References
- Brizmer V, Gabelli A, Vieillard C, et al. An experimental and theoretical study of hybrid bearing micropitting performance under reduced lubrication. Tribol Trans. 2015 Sep;58(5):829–835. Available from: http://www.tandfonline.com/doi/full/10.1080/10402004.2015.1021944
- Brizmer V, Stadler K, van Drogen M, et al. The tribological performance of black oxide coating in rolling/Sliding contacts. Tribol Trans. 2017 May;60(3):557–574. Available from: http://dx.doi.org/10.1080/10402004.2016.1186258 https://www.tandfonline.com/doi/full/10.1080/10402004.2016.1186258
- Brizmer V, Matta C, Nedelcu I, et al. The influence of tribolayer formation on tribological performance of rolling/Sliding contacts. Tribol Lett. 2017 Jun;65(2):57. Available from: http://link.springer.com/10.1007/s11249-017-0839-3
- Vieillard C, Kadin Y, Morales-Espejel G, et al. An experimental and theoretical study of surface rolling contact fatigue damage progression in hybrid bearings with artificial dents. Wear. 2016 Oct;364–365:211–223. Available from: http://dx.doi.org/10.1016/j.wear.2016.07.016 https://linkinghub.elsevier.com/retrieve/pii/S0043164816301582
- Morales-Espejel GE, Brizmer V. Micropitting modelling in Rolling–Sliding contacts: application to rolling bearings. Tribol Trans. 2011 Jul;54(4):625–643. Available from: http://www.tandfonline.com/doi/abs/10.1080/10402004.2011.587633
- Brizmer V, Pasaribu HR, Morales-Espejel GE. Micropitting performance of oil additives in lubricated rolling contacts. Tribol Trans. 2013 Sep;56(5):739–748. Available from: http://dx.doi.org/10.1080/10402004.2013.790097 http://www.tandfonline.com/doi/full/10.1080/10402004.2013.790097
- Popescu G, Morales-Espejel GE, Wemekamp B, et al. An engineering model for three-dimensional elastic-Plastic rolling contact analyses. Tribol Trans. 2006 Sep;49(3):387–399. Available from: http://www.tandfonline.com/doi/abs/10.1080/05698190600678739
- Vegter RH, Slycke JT, Beswick J, et al. The role of hydrogen on rolling contact fatigue response of rolling element bearings. J ASTM Int. 2010;7(2):102543. Available from: http://www.astm.org/doiLink.cgi?JAI102543
- Merwin JE, Johnson KL. An analysis of plastic deformation in rolling contact. Proc Inst Mech Engin. 1963 Jun;177(1):676–690. Available from: http://journals.sagepub.com/doi/10.1243/PIME_PROC_1963_177_052_02
- Bhadeshia H. Steels for bearings. Prog Mater Sci. 2012 Feb;57(2):268–435. Available from: http://dx.doi.org/10.1016/j.pmatsci.2011.06.002 http://linkinghub.elsevier.com/retrieve/pii/S0079642511000922
- El Laithy M, Wang L, Harvey TJ, et al. Further understanding of rolling contact fatigue in rolling element bearings – a review. Tribol Int. 2019 Dec;140(April):105849. Available from: https://linkinghub.elsevier.com/retrieve/pii/S0301679X19303561
- Ooi SW, Gola A, Vegter RH, et al. Evolution of white-etching cracks and associated microstructural alterations during bearing tests. Mater Sci Technol (UK). 2017;33(14):1657–1666. Available from: http://dx.doi.org/10.1080/02670836.2017.1310431
- Lai J, Stadler K. Investigation on the mechanisms of white etching crack (WEC) formation in rolling contact fatigue and identification of a root cause for bearing premature failure. Wear. 2016 Oct;364–365:244–256. Available from: https://linkinghub.elsevier.com/retrieve/pii/S0043164816301636
- Swahn H, Becker PC, Vingsbo O. Martensite decay during rolling contact fatigue in ball bearings. Metal Trans A. 1976 Aug;7(8):1099–1110. Available from: http://link.springer.com/10.1007/BF02656592
- Schlicht H, Schreiber E, Zwirlein O. Effects of material properties on bearing steel fatigue strength. In: Effect of steel manufacturing processes on the quality of bearing steels. West Conshohocken (PA): ASTM International; 1988. p. 81–81–21. Available from: http://www.astm.org/doiLink.cgi?STP26228S.
- Warhadpande A, Sadeghi F, Evans RD. Microstructural alterations in bearing steels under rolling contact fatigue part 1–Historical overview. Tribol Trans. 2013 May;56(3):349–358. Available from: http://www.tandfonline.com/doi/abs/10.1080/10402004.2012.754073
- Gabelli A, Morales-Espejel GE. A model for hybrid bearing life with surface and subsurface survival. Wear. 2019 Mar;422–423(January):223–234. Available from: https://doi.org/10.1016/j.wear.2019.01.050 https://linkinghub.elsevier.com/retrieve/pii/S0043164818312894
- Voskamp AP. Microstructural changes during rolling rolling contact fatigue [Doctoral thesis]. Delft University of Technology; 1997. Available from: http://resolver.tudelft.nl/uuid:783a0a39-6062-4326-b493-a4dee0efef92.
- Vasilca G, Raszillier V. A study of dark etching area (D.E.A.) type structure modification of material and hertzian contact area induced by ball bearing type motion. Wear. 1972;19(1):1–15.
- Abdullah MU, Khan ZA, Kruhoeffer W. Evaluation of dark etching regions for standard bearing steel under accelerated rolling contact fatigue. Tribol Int. 2020 Dec;152:106579. Available from: https://linkinghub.elsevier.com/retrieve/pii/S0301679X20304096
- Lundberg G, Palmgren A. Dynamic capacity of rolling bearings. Acta Polytech Mech Engin Ser. 1947;1:4–51.
- Dieter G. Mechanical metallurgy. Boston (MA): McGraw-Hill; 1986.
- Carter TL, Zaretsky EV, Anderson WJ. Effect of hardness and other mechanical properties on rolling-contact fatigue life of four high-temperature bearing steels. Cleveland (OH): National Aeronautics and Space Administration; 1960. NASA-TN-D-270.
- Jones AB. Metallographic observations of ball bearing fatigue phenomena. In: Symposium on testing of bearings. West Conshohocken (PA): ASTM International; 1946. p. 35–35–18. Available from: http://www.astm.org/doiLink.cgi?STP42598S.
- Swahn H, Becker PC, Vingsbo O. Electron-microscope studies of carbide decay during contact fatigue in ball bearings. Metal Sci. 1976 Jan;10(1):35–39. Available from: http://www.tandfonline.com/doi/full/10.1179/030634576790431444
- Österlund R, Vingsbo O. Phase changes in fatigued ball bearings. Metal Trans A. 1980 May;11(5):701–707. Available from: http://link.springer.com/10.1007/BF02661199
- Becker PC, Swahn H, Vingsbo O. Structural changes in ball bearing steels caused by rolling contact fatigue. Mechanique Matériaux électricité. 1976;320–321:8–14.
- Kuroda M. On the mechanism of flaking due to rolling fatigue of ball and roller bearing steels. Trans Jpn Soc Mech Eng. 1960;26(169):1258–1271. Available from: https://www.jstage.jst.go.jp/article/cpb1958/33/4/33_4_1660/_article http://joi.jlc.jst.go.jp/JST.Journalarchive/kikai1938/26.1258?from=CrossRef
- Muro H, Tsushima N. Microstructural, microhardness and residual stress changes due to rolling contact. Wear. 1970 May;15(5):309–330. Available from: http://linkinghub.elsevier.com/retrieve/pii/0043164870901766 http://joi.jlc.jst.go.jp/JST.Journalarchive/kikai1938/26.1258?from=CrossRef
- Tunca N, Laufer EE. Wear mechanisms and finite element crack propagation analysis of high speed roller bearings. Wear. 1987;118(1):77–97.
- Bush JJ, Grube WL, Robinson GH. Microstructural and residual stress changes in hardened steel due to rolling contact. Trans Amer Soc Metals. 1961;54:390–412. 818–823
- Martin JA, Borgese SF, Eberhardt AD. Microstructural alterations of rolling-bearing steel undergoing cyclic stressing. J Basic Eng. 1966;88(3):555. Available from: http://fluidsengineering.asmedigitalcollection.asme.org/article.aspx?articleid=1432755
- Shibata M, Lee H. Long life bearing made of greater toughness bearing steel. Koyo Eng J. 1992;(141):26–30.
- Hyde RS. Contact fatigue of hardened steels. In: Fatigue and fracture. ASM International; 1996. p. 691–703. Available from: https://dl.asminternational.org/books/book/34/chapter/459507/contact-fatigue-of-hardened-steels.
- Polonsky I, Keer LM. On white etching band formation in rolling bearings. J Mech Phys Solids. 1995 Apr;43(4):637–669. Available from: http://linkinghub.elsevier.com/retrieve/pii/002250969500001Y https://linkinghub.elsevier.com/retrieve/pii/002250969500001Y
- Barrow A, Rivera-Díaz-del Castillo P. Nanoprecipitation in bearing steels. Acta Mater. 2011 Nov;59(19):7155–7167. Available from: https://linkinghub.elsevier.com/retrieve/pii/S135964541100574X
- Zhukov V, Gubanov V, Jarlborg T. Study of energy-band structures, some thermomechanical properties and chemical bonding for a number of refractory metal carbides by the LMTO-ASA method. J Phys Chem Solids. 1985 Jan;46(10):1111–1116. Available from: http://linkinghub.elsevier.com/retrieve/pii/0022369785901398
- Yajima E, Miyazaki T, Sugiyama T, et al. Effects of retained austenite on the rolling fatigue life of ball bearing steels. Trans Jpn Inst Met. 1974;15(3):173–179.
- Tricot R, Monnot J, Lluansi M. How microstructural alterations affect fatigue properties of 52100 steel. Met Eng Q. 1972;12:39–47.
- Shiko S, Okamoto K, Watanabe S. Effect of metallographical factors on the rolling fatigue life of ball bearing steel. Tetsu-to-Hagane. 1968;54(13):1353–1366. Available from: https://www.jstage.jst.go.jp/article/tetsutohagane1955/54/13/54_13_1353/_article/-char/ja/
- Aoki K, Nagumo M, Sugino K. Some metallurgical problems on the life of rolling bearing. Nippon Steel; Technical report overseas; January 1973. 2.
- Bhadeshia HKDH, Honeycombe R. Steels: microstructure and properties. Elsevier; 2006. Available from: https://linkinghub.elsevier.com/retrieve/pii/B9780750680844X50006.
- Leslie W, Hornbogen E. Physical metallurgy of steels. In: Physical metallurgy. Elsevier; 1996. p. 1555–1620. Available from: https://linkinghub.elsevier.com/retrieve/pii/B9780444898753500223.
- Andersson JE, Wicks G, Olund PLJ. Raceway grooving: a tool for monitoring microstructural changes. In: Bearing steel technologies: 9th volume, advances in rolling contact fatigue strength testing and related substitute technologies. West Conshohocken (PA): ASTM International; 2012. p. 291–302. Available from: http://www.astm.org/doiLink.cgi?STP104643.
- Ande CK, Sluiter MH. First-principles prediction of partitioning of alloying elements between cementite and ferrite. Acta Mater. 2010 Nov;58(19):6276–6281. Available from: http://linkinghub.elsevier.com/retrieve/pii/S1359645410004933
- Simonovic D, Ande CK, Duff AI, et al. Diffusion of carbon in bcc Fe in the presence of Si. Phys Rev B. 2010 Feb;81(5):054116. Available from: https://link.aps.org/doi/10.1103/PhysRevB.81.054116
- Bhadeshia HKDH, Solano-Alvarez W. Critical assessment 13: elimination of white etching matter in bearing steels. Mater Sci Technol. 2015 Jul;31(9):1011–1015. Available from: http://www.tandfonline.com/doi/full/10.1179/1743284715Y.0000000036
- Mitamura N, Hidaka H, Takaki S. Microstructural development in bearing steel during rolling contact fatigue. Mater Sci Forum. 2007 Mar;539–543:4255–4260. Available from: http://www.scientific.net/MSF.539-543.4255 https://www.scientific.net/MSF.539-543.4255
- Lund T. Structural alterations in fatigue-tested ball-bearing steel. Jernkontorets Ann. 1969;153(7):337–343.
- Mughbrabi H, Ackermann F, Herz K. Persistent slipbands in fatigued face-centered and body-centered cubic metals. In: Fatigue mechanisms. West Conshohocken (PA): ASTM International; 1979. p. 69–69–37. Available from: http://www.astm.org/doiLink.cgi?STP35885S.
- Fu H. Microstructural alterations in bearing steels under rolling contact fatigue [Doctoral thesis]. University of Cambridge; 2017. Available from: https://www.repository.cam.ac.uk/handle/1810/270311.
- Fu H, Song W, Galindo-Nava EI, et al. Strain-induced martensite decay in bearing steels under rolling contact fatigue: modelling and atomic-scale characterisation. Acta Mater. 2017 Oct;139:163–173. Available from: http://dx.doi.org/10.1016/j.actamat.2017.08.005 http://linkinghub.elsevier.com/retrieve/pii/S1359645417306481
- Šmeļova V, Schwedt A, Wang L, et al. Microstructural changes in White etching cracks (WECs) and their relationship with those in dark etching region (DER) and White etching bands (WEBs) due to rolling contact fatigue (RCF). Int J Fatigue. 2017 Jul;100:148–158. Available from: http://linkinghub.elsevier.com/retrieve/pii/S014211231730141X
- King AH, O'Brien JL. Microstructural alterations in rolling contact fatigue. In: Advances in electron metallography: Vol. 6. West Conshohocken (PA): ASTM International; 1965. p. 74–74–15. Available from: http://www.astm.org/doiLink.cgi?STP46420S.
- Scott D, Blackwell J. Paper 17: study of sintered carbides and surface-Treated materials for unlubricated and elevated temperature rolling elements. Proc Inst Mech Engin Conf Proc. 1966 Jun;181(15):77–84. Available from: http://journals.sagepub.com/doi/10.1243/PIME_CONF_1966_181_301_02
- Turkalo AM. An electron transmission stndy of the tempering of martensite in a 0.42 ∖% carbon steel. Trans ASM. 1961;54:344.
- Scott D. Rolling contact fatigue. In: Structural integrity. Vol. 9. Academic Press, Inc.; 1979. p. 321–361. Available from: http://dx.doi.org/10.1016/S0161-9160(13)70072-3 https://linkinghub.elsevier.com/retrieve/pii/S0161916013700723.
- Harada H, Mikami T, Shibata M, et al. Microstructural changes and crack initiation with White etching area formation under rolling/Sliding contact in bearing steel. ISIJ Int. 2005;45(12):1897–1902. Available from: http://joi.jlc.jst.go.jp/JST.JSTAGE/isijinternational/45.1897?from=CrossRef
- Voskamp AP, Österlund R, Becker PC, et al. Gradual changes in residual stress and microstructure during contact fatigue in ball bearings. Met Technol. 1980 Jan;7(1):14–21. Available from: http://www.tandfonline.com/doi/full/10.1179/030716980803286676
- Šmeļova V, Schwedt A, Wang L, et al. Electron microscopy investigations of microstructural alterations due to classical rolling contact fatigue (RCF) in martensitic AISI 52100 bearing steel. Int J Fatigue. 2017 May;98:142–154. Available from: http://linkinghub.elsevier.com/retrieve/pii/S0142112317300427
- Borgese S. An electron fractographic study of spalls formed in rolling contact. J Basic Engin. 1967 Dec;89(4):943–948. Available from: https://asmedigitalcollection.asme.org/fluidsengineering/article/89/4/943/397915/An-Electron-Fractographic-Study-of-Spalls-Formed
- Kang J. Mechanisms of microstructural damage during rolling contact fatigue of bearing steels [Dissertation]. University of Cambridge; 2014. Available from: https://www.repository.cam.ac.uk/handle/1810/245255.
- Christian JW. Tetragonal martensites in ferrous alloys – a critique. Mater Trans JIM. 1992;33(3):208–214. Available from: https://www.jstage.jst.go.jp/article/matertrans1989/33/3/33_3_208/_article
- Voskamp AP. Material response to rolling contact loading. J Tribol. 1985 Jul;107(3):359–364. Available from: https://asmedigitalcollection.asme.org/tribology/article/107/3/359/437484/Material-Response-to-Rolling-Contact-Loading
- Hahn GT, Bhargava V, Rubin CA, et al. Analysis of the rolling contact residual stresses and cyclic plastic deformation of SAE 52100 steel ball bearings. J Tribol. 1987 Oct;109(4):618–626. Available from: https://asmedigitalcollection.asme.org/tribology/article/109/4/618/433650/Analysis-of-the-Rolling-Contact-Residual-Stresses
- Christian JW. Crystallographic theories, interface structures, and transformation mechanisms. Metall Mater Trans A. 1994 Sep;25(9):1821–1839. Available from: http://link.springer.com/10.1007/BF02649031
- Keh A. Imperfections and plastic deformation of cementite in steel. Acta Metall. 1963 Sep;11(9):1101–1103. Available from: https://linkinghub.elsevier.com/retrieve/pii/0001616063902013
- Nematollahi GA, Grabowski B, Raabe D, et al. Multiscale description of carbon-supersaturated ferrite in severely drawn pearlitic wires. Acta Mater. 2016 Jun;111:321–334. Available from: https://linkinghub.elsevier.com/retrieve/pii/S1359645416302051
- Languillaume J, Kapelski G, Baudelet B. Cementite dissolution in heavily cold drawn pearlitic steel wires. Acta Mater. 1997 Mar;45(3):1201–1212. Available from: https://linkinghub.elsevier.com/retrieve/pii/S1359645496002169
- Hong MH, Reynolds WT, Tarui T, et al. Atom probe and transmission electron microscopy investigations of heavily drawn pearlitic steel wire. Metall Mater Trans A. 1999 Mar;30(13):717–727. Available from: http://link.springer.com/10.1007/s11661-999-1003-y
- McGrath JT, Bratina WJ. Dislocation structures in fatigued iron-carbon alloys. Philos Mag. 1965 Dec;12(120):1293–1305. Available from: http://www.tandfonline.com/doi/abs/10.1080/14786436508228676
- Li Y, Herbig M, Goto S, et al. Atomic scale characterization of white etching area and its adjacent matrix in a martensitic 100Cr6 bearing steel. Mater Charact. 2017 Jan;123:349–353. Available from: http://linkinghub.elsevier.com/retrieve/pii/S1044580316311639 https://linkinghub.elsevier.com/retrieve/pii/S1044580316311639
- Beswick JM. Measurement of carbon levels in structurally transformed sae 52100 ball bearing steel by microprobe analysis. Prakt Metallogr/Pract Metallogr. 1975;12(4):200–206.
- Buchwald J, Heckel RW. An analysis of microstructural changes in 52100 steel bearings during cyclic stressing. ASM Trans Q. 1968;61:750–756.
- Vegter RH, Slycke JT. Metal physics and rolling contact fatigue testing. In: Bearing steel technologies: 9th volume, advances in rolling contact fatigue strength testing and related substitute technologies. West Conshohocken (PA): ASTM International; 2012. p. 341–352. Available from: http://www.astm.org/doiLink.cgi?STP104475.
- Cottrell AH, Bilby BA. Dislocation theory of yielding and strain ageing of iron. Proc Phys Soc Sec A. 1949 Jan;62(1):49–62. Available from: http://stacks.iop.org/0370-1298/62/i=1/a=308?key=crossref.3c9382522ff3c88cc74532c2a4ee6cba
- Kang JH, Hosseinkhani B, Rivera-Díaz-del Castillo PEJ. Rolling contact fatigue in bearings: multiscale overview. Mater Sci Technol. 2012 Jan;28(1):44–49. Available from: http://www.tandfonline.com/doi/full/10.1179/174328413X13758854832157
- Hahn GT, Bhargava V, Chen Q. The cyclic stress-strain properties, hysteresis loop shape, and kinematic hardening of two high-strength bearing steels. Metal Trans A. 1990 Feb;21(2):653–665. Available from: http://link.springer.com/10.1007/BF02671936
- Warhadpande A, Sadeghi F, Evans RD. Microstructural alterations in bearing steels under rolling contact fatigue: part 2–Diffusion-Based modeling approach. Tribol Trans. 2014 Jan;57(1):66–76. Available from: http://www.tandfonline.com/doi/abs/10.1080/10402004.2013.847999
- Shewmon P. Diffusion in solids. Cham: Springer International Publishing; 2016. Available from: http://link.springer.com/10.1007/978-3-319-48206-4.
- Warhadpande A, Sadeghi F, Kotzalas MN, et al. Effects of plasticity on subsurface initiated spalling in rolling contact fatigue. Int J Fatigue. 2012 Mar;36(1):80–95. Available from: http://dx.doi.org/10.1016/j.ijfatigue.2011.08.012 https://linkinghub.elsevier.com/retrieve/pii/S0142112311002222
- Serebrinsky S. A quantum-mechanically informed continuum model of hydrogen embrittlement. J Mech Phys Solids. 2004 Oct;52(10):2403–2430. Available from: https://linkinghub.elsevier.com/retrieve/pii/S0022509604000341
- Dadfarnia M, Martin ML, Nagao A, et al. Modeling hydrogen transport by dislocations. J Mech Phys Solids. 2015 May;78:511–525. Available from: http://dx.doi.org/10.1016/j.jmps.2015.03.002 https://linkinghub.elsevier.com/retrieve/pii/S0022509615000587
- Birnbaum H, Sofronis P. Hydrogen-enhanced localized plasticity – a mechanism for hydrogen-related fracture. Mater Sci Engin A. 1994;176(1–2):191–202.
- Clouet E, Garruchet S, Nguyen H, et al. Dislocation interaction with C in α-Fe: A comparison between atomic simulations and elasticity theory. Acta Mater. 2008 Aug;56(14):3450–3460. Available from: https://linkinghub.elsevier.com/retrieve/pii/S1359645408002218
- Laird C, Buchinger L. Hardening behavior in fatigue. Metal Trans A. 1985 Dec;16(12):2201–2214. Available from: http://link.springer.com/10.1007/BF02670419
- Mughrabi H. Dislocations in fatigue. In: Dislocations and properties of real materials: proceedings of the conference to celebrate the fiftieth anniversary of the concept of dislocation in crystals; London. Institute of Metals; 1985. p. 244–262.
- Neumann P. Low energy dislocation configurations: a possible key to the understanding of fatigue. Mater Sci Engin. 1986 Aug;81(C):465–475. Available from: https://linkinghub.elsevier.com/retrieve/pii/0025541686902843