lui A, Kumar S, et al. The spatial and temporal distribution of dendrite fragmentation in solidifying Al-Cu alloys under different conditions. Acta Mater. 2016;121:384–395.
- Cao F, Yang F, Kang H, et al. Effect of traveling magnetic field on solute distribution and dendritic growth in unidirectionally solidifying Sn-50 wt-%Pb alloy: an in situ observation. J Cryst Growth. 2016;450:91–95.
- Huang H, Shu D, Fu Y, et al. Synchrotron radiation X-ray imaging of cavitation bubbles in Al-Cu alloy melt. Ultrason Sonochem. 2014;21(4):1275–1278.
- Wang F, Eskin D, Mi J, et al. A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35Cu alloy induced by ultrasonic melt processing. Acta Mater 2017;141:142–153.
- Seo S-M, Kim I-S, Lee J-H, et al. Grain structure and texture evolutions during single crystal casting of the Ni-base superalloy CMSX-4. Met Mater Int. 2009;15(3):391–398.
- Matache G, Stefanescu DM, Puscasu C, et al. Investigation of solidification microstructure of single crystal CMSX-4 superalloy – experimental measurements and modelling predictions. Int J Cast Metal Res. 2015;28(6):323–336.
- Kund NK, Dutta P. Numerical study of influence of oblique plate length and cooling rate on solidification and macrosegregation of A356 aluminum alloy melt with experimental comparison. J Alloys Compd. 2016;678:343–354.
- Szeliga D, Kubiak K, Burbelko AA, et al. Modelling of grain microstructure of IN-713C castings. Solid State Phenom. 2013;197:83–88.
- Kermanpur A, Rappaz M, Varahram N, et al. Thermal and grain-structure simulation in a land-based turbine blade directionally solidified with the liquid metal cooling process. Metall Mater Trans B. 2000;31(6):1293–1304.
- Luo S, Yang G, Xiao L, et al. Effect of the melt superheat on equiaxed solidification of Al-20 wt% Cu alloy investigated by in situ synchrotron radiography. J Cryst Growth. 2017;476:38–44.
- Bogno A, Nguyen-Thi H, Billia B, et al. In situ analysis of dendritic equiaxed microstructure formation in Al-Cu alloys by synchrotron X-ray radiography. Trans Indian Inst Met. 2009;62(4-5):427–431.
- Zhu J, Wang T, Cao F, et al. Real time observation of equiaxed growth of Sn-Pb alloy under an applied direct current by synchrotron microradiography. Mater Lett. 2012;89:137–139.
- Yang F, Chen Z, Cao F, et al. Grain nucleation and growth behavior of a Sn-Pb alloy affected by direct current: an in situ investigation. J Mater Sci Technol. 2017;33:1134–1140.
- Kurz W, Fisher DJ. Fundamentals of solidification. Switzerland: Trans Tech; 1989.