Complex reaction behaviour of ceramic mould with the molten AZ91 alloy during investment casting

References

• Pan F, Yang M, Chen X. A review on casting magnesium alloys: modification of commercial alloys and development of new alloys. J Mater Sci Technol. 2016;32:1211–1221.
   Web of Science ®Google Scholar
• Pattnaik S, Benny Karunakar D, Jha PK. Developments in investment casting process-a review. J Mater Process. Tech. 2012;212:2332–2348.
   Web of Science ®Google Scholar
• Jafari H, Idris M, Ourdjini A. A review of ceramic shell investment casting of magnesium alloys and mold-metal reaction suppression. Mater Manuf Process. 2013;28:843–856.
   Web of Science ®Google Scholar
• Kim MG, Kim YJ. Investigation of interface reaction between TiAl alloys and mold materials. Metals Mater Int. 2002;8:289–293.
   Web of Science ®Google Scholar
• Yuan C, Cheng X, Holt GS, et al. Investment casting of Ti-46Al-8Nb-1B alloy using moulds with CaO-stabilized zirconia face coat at various mould pre-heat temperatures. Ceramics Int. 2015;41:4129–4139.
   Web of Science ®Google Scholar
• Sin L, Dube S, Tremblay DR. Interfacial reactions between AZ91D magnesium alloy and plaster mould material during investment casting. mater. Sci Techol. 2006;22:1456–1463.
   Google Scholar
• Pattnaik S. Investigation on controlling the process parameters for improving the quality of investment cast parts. J Braz Soc Mech Sci Eng. 2018;40:318.
   Web of Science ®Google Scholar
• Idris MH, Ourdjini A, Hamzah E., Suppression of mold-metal reactions during investment casting. Magnesium Alloys App. Wiley-VCH Verlag GmbH & Co. KGaA, 2000: 628–634.
   Google Scholar
• Hao Y, Liu J, Du J, et al. Effects of mold materials on the interfacial reaction between magnesium alloy and ceramic shell mold during investment casting. Metals (Basel). 2020;10:991.
   Web of Science ®Google Scholar
• Reddy SM, Reddy AC. interfacial reaction between magnesium alloy and magnesia ceramic shell mold. In National Conference on Advanced Materials and Manufacturing Technologies; Hyderabad; 2000. p. 218–222.
   Google Scholar
• Lopes V, Puga H, Barbosa J, et al. Effect of yttria mould coating on the investment casting of AZ91D-1 wt% CaO magnesium alloy. Inter J Metalcast. 2020;14:98–107.
   Web of Science ®Google Scholar
• Jafari H, Idris MH, Ourdjini A, et al. An investigation on interfacial reaction between in-situ melted AZ91D magnesium alloy and ceramic shell mold during investment casting process. Mater Chem Phys. 2013;138:672–681.
   Web of Science ®Google Scholar
• Zhang Z, Morin G. Effect of inhibitor gas on mouldmagnesium reactions in investment casting. . In: Alen A. Luo, editor. Magnesium Tech. Vol. 197 TMS; 2004. p. 197–202.
   Google Scholar
• Herrero-Dorca N, Etxeberria HS, Hurtado I, et al. Analysis of different inhibitors for magnesium investment casting. IOP Conf Series: Mater Sci Eng. 2011;27:012072.
   Google Scholar
• Jafari H, Idris MH, Ourdjini A. An alternative approach in ceramic shell investment casting of AZ91D magnesium alloy In situ melting technique. J Mater. 2014;214:988–997.
   Web of Science ®Google Scholar
• Han G, Liu X. Phase control and formation mechanism of Al-Mn (-Fe) intermetallic particles in Mg-Al-based alloys with FeCl3 addition or melt superheating. Acta Mater. 2016;114:54–66.
   Web of Science ®Google Scholar
• Reyes RV, Bello TS, Kakitani R, et al. Tensile properties and related microstructural aspects of hypereutectic Al-Si alloys directionally solidified under different melt superheats and transient heat flow conditions. Mater Sci Eng: A. 2017;685:235–243.
   Web of Science ®Google Scholar
• Chaus AS, Bračík M, Čaplovič L. Interaction between ceramic molds and high-speed steel during gravity and vacuum investment casting. J. Mater Eng Perform. 2019;28:4774–4789.
   Web of Science ®Google Scholar
• Predel F. Phase equilibria, crystallographic and thermodynamic data of binary alloys KO … Y-Zr. Berlin: Springer; 2016.
   Google Scholar
• Afsharnaderi A, Malekan M, Emamy M, et al. Microstructure evolution and mechanical properties of the AZ91 magnesium alloy with Sr and Ti additions in the As-cast and As-aged conditions. J. Materi Eng and Perform. 2019;28:6853–6863.
   Web of Science ®Google Scholar
• Idris MH. Processing and evaluation of an investment cast magnesium-base alloys [disseration]. Universiti Teknologi Malaysia, 2001.
   Google Scholar
• Candan S, Celik M, Candan E. Effectiveness of Ti-micro alloying in relation to cooling rate on corrosion of AZ91 Mg alloy. J Alloys Compd. 2016;672:197–203.
   Web of Science ®Google Scholar
• Cho C-Y, Uan J-Y, Tsai T-C. Effect of cooling rate on Mg17Al12 volume fraction and compositional inhomogeneity in a sand-cast AZ91D magnesium plate. Mater Trans. 2006;47:2060–2067.
   Web of Science ®Google Scholar
• Pang S, Wu G, Liu W, et al. Effect of cooling rate on the microstructure and mechanical properties of sand-casting Mg–10Gd–3Y–0.5Zr magnesium alloy. Mater Sci Eng. C. 2013;562:152–160.
   Web of Science ®Google Scholar
• Kim KH. Formation of endogenous MgO and MgAl2O4 particles and their possibility of acting as substrate for heterogeneous nucleation of aluminum grains. Surf Interface Anal. 2015;47:429–438.
   Web of Science ®Google Scholar
• Bhatt YJ, Garg SP. Thermodynamic study of liquid aluminum-magnesium alloys by vapor pressure measurements. Metall Trans B. 1976;7:271–275.
   Web of Science ®Google Scholar