Microstructure and mechanical properties of W-10 wt-%Ta alloys prepared by spark plasma sintering

References

• Chen C-L, Ma S-H. Study on characteristics and sintering behavior of W-Ni-Co tungsten heavy alloy by a secondary ball milling method. J Alloys Compd. 2018;731:78–83.
   Web of Science ®Google Scholar
• Chen L, Wang Q, Xiong L, et al. Computationally predicted fundamental behaviors of embedded hydrogen at TiC/W interfaces. Int J Hydrogen Energy. 2018;43(33):16180–16186.
   Web of Science ®Google Scholar
• Ding L, Xiang DP, Pan YL, et al. Mechanical properties and microstructural evolution of Mo–Co-co-strengthened W–Ni–Fe alloys by spark plasma sintering. J Alloys Compd. 2017;712:593–598.
   Web of Science ®Google Scholar
• Hu Y-J, Shang S-L, Wang Y, et al. Effects of alloying elements and temperature on the elastic properties of W-based alloys by first-principles calculations. J Alloys Compd. 2016;671:267–275.
   Web of Science ®Google Scholar
• Németh AAN, Reiser J, Armstrong DEJ, et al. The nature of the brittle-to-ductile transition of ultra fine grained tungsten (W) foil. Int J Refract Met Hard Mater. 2015;50:9–15.
   Web of Science ®Google Scholar
• Butler BG, Paramore JD, Ligda JP, et al. Mechanisms of deformation and ductility in tungsten–A review. Int J Refract Met Hard Mater. 2018;75:248–261.
   Web of Science ®Google Scholar
• Oude Vrielink MA, Van Dommelen JAW, Geers MGD. Numerical investigation of the brittle-to-ductile transition temperature of rolled high-purity tungsten. Mech Mater. 2020;145:103394.
   Web of Science ®Google Scholar
• Ren C, Fang ZZ, Koopman M, et al. Methods for improving ductility of tungsten-A review. Int J Refract Met Hard Mater. 2018;75:170–183.
   Web of Science ®Google Scholar
• Harrison RW, Greaves G, Hinks JA, et al. Intermetallic Re phases formed in ion irradiated WRe alloy. J Nucl Mater. 2019;514:123–127.
   Web of Science ®Google Scholar
• Jiang D, Xiao W, Liu D, et al. Structural stability, electronic structures, mechanical properties and debye temperature of W-Re alloys: A first-principles study. Fusion Eng Des. 2021;162:112081.
   Web of Science ®Google Scholar
• Muzyk M, Nguyen-Manh D, Wróbel J, et al. First-principles model for phase stability, radiation defects and elastic properties of W–Ta and W–V alloys. J Nucl Mater. 2013;442(1-3):S680–S683.
   Web of Science ®Google Scholar
• Lv Y, Hu K, Huang Z, et al. Effect of tungsten on the vacancy behaviors in Ta–W alloys from first-principles calculations. Solid State Commun. 2020;306:113767.
   Web of Science ®Google Scholar
• Luo L-M, Chen J-B, Lin J-S, et al. Influence of Nb content on the microstructure and deuterium retention of W–Nb alloys. Fusion Eng Des. 2018;129:120–129.
   Web of Science ®Google Scholar
• Chen H-Y, Zhou Y-F, Xu M-Y, et al. The influence of different isochronal annealing temperature on helium ion irradiation damage of W-Nb composites. Fusion Eng Des. 2020;159:111857.
   Web of Science ®Google Scholar
• Xu A, Beck C, Armstrong DEJ, et al. Ion-irradiation-induced clustering in W–Re and W–Re–Os alloys: A comparative study using atom probe tomography and nanoindentation measurements. Acta Mater. 2015;87:121–127.
   Web of Science ®Google Scholar
• Setyawan W, Nandipati G, Kurtz RJ. Ab initio study of interstitial cluster interaction with Re, Os, and Ta in W. J Nucl Mater. 2017;484:30–41.
   Web of Science ®Google Scholar
• Chen C, Qian S, Wang S, et al. The microstructure and property of W/Ti multilayer composites prepared by spark plasma sintering. Int J Refract Met Hard Mater. 2019;79:138–144.
   Web of Science ®Google Scholar
• Cui Z, Zhang X, Liu Q, et al. A first-principles study of the mechanical and thermodynamic properties of WTi, WV, W2Zr, WVTi, WVZr alloys. Fusion Eng Des. 2020;152:111451.
   Web of Science ®Google Scholar
• Li Y-H, Zhou H-B, Liang L, et al. Transition from ductilizing to hardening in tungsten: The dependence on rhenium distribution. Acta Mater. 2019;181:110–123.
   Web of Science ®Google Scholar
• Pramanik S, Srivastav AK, Jolly BM, et al. Effect of Re on microstructural evolution and densification kinetics during spark plasma sintering of nanocrystalline W. Adv Powder Technol. 2019;30(11):2779–2786.
   Web of Science ®Google Scholar
• Wen S, Hu K, Pan M, et al. Effect of transmutation elements Re and Ta on the vacancy formation and dissociation behaviors in W bulk. Comput Mater Sci. 2020;179:109624.
   Web of Science ®Google Scholar
• Shen L, Tesfaye F, Li X, et al. Review of rhenium extraction and recycling technologies from primary and secondary resources. Miner Eng. 2021;161:106719.
   Web of Science ®Google Scholar
• Xiong Y, Song Y, Tong Q, et al. Adsorption-controlled preparation of anionic imprinted amino-functionalization chitosan for recognizing rhenium (VII). Sep Purif Technol. 2017;177:142–151.
   Web of Science ®Google Scholar
• Lied P, Bonnekoh C, Pantleon W, et al. Comparison of K-doped and pure cold-rolled tungsten sheets: As-rolled condition and recrystallization behaviour after isochronal annealing at different temperatures. Int J Refract Met Hard Mater. 2019;85:105047.
   Web of Science ®Google Scholar
• Nogami S, Hasegawa A, Fukuda M, et al. Tungsten modified by potassium doping and rhenium addition for fusion reactor applications. Fusion Eng Des. 2020;152:111445.
   Web of Science ®Google Scholar
• Li Y, Zhang J, Luo G, et al. Low-temperature densification and microstructure of W–Cu composites with Sn additives. J Mater Res Technol. 2021;10:121–131.
   Google Scholar
• Kalyan Kamal S S, Sushma Y, Vimala J, et al. Effect of processing route on densification of W-10wt%Cu nanocomposite using spark plasma sintering. J Alloys Compd. 2019, 785:1137-1143.
   Web of Science ®Google Scholar
• Niu Y, Chen M, Wang J, et al. Preparation and thermal shock performance of thick α-Ta coatings by direct current magnetron sputtering (DCMS). Surf Coat Technol. 2017;321:19–25.
   Web of Science ®Google Scholar
• Wang S, Wu ZH, Xie MY, et al. The effect of tungsten content on the rolling texture and microstructure of Ta-W alloys. Mater Charact. 2020;159:110067.
   Web of Science ®Google Scholar
• Turchi PEA, Gonis A, Drchal V, et al. First-principles study of stability and local order in substitutional Ta-W alloys. Phys Rev B. 2001;64(8):085112.
   Web of Science ®Google Scholar
• You Y-W, Yu J, Yuan H, et al. Retention of hydrogen in W-Ti-C, W-Ta-C and W-Zr-C alloys: ab initio study. Phys Scr. 2020;95(10):105707.
   Web of Science ®Google Scholar
• Dai W, Liang S, Luo Y, et al. Effect of W powders characteristics on the Ti-rich phase and properties of W-10wt.%Ti alloy. Int J Refract Met Hard Mater. 2015;50:240–246.
   Web of Science ®Google Scholar
• Xu A, Armstrong DEJ, Beck C, et al. Ion-irradiation induced clustering in W-Re-Ta, W-Re and W-Ta alloys: An atom probe tomography and nanoindentation study. Acta Mater. 2017;124:71–78.
   Web of Science ®Google Scholar
• Li K, Ma G, Xing L, et al. Crack suppression via in-situ oxidation in additively manufactured W-Ta alloy. Mater Lett. 2020;263:127212.
   Web of Science ®Google Scholar
• Srivastav AK, Chawake N, Yadav D, et al. Localized pore evolution assisted densification during spark plasma sintering of nanocrystalline W-5wt.%Mo alloy. Scr Mater. 2019;159:41–45.
   Web of Science ®Google Scholar
• Srivastav AK, Bandi S, Kumar A, et al. Microstructure evolution and densification during spark plasma sintering of nanocrystalline W-5wt.%Ta alloy. Philos Mag Lett. 2020;100(9):442–451.
   Web of Science ®Google Scholar
• Chen C, Xu J, Liu R, et al. The effect of sintering temperature on the tensile properties and fracture behaviors of W/Ta multilayer composites. Mater Sci Eng A. 2019;768:138450.
   Web of Science ®Google Scholar
• Ding X-Y, Luo L-M, Chen H-Y, et al. Fabrication of W─1wt.%TiC composites by spark plasma sintering. Fusion Eng Des. 2015;92:29–34.
   Web of Science ®Google Scholar
• Beake BD, Harris AJ, Moghal J, et al. Temperature dependence of strain rate sensitivity, indentation size effects and pile-up in polycrystalline tungsten from 25 to 950 °C. Mater Des. 2018;156:278–286.
   Web of Science ®Google Scholar
• Caillard D. A TEM in situ study of the softening of tungsten by rhenium. Acta Mater. 2020;194:249–256.
   Web of Science ®Google Scholar
• Issariyapat A, Visuttipitukul P, Umeda J, et al. Refined grain formation behavior and strengthening mechanism of α-titanium with nitrogen fabricated by selective laser melting. Addit Manuf. 2020;36:101537.
   Web of Science ®Google Scholar
• Bhansali K, Keche AJ, Gogte CL, et al. Effect of grain size on Hall-Petch relationship during rolling process of reinforcement bar. Materi Today: Proc. 2020;26:3173–3178.
   Google Scholar
• Chen S, Tseng K-K, Tong Y, et al. Grain growth and Hall-Petch relationship in a refractory HfNbTaZrTi high-entropy alloy. J Alloys Compd. 2019;795:19–26.
   Web of Science ®Google Scholar