References
- Tsuru T, Hashimoto K, Haruyama S. Critical issues in reducing the corrosion of steels. Houston (TX): NACE; 1986. p. 110–120.
- Newman RC. 2001 WR Whitney Award Lecture: understanding the corrosion of stainless steel. Corrosion. 2001;57:1030–1041.
- Tsai W-T, Reynders B, Stratmann M, et al. The effect of applied potential on the stress corrosion cracking behavior of high nitrogen steels. Corros Sci. 1993;34:1647–1656. [cited 2020 Mar 9] Available from: https://www.sciencedirect.com/science/article/pii/0010938X9390038I?via%3Dihub.
- Mozhi TA, Clark WAT, Wilde BE. The effect of nitrogen and carbon on the stress corrosion cracking performance of sensitized AISI 304 stainless steel in chloride and sulfate solutions at 250°C. Corros Sci. 1987;27:257–273. [cited 2020 Mar 9] Available from: https://www.sciencedirect.com/science/article/pii/0010938X87900229.
- Vehovar L, Vehovar A, Metikoš-Huković M, et al. Investigations into the stress corrosion cracking of stainless steel alloyed with nitrogen. Mater Corros. 2002;53:316–327. doi:https://doi.org/10.1002/1521-4176(200205)53:5%3C316::AID-MACO316%3E3.0.CO.
- Kain V. Stress corrosion cracking (SCC) in stainless steels [internet]. In: Stress Corros. Crack. Theory Pract. Woodhead Publishing Limited; 2011. doi:https://doi.org/10.1533/9780857093769.3.199.
- William MS, Jyotirmoy M. Laser material processing [internet]. 4th ed. Springer; 2010. Available from: http://medcontent.metapress.com/index/A65RM03P4874243N.pdf.
- Lee H, Lim CHJ, Low MJ, et al. Lasers in additive manufacturing: a review. Int J Precis Eng Manuf Technol. 2017;4:307–322.doi:https://doi.org/10.1007/s40684-017-0037-7.
- Brandt M. The role of lasers in additive manufacturing [internet]. Laser Addit. Manuf. Mater. Des. Technol. Appl. Elsevier Ltd. 2017.doi:https://doi.org/10.1016/B978-0-08-100433-3.02001-7.
- Katayama S, Kawahito Y, Mizutani M. Elucidation of laser welding phenomena and factors affecting weld penetration and welding defects. Phys Procedia. 2010;5:9–17. Available from: https://www.sciencedirect.com/science/article/pii/S1875389210004505.
- Shaikh H, Anita T, Dayal RK, et al. Effect of metallurgical variables on the stress corrosion crack growth behaviour of AISI type 316LN stainless steel. Corros Sci. 2010;52:1146–1154. [cited 2019 Aug 21] Available from: https://www.sciencedirect.com/science/article/pii/S0010938X09006465.
- Ghosh S, Rana VPS, Kain V, et al. Role of residual stresses induced by industrial fabrication on stress corrosion cracking susceptibility of austenitic stainless steel. Mater Des. 2011;32:3823–3831. doi:https://doi.org/10.1016/j.matdes.2011.03.012.
- Tawancy HM, Al-Hadhrami LM. Case study: pitting and stress corrosion cracking in heat-affected zone of welded underground 304 stainless steel pipe. J Mater Eng Perform. 2012;21:1757–1762.
- Rahimi S, Mehrez K, Marrow TJ. Effect of surface machining on intergranular stress corrosion cracking (IGSCC) in sensitised type 304 austenitic stainless steel. Corros Eng Sci Technol. 2016;51:383–391.
- Yan S, Shi Y, Liu J, et al. Effect of laser mode on microstructure and corrosion resistance of 316L stainless steel weld joint. Opt Laser Technol. 2019;113:428–436. [cited 2019 Dec 2] Available from: https://www.sciencedirect.com/science/article/pii/S0030399218314269.
- Wang J, Su H, Chen K, et al. Effect of δ-ferrite on the stress corrosion cracking behavior of 321 stainless steel. Corros Sci. 2019;158:108079.
- Nanavati PK, Kotecki DJ, Soman SN. Effect of weld metal ferrite content on mechanical properties and stress corrosion cracking resistance in 22 Cr 5 Ni duplex stainless steel. Weld World. 2019;63:793–805.
- Fu ZH, Li T, Shan ML, et al. Hydrogen atoms on the SCC behavior of SUS301L-MT stainless steel laser-arc hybrid welded joints. Corros Sci. 2019;148:272–280.
- Pallavi P, Verma J, Taiwade R, et al. Influence of advanced laser-arc hybrid welding and conventional MIG process on microstructure, mechanical properties and corrosion resistance of dissimilar joints. Mater Res Express. 2018;5(6):066558.
- Kang K, Kawahito Y, Gao M, et al. Effects of laser-arc distance on corrosion behavior of single-pass hybrid welded stainless clad steel plate. Mater Des. 2017;123:80–88. [cited 2019 Dec 2] Available from: https://www.sciencedirect.com/science/article/pii/S0264127517302988.
- Tandler M, Vehovar L, Doleček V, et al. Prediction of the remaining lifetime of stainless steels under conditions of stress corrosion cracking. Mater Corros. 2003;54:595–600.
- Leinonen H. Stress corrosion cracking and life prediction of austenitic stainless steels in calcium chloride solution. Corrosion. 1995;52:337–346.
- Toppo A, Pujar MG, Sreevidya N, et al. Pitting and stress corrosion cracking studies on AISI type 316N stainless steel weldments. Def Technol. 2018;14:226–237. [cited 2019 Aug 21] Available from: https://www.sciencedirect.com/science/article/pii/S2214914717302428.
- Ragavendran M, Vasudevan M. Laser and hybrid laser welding of type 316L(N) austenitic stainless steel plates. Mater Manuf Process. 2020: 1–13. [cited 2020 Apr 27] Available from: https://www.tandfonline.com/doi/full/https://doi.org/10.1080/10426914.2020.1745231.
- Wegrzyn T. Delta ferrite in stainless steel weld metals. Weld Int. 1992;6:690–694.
- Alwin B, Lakshminarayanan AK, Vasudevan M, et al. Assessment of stress corrosion cracking resistance of activated Tungsten Inert Gas-welded duplex stainless steel joints. J Mater Eng Perform. 2017;26:5825–5836.
- Raja KS, Rao KP. Effect of applied potentials on room temperature stress corrosion cracking of austenitic stainless steel weldments. Corrosion. 1992;48:634–640. doi:https://doi.org/10.5006/1.3315983.
- Shaikh H, Khatak HS, Gnanamoorthy JB. Stress corrosion cracking of weldments of AISI type 316 stainless steel. Mater Corros. 1987;38:183–187.
- Koseki T, Matsumiya T, Yamada W, et al. Numerical modeling of solidification and subsequent transformation of Fe-Cr-Ni alloys. Metall Mater Trans A. 1994;25:1309–1321. doi:https://doi.org/10.1007/BF02652305.
- Mukai Y, Watanabe M, Murata M. Fractographic observation of stress-corrosion cracking of AISI 304 stainless steel in boiling 42 percent magnesium-chloride solution. In: Strauss BM, Cullen WH, editors. Fractography Fail Anal [internet]. West Conshohocken, PA: ASTM International; 1978. p. 164–175. Available from: https://www.astm.org/DIGITAL_LIBRARY/STP/PAGES/STP38091S.htm.
- Meletis EI, Hochman RF. The crystallography of stress corrosion cracking in face centered cubic single crystals. Corros Sci. 1984;24:843–862. Available from: https://www.sciencedirect.com/science/article/pii/0010938X84901239.
- Krishnan KN, Rao KP. Effect of ferrite content and weld heat input on the room temperature stress corrosion cracking resistance of austenitic clad metals. Mater Corros. 1990;41:178–184.