References
- Wang BX, Lian JB. Effect of microstructure on low-temperature toughness of a low carbon Nb–V–Ti microalloyed pipeline steel. Mater Sci Eng A. 2014;592:50–56. DOI:https://doi.org/10.1016/j.msea.2013.10.089
- Karmakar A, Biswas S, Mukherjee S, et al. Effect of composition and thermo-mechanical processing schedule on the microstructure, precipitation and strengthening of Nb-microalloyed steel. Mater Sci Eng A. 2017;690:158–169. DOI:https://doi.org/10.1016/j.msea.2017.02.101
- Vervynckt S, Verbeken K, Lopez B, et al. Modern HSLA steels and role of non-recrystallisation temperature. Int Mater Rev. 2012;57(4):187–207. DOI:https://doi.org/10.1179/1743280411Y.0000000013
- Kim J, Jung JG, Kim DH, et al. The kinetics of Nb(C. N) precipitation during the isothermal austenite to ferrite transformation in a low-carbon Nb-microalloyed steel. Acta Mater. 2013;61(19):7437–7443. DOI:https://doi.org/10.1016/j.actamat.2013.08.052
- Glišić D, Radović N, Koprivica A, et al. Influence of reheating temperature and vanadium content on transformation behavior and mechanical properties of medium carbon forging steels. ISIJ Int. 2010;50(4):601–606. DOI:https://doi.org/10.2355/isijinternational.50.601
- Ishikawa F, Takahashi T, Ochi T. Intragranular ferrite nucleation in medium-carbon vanadium steels. Metall Mater Trans A. 1994;25(5):929–936. DOI:https://doi.org/10.1007/BF02652268
- Capdevila C, García-Mateo C, Chao J, et al. Effect of V and N precipitation on acicular ferrite formation in sulfur-lean vanadium steels. Metall Mater Trans A. 2009;40(3):522–538. DOI:https://doi.org/10.1007/s11661-008-9730-z
- Capdevila C, García-Mateo C, Cornide J, et al. Effect of V precipitation on continuously cooled sulfur-lean vanadium-alloyed steels for long products applications. Metall Mater Trans A. 2011;42(12):3743–3751. DOI:https://doi.org/10.1007/s11661-011-0721-0
- Hu J, Du L-X, Wang J-J, et al. Structure–mechanical property relationship in low carbon microalloyed steel plate processed using controlled rolling and two-stage continuous cooling. Mater Sci Eng A. 2013;585:197–204. DOI:https://doi.org/10.1016/j.msea.2013.07.071
- Garcin T, Militzer M, Poole WJ, et al. Microstructure model for the heat-affected zone of X80 linepipe steel. Mater Sci Tech. 2016;32(7):708–721. DOI:https://doi.org/10.1080/02670836.2016.1142705.
- Wang M, Gao X, Zhu C, et al. Microstructure, mechanical properties, and strain-hardening behavior of V–N microalloyed pipeline steels consisted of polygonal ferrite and acicular ferrite. Steel Res Int. 2020;92:2000404. DOI:https://doi.org/10.1002/srin.202000404
- Li X, Ma X, Subramanian SV, et al. Influence of prior austenite grain size on martensite-austenite constituent and toughness in the heat affected zone of 700 MPa high strength linepipe steel. Mater Sci Eng A. 2014;616:141–147. DOI:https://doi.org/10.1016/j.msea.2014.07.100
- Li C, Wang Y, Han T, et al. Microstructure and toughness of coarse grain heat-affected zone of domestic X70 pipeline steel during in-service welding. J Mater Sci. 2011;46(3):727–733. DOI:https://doi.org/10.1007/s10853-010-4803-y
- Li Y, Crowther DN, Green MJW, et al. The effect of vanadium and niobium on the properties and microstructure of the intercritically reheated coarse grained heat affected zone in low carbon microalloyed steels. ISIJ Int. 2001;41(1):46–55. DOI:https://doi.org/10.2355/isijinternational.41.46
- Xie H, Du LX, Hu J, et al. Effect of thermo-mechanical cycling on the microstructure and toughness in the weld CGHAZ of a novel high strength low carbon steel. Mater Sci Eng A. 2015;639:482–488. DOI:https://doi.org/10.1016/j.msea.2015.05.033
- Wang X-N, Zhao Y-J, Guo P-F, et al. Effect of heat input on M-A constituent and toughness of coarse grain heat-affected zone in an X100 pipeline steel. J Mater Eng Perform. 2019;28(3):1810–1821. DOI:https://doi.org/10.1007/s11665-019-03921-7
- Zhou P, Wang B, Wang L, et al. Effect of welding heat input on grain boundary evolution and toughness properties in CGHAZ of X90 pipeline steel. Mater Sci Eng A. 2018;722:112–121. DOI:https://doi.org/10.1016/j.msea.2018.03.029
- Farrar RA, Zhang Z, Bannister SR, et al. The effect of prior austenite grain size on the transformation behaviour of C-Mn-Ni weld metal. J Mater Sci. 1993;28(5):1385–1390. DOI:https://doi.org/10.1007/BF01191982
- Zhao H, Wynne BP, Palmiere EJ. Effect of austenite grain size on the bainitic ferrite morphology and grain refinement of a pipeline steel after continuous cooling. Mater Charact. 2017;123:128–136. DOI:https://doi.org/10.1016/j.matchar.2016.11.025
- Zhu Z, Han J, Li H. Influence of heat input on microstructure and toughness properties in simulated CGHAZ of X80 steel manufactured using high-temperature processing. Metall Mater Trans A. 2015;46(11):5467–5475. DOI:https://doi.org/10.1007/s11661-015-3122-y
- Hu J, Du LX, Wang JJ, et al. Effect of welding heat input on microstructures and toughness in simulated CGHAZ of V-N high strength steel. Mater Sci Eng A. 2013;577:161–168. DOI:https://doi.org/10.1016/j.msea.2013.04.044
- Soliman M, Palkowski H. Influence of hot working parameters on microstructure evolution, tensile behavior and strain aging potential of bainitic pipeline steel. Mater. Des. 2015;88:759–773. DOI:https://doi.org/10.1016/j.matdes.2015.09.040
- Zhao HT, Palmiere EJ. Effect of austenite grain size on acicular ferrite transformation in a HSLA steel. Mater Charact. 2018;145:479–489. DOI:https://doi.org/10.1016/j.matchar.2018.09.013
- Lan L, Shao G. Morphological evolution of HAZ microstructures in low carbon steel during simulated welding thermal cycle. Micron. 2020;131:102828.
- Lan HF, Du LX, Misra RDK. Effect of microstructural constituents on strength-toughness combination in a low carbon bainitic steel. Mater Sci Eng A. 2014;611(9):194–200. DOI:https://doi.org/10.1016/j.msea.2014.05.084
- Bouyne E, Flower HM, Lindley TC, et al. Use of EBSD technique to examine microstructure and cracking in a bainitic steel. Scr Mater. 1998;39(3):295–300. DOI:https://doi.org/10.1016/S1359-6462(98)00170-5
- Tweed JH, Knott JF. Micromechanisms of failure in C-Mn weld metals. Acta Metall. 1987;35(7):1401–1414. DOI:https://doi.org/10.1016/0001-6160(87)90087-3
- Shin SY, Han SY, Hwang B, et al. Effects of Cu and B addition on microstructure and mechanical properties of high-strength bainitic steels. Mater Sci Eng A. 2009;517(1):212–218. DOI:https://doi.org/10.1016/j.msea.2009.03.052
- Sk MB, Alam I, Chakrabarti D. The role of fibrous morphology on the charpy impact properties of low carbon ferrite-bainite dual phase steel. Mater Sci Eng A. 2018;716:208–219. DOI:https://doi.org/10.1016/j.msea.2018.01.041
- Shin SY, Hwang B, Lee S, et al. Correlation of microstructure and charpy impact properties in API X70 and X80 line-pipe steels. Mater Sci Eng A. 2007;458(1):281–289. DOI:https://doi.org/10.1016/j.msea.2006.12.097
- Rasouli D, Khameneh Asl S, Akbarzadeh A, et al. Effect of cooling rate on the microstructure and mechanical properties of microalloyed forging steel. J Mater Proc Tech. 2008;206(1):92–98. DOI:https://doi.org/10.1016/j.jmatprotec.2007.12.006
- Wang H-b, Wang F-l, Shi G-h, et al. Effect of welding heat input on microstructure and impact toughness in CGHAZ of X100Q steel. J Iron Steel Res Int. 2019;26(6):637–646. DOI:https://doi.org/10.1007/s42243-019-00271-5
- Kong X, Qiu C. Continuous cooling bainite transformation characteristics of a low carbon microalloyed steel under the simulated welding thermal cycle process. Mater Sci Technol. 2013;29(5):446–450. DOI:https://doi.org/10.1016/j.jmst.2013.03.022
- Baker TN. Processes, microstructure and properties of vanadium microalloyed steels. Mater Sci Tech. 2009;25(9):1083–1107. DOI:https://doi.org/10.1179/174328409x453253
- Zhang J, Xin W, Luo G, et al. Effect of welding heat input on microstructural evolution, precipitation behavior and resultant properties of the simulated CGHAZ in high-N V-alloyed steel. Mater Charact. 2020;162:110201). DOI:https://doi.org/10.1016/j.matchar.2020.110201
- Al Hajeri KF, Garcia CI, Hua M, et al. Particle-stimulated nucleation of ferrite in heavy steel sections. ISIJ Int. 2006;46(8):1233–1240. DOI:https://doi.org/10.2355/isijinternational.46.1233
- Zhou X-G, Zeng C-Y, Yang H, et al. Effect of cooling process on microstructure and mechanical properties of X100 pipeline steel. Steel Res Int. 2016;87(10):1366–1375. DOI:https://doi.org/10.1002/srin.201500411
- Biss V, Cryderman RL. Martensite and retained austenite in hot-rolled, low-carbon bainitic steels. Metall Trans. 1971;2(8):2267–2276. DOI:https://doi.org/10.1007/BF02917559
- Lan L, Qiu C, Zhao D, et al. Microstructural characteristics and toughness of the simulated coarse grained heat affected zone of high strength low carbon bainitic steel. Mater Sci Eng A. 2011;529:192–200. DOI:https://doi.org/10.1016/j.msea.2011.09.017
- Xie GM, Duan RH, Xue P, et al. Microstructure and mechanical properties of X80 pipeline steel joints by friction stir welding under various cooling conditions. Acta Metall Sin Engl Lett. 2020;33(1):88–102. DOI:https://doi.org/10.1007/s40195-019-00940-0
- Curry DA, Knott JF. Effects of microstructure on cleavage fracture stress in steel. Metal Sci. 1978;12(11):511–514. DOI:https://doi.org/10.1179/msc.1978.12.11.511
- Guo B, Fan L, Wang Q, et al. The role of the bainitic packet in control of impact toughness in a simulated CGHAZ of X90 pipeline steel. Metals (Basel). 2016;6(11):256. DOI:https://doi.org/10.3390/met6110256
- Cui B, Peng Y, Zhao L, et al. Effect of heat input on microstructure and toughness of coarse grained heat affected zone of Q890 steel. ISIJ Int. 2016;56(1):132–139. DOI:https://doi.org/10.2355/isijinternational.ISIJINT-2015-378
- Zhong Y, Xiao F, Zhang J, et al. In situ TEM study of the effect of M/A films at grain boundaries on crack propagation in an ultra-fine acicular ferrite pipeline steel. Acta Mater. 2006;54(2):435–443. DOI:https://doi.org/10.1016/j.actamat.2005.09.015