Effect of solidification rate and Al content on solid solution in Mg–Al–Zn alloy

References

• Zhao S, Meng C, Mao F, et al. Influence of severe plastic deformation on dynamic strain aging of ultrafine grained Al–Mg alloys. Acta Mater. 2014;76:54–67. DOI:10.1016/j.actamat.2014.05.004.
   Web of Science ®Google Scholar
• Agnew SR, Nie JF. Preface to the viewpoint set on: The current state of magnesium alloy science and technology. Scripta Mater. 2010;63:671–673. DOI:10.1016/j.scriptamat.2010.06.029.
   Web of Science ®Google Scholar
• Easton M, Beer A, Barnett M, et al. Magnesium alloy applications in automotive structures. JOM. 2008;60:57–62. DOI: 10.1007/s11837-008-0150-8.
   Web of Science ®Google Scholar
• Wang XJ, Xu DK, Wu RZ, et al. What is going on in magnesium alloys? J Mater Sci Technol. 2018;34:245–247. DOI:10.1016/j.jmst.2017.07.019.
   Web of Science ®Google Scholar
• Nie KB, Wang XJ, Wu K, et al. Development of SiCp/AZ91 magnesium matrix nanocomposites using ultrasonic vibration. Mat Sci Eng A. 2012;540:123–129.
   Web of Science ®Google Scholar
• Homayun B, Afshar A. Microstructure, mechanical properties, corrosion behavior and cytotoxicity of Mg–Zn–Al–Ca alloys as biodegradable materials. J Alloys Compd. 2014;607:1–10. DOI:10.1016/j.jallcom.2014.04.059.
   Web of Science ®Google Scholar
• Wu P, Xu F, Deng K, et al. Effect of extrusion on corrosion properties of Mg-2Ca-χAl (χ = 0, 2, 3, 5) alloys. Corros Sci. 2017;127:280–290. DOI:10.1016/j.corsci.2017.08.014.
   Web of Science ®Google Scholar
• Hu H, Yu A, Li N, et al. Potential magnesium alloys for high temperature die cast automotive applications: a review. Mater Manuf Process. 2003;18:687–717. DOI:10.1081/AMP-120024970.
   Web of Science ®Google Scholar
• Lu X, Zhao G, Zhou J, et al. Microstructure and mechanical properties of Mg-3.0Zn-1.0Sn-0.3Mn-0.3Ca alloy extruded at different temperatures. J Alloys Compd. 2018;732:257–269. DOI:10.1016/j.jallcom.2017.10.210.
   Web of Science ®Google Scholar
• Nimityongskul S, Jones M, Choi H, et al. Grain refining mechanisms in Mg–Al alloys with Al4C3 microparticles. Mat Sci Eng A. 2010;527:2104–2111. DOI:10.1016/j.msea.2009.12.030.
   Web of Science ®Google Scholar
• Huang YD, Kainer KU, Hort N. Mechanism of grain refinement of Mg–Al alloys by SiC inoculation. Scripta Mater. 2011;64:793–796. DOI:10.1016/j.scriptamat.2011.01.005.
   Web of Science ®Google Scholar
• Men H, Fan Z. Effects of solute content on grain refinement in an isothermal melt. Acta Mater. 2011;59:2704–2712. DOI:10.1016/j.actamat.2011.01.
   Web of Science ®Google Scholar
• Jandaghi MR, Pouraliakbar H, Shiran MKG, et al. On the effect of non-isothermal annealing and multi-directional forging on the microstructural evolutions and correlated mechanical and electrical characteristics of hot-deformed Al-Mg alloy. Mat Sci Eng A. 2016;657:431–440. DOI:10.1016/j.msea.2016.01.056.
   Web of Science ®Google Scholar
• Jandaghi MR, Pouraliakbar H, Hong SI, et al. Grain boundary transition associated intergranular failure analysis at TMAZ/SZ interface of dissimilar AA7475-AA2198 joints by friction stir welding. Mater Lett. 2020;280:128557. DOI:10.1016/j.matlet.2020.128557.
   Web of Science ®Google Scholar
• Lu YZ, Wang QD. Effects of rare earths on the microstructure, properties and fracture behavior of Mg–Al alloys. Mat Sci Eng A. 2000;278:66–76. DOI:10.1016/S0921-5093(99)00604-8.
   Web of Science ®Google Scholar
• Tong GD, Liu HF, Liu YH. Effect of rare earth additions on microstructure and mechanical properties of AZ91 magnesium alloy. Trans Non-Ferrous Met Soc China. 2010;20(S2):S336–S340.
   Google Scholar
• Wang Q, Liu YH, Fang SJ. Evaluating the improvement of corrosion residual strength by adding 1.0wt.% yttrium into an AZ91D magnesium alloy. Mater Charact. 2010;61:674–682. DOI:10.1016/j.matchar.2010.03.013.
   Web of Science ®Google Scholar
• Hume-Rothery W, Gilbert WM, Channel-Evans KM. The freezing points, melting points, and solid solubility limits of the alloys of sliver and copper with the elements of the b sub-groups. Phil Trans R Soc Lond. 1934;233:1–97. http://www.jstor.org/stable/91292.
   Google Scholar
• R. L. Smith. Physical chemistry of metals: by Lawrence S. Darken and Robert W, Franklin Institute,1953；573-574.DOI:10.1016/0016-0032(53)90328-7.
   Google Scholar
• Chelikowsky JR. Solid solubilities in divalent alloys. Phys Rev B. 1979;19:686–701. DOI:10.1103/PhysRevB.19.686.
   Web of Science ®Google Scholar
• Alonso JA, Simozar S. Prediction of solid solubility in alloys. Phys Rev B. 1980; 22: 5583–5589. DOI:10.1103/PhysRevB.22.5583
   Web of Science ®Google Scholar
• Ouyang YF, Zhang BW, Liao SZ, et al. A simple analytical EAM model for bcc metals including Cr and its application. Z. Phys. B Condensed Matter. 1996;101:161–168. DOI:10.1007/s002570050195.
   Google Scholar
• Zhang BW, Tan ZS. Prediction of the formation of binary metal-metal amorphous alloys by ion implantation. J Mater Sci Lett. 1988;7:681–682. DOI:10.1007/BF00722065.
   Google Scholar
• Garboggini A, Mcshane HB. Effect of zinc and silicon additions on structure and properties of rapidly solidified Mg–AI alloys. J Mater Sci Technol. 1994;9 :763–770. DOI:10.1179/mst.1994.10.9.763.
   Web of Science ®Google Scholar
• Zhou JX, Yang YS, Tong WH, et al. Effect of cooling rate on the solidified microstructure of Mg-Gd-Y-Zr alloy. Rare Metal Mat Eng. 2010;39:1899–1902. DOI:10.1016/S1875-5372(10)60134-8.
   Web of Science ®Google Scholar
• Song P, Wu GH, Liu WC, et al. Effect of cooling rate on the microstructure and mechanical properties of sand-casting Mg–10Gd–3Y–0.5Zr magnesium alloy. Mat Sci Eng A. 2013;562:152–160. DOI:10.1016/j.msea.2012.11.016.
   Web of Science ®Google Scholar
• Jandaghi MR, Pouraliakbar H, Saboori A, et al. Comparative insight into the interfacial phase evolutions during solution treatment of dissimilar friction stir welded AA2198-AA7475 and AA2198-AA6013 aluminum sheets. Materials (Basel). 2021;14:1290. DOI:10.3390/ma14051290.
   PubMed Web of Science ®Google Scholar
• Straumal BB, Kogtenkova O, Zięba P. Wetting transition of grain-boundary triple junctions. Acta Mater. 2008;56:925–933. DOI:10.1016/j.actamat.2007.10.043.
   Web of Science ®Google Scholar
• Wanger C. Thermodynamics of alloys. MA: Addison Wesley; America, New Jersey, 1952. p. 161–168
   Google Scholar
• Miedema AR, de chattel PR, de Boer FR. Time- and frequency-dependent correlation functions for the homogeneous and alternating-isotropic XY-models. Physica B + C. 1980;100:1–28. DOI:10.1016/0378-4363(80)90054-6.
   Web of Science ®Google Scholar
• Toop GW. Predicting ternary activities using binary data. Trans Metall Soc AIME. 1965;233:850–855.
   Google Scholar
• Kohler R. Zur berechnung der thermodynamischen daten eines terniären systems aus den zugehärigen binären systemen. Monatsh Chem. 1960;91:738–740. DOI:10.1007/BF00899814.
   Google Scholar