Nickel Aluminide intermetallic composites fabricated by various processing routes – a review

References

• Lee Y-J, Lee BY, Yoon CW, et al. Facile synthesis of micro-sized Ni–Al alloy powders through low-temperature chemical alloying. J Alloys Compd. 2020;815:152392.
   Web of Science ®Google Scholar
• Wu DL, Dahl KV, Christiansen TL, et al. Corrosion behaviour of Ni and nickel aluminide coatings exposed in a biomass fired power plant for two years. Surf Coat Technol. 2019;362:355–365.
   Web of Science ®Google Scholar
• Dey GK. Physical metallurgy of nickel aluminides. Sadhana. 2003;28:247–262.
   Web of Science ®Google Scholar
• Darolia R. NiAl alloys for high-temperature structural applications. JOM. 1991;43:44–49.
   Web of Science ®Google Scholar
• Talaş Ş. Nickel aluminides. UK: Elsevier; 2018.
   Google Scholar
• Baker I, Munroe PR. Improving intermetallic ductility and toughness. JOM. 1988;40(2):28–31.
   Web of Science ®Google Scholar
• Shang Z, Shen J, Wang L, et al. Investigations on the microstructure and room temperature fracture toughness of directionally solidified NiAl–Cr(Mo) eutectic alloy. Intermetallics. 2015;57:25–33.
   Web of Science ®Google Scholar
• Ponomareva AV, Vekilov YK, Abrikosov I. Effect of Re content on elastic properties of B2 NiAl from ab initio calculations. J Alloys Compd. 2014;586:s274–s278.
   Web of Science ®Google Scholar
• Bochenek K, Basista M. Advances in processing of NiAl intermetallic alloys and composites for high temperature aerospace applications. Prog Aerosp Sci. 2015;79:136–146.
   Web of Science ®Google Scholar
• Ameri S, Sadeghian Z, Kazeminezhad I. Effect of CNT addition approach on the microstructure and properties of NiAl-CNT nanocomposites produced by mechanical alloying and spark plasma sintering. Intermetallics. 2016;76:41–48.
   Web of Science ®Google Scholar
• Olanipekun AT, Maledi NB, Madindwa P. The synergy between powder metallurgy processes and welding of metallic alloy: a review. Powder Metall. 2020;63(4):254–267.
   Web of Science ®Google Scholar
• Shuai C, He C, Peng S, et al. Mechanical alloying of immiscible metallic systems: process, microstructure, and mechanism. Adv Eng Mater. 2021;23(4):1–15.
   Web of Science ®Google Scholar
• Jungling T, Oberacker R, Thummler F, et al. Milling of TiB2 and TiB2-Fe alloys: a comparison between planetary ball milling and attrition milling. J Hard Mater. 1991;2:3–4.
   Google Scholar
• Zolriasatein A, Shokuhfar A, Safari F, et al. Comparative study of SPEX and planetary milling methods for the fabrication of complex metallic alloy nanoparticles. Micro Nano Lett. 2018;13:448–451.
   Web of Science ®Google Scholar
• Mashreghi A, Moshksar MM. Partial martensitic transformation of nanocrystalline NiAl intermetallic during mechanical alloying. J Alloys Compd. 2009;482:196–198.
   Web of Science ®Google Scholar
• Kubaski ET, Cintho OM, Capocchi JDT. Effect of milling variables on the synthesis of NiAl intermetallic compound by mechanical alloying. Powder Technol. 2011;214:77–82.
   Web of Science ®Google Scholar
• Zelaya E, Esquivel MR, Schryvers D. Evolution of the phase stability of Ni–Al under low energy ball milling. Adv Powder Technol. 2013;24:1063–1069.
   Web of Science ®Google Scholar
• Mohammed KS, Naeem HT, Nadira S. Study of the feasibility of producing Al – Ni intermetallic compounds by mechanical alloying 1. Phys od Met Metallogr. 2016;117:95–804.
   Web of Science ®Google Scholar
• Xu GH, Zhang KF, Huang ZQ. The synthesis and characterization of ultrafine grain NiAl intermetallic. Adv Powder Technol. 2012;23:366–371.
   Web of Science ®Google Scholar
• Takahashi T, Dunand DC, Al Nial N. Nickel aluminide containing refractory-metal dispersoids: 1 : synthesis by reactive mechanical alloying. Mater Sci Eng A. 1995;192–193:186–194.
   Web of Science ®Google Scholar
• Kubaski ET, Cintho OM, Antoniassi JL, et al. Obtaining NiAl intermetallic compound using different milling devices. Adv Powder Technol. 2012;23:667–672.
   Web of Science ®Google Scholar
• Torralba JM. Improvement of mechanical and physical properties in powder metallurgy. UK: Elsevier; 2014.
   Google Scholar
• Albiter A, Salazar M, Bedolla E, et al. Improvement of the mechanical properties in a nanocrystalline NiAl intermetallic alloy with Fe, Ga and Mo additions. Mater Sci Eng A. 2003;347:154–164.
   Web of Science ®Google Scholar
• Liu E, Jia J, Bai Y, et al. Study on preparation and mechanical property of nanocrystalline NiAl intermetallic. Mater Des. 2014;53:596–601.
   Web of Science ®Google Scholar
• Bagher M, Jia D, et al. Processing behavior of nanocrystalline NiAl during milling, sintering and mechanical loading and interpretation of its intergranular fracture,. Eng Fract Mech. 2014;132:136–146.
   Web of Science ®Google Scholar
• Azarmi F. Creep properties of nickel aluminide composite materials reinforced with SiC particulates. Compos Part B. 2011;42(7):1779–1785.
   Web of Science ®Google Scholar
• Liu E, Gao Y, Jia J, et al. Microstructure and mechanical properties of in situ NiAl-Mo2C nanocomposites prepared by hot-pressing sintering. Mater Sci Eng A. 2014;592:201–206.
   Web of Science ®Google Scholar
• Krasnowski M, Gierlotka S, Kulik T, et al. Nanocrystalline Al3Ni2 alloy with high hardness produced by mechanical alloying and high-pressure hot-pressing consolidation. Intermetallics. 2013;42:35–40.
   Web of Science ®Google Scholar
• Krasnowski M, Gierlotka S, Kulik T, et al. Intermetallics nanocrystalline matrix Al3Ni2-Al-Al3Ni composites produced by reactive hot-pressing of milled powders,. Intermetallics. 2014;54:193–198.
   Web of Science ®Google Scholar
• Takahashi T, Dunandb DC, et al. Nickel aluminide containing refractory-metal dispersoids 2 : microstructure and properties. Mater Sci Eng A. 2017;192:195–203.
   Google Scholar
• Bochenek K, Węglewski W, Morgiel J, et al. Influence of rhenium addition on microstructure, mechanical properties and oxidation resistance of NiAl obtained by powder metallurgy. Mater Sci Eng A. 2018;735:121–130.
   Web of Science ®Google Scholar
• Zhou LZ, Guo JT. Grain growth and kinetics for nanocrystalline NiAl. Scr Mater. 1998;40:139–144.
   Web of Science ®Google Scholar
• Wright RN, Rabin BH, Knibloe JR, et al. Consolidation of Ni3Ai powders by hot isostatic pressing. Mater Manuf Process. 1989;4(1):25–37.
   Google Scholar
• Ning H, Wang D, Wang B, et al. Investigations on the NiAl – Cr (Mo) eutectic alloy with optimized microstructure and improved room-temperature compressive properties. Mater Sci Eng A. 2021;813:141138.
   Web of Science ®Google Scholar
• Wang D, Ning H, Wang B, et al. Fabrication of a NiAl – Cr (Mo) eutectic alloy with network microstructure for high-temperature strengthening. Mater Sci Eng A. 2022;835:142628.
   Web of Science ®Google Scholar
• Cui CY, Guo JT, Ye HQ, et al. Effects of Hf additions on high-temperature mechanical properties of a directionally solidified NiAl/Cr(Mo) eutectic alloy. J. Alloys Compd. 2008;463:263–270.
   Web of Science ®Google Scholar
• Cui CY, Guo JT, Qi YH, et al. Deformation behavior and microstructure of DS NiAl / Cr (Mo) alloy containing Hf. Intermetallics. 2002;10:1001–1009.
   Web of Science ®Google Scholar
• Cui CY, Chen YX, Guo JT, et al. Preliminary investigation of directionally solidified NiAl–28Cr–5.5Mo–0 .5Hf composite. Mat Letters. 2000;43:303–308.
   Web of Science ®Google Scholar
• Johnson DR, Chen XF, Oliver BF, et al. Processing and mechanical properties of in-situ composites from the NiAl-Cr and the NiAl-(Cr,Mo) eutectic systems. Intermetallics. 1995;3:99–113.
   Web of Science ®Google Scholar
• Sheng L, Zhang W, Guo J, et al. Intermetallics effect of Au addition on the microstructure and mechanical properties of NiAl intermetallic compound. Intermetallics. 2010;18:740–744.
   Web of Science ®Google Scholar
• Webber JG, Van Aken DC, et al. Studies of a quasi-binary β-NiAl and α-Re eutectic. Scr Metall. 1989;23:193–196.
   Google Scholar
• Guo JT, Cui CY, Chen YX, et al. Microstructure, interface and mechanical property of the DS NiAl/Cr (Mo, Hf) composite. Intermetallics. 2001;9:287–297.
   Web of Science ®Google Scholar
• Guo JT, Huai KW, Gao Q, et al. Effects of rare earth elements on the microstructure and mechanical properties of NiAl-based eutectic alloy. Intermetallics. 2007;5:727–733.
   Web of Science ®Google Scholar
• Wang L, Shen J, Zhang Y, et al. Intermetallics microstructure evolution and room temperature fracture toughness of as-cast and directionally solidified novel NiAl-Cr(Fe) alloy. Intermetallics. 2017;84:11–19.
   Web of Science ®Google Scholar
• Milenkovic S, Monge MA, et al. Mechanical alloying and field assisted hot pressing of nanocrystalline B2-NiAl intermetallic compound. Powder Metall. 2014;57:212–219.
   Web of Science ®Google Scholar
• Shekari M, Adeli M, Khobzi A, et al. Induction-activated self-propagating, high-temperature synthesis of Nickel aluminide. Adv Powder Technol. 2017;28:2974–2979.
   Web of Science ®Google Scholar
• Biffi CA, Bassani P, Sajedi Z, et al. Laser ignition in self-propagating high temperature synthesis of porous NiTinol shape memory alloy. Mater Lett. 2017;193:54–57.
   Web of Science ®Google Scholar
• Rosa R, Veronesi P, Casagrande A, et al. Microwave ignition of the combustion synthesis of aluminides and field-related effects. J Alloys Compd. 2016;657:59–67.
   Web of Science ®Google Scholar
• Adegbenjo AO, Olubambi A, et al. Nial intermetallic composites – a review of processing methods, reinforcements and mechanical properties. Int J Adv Manuf. 2019;104:1733–1747.
   Web of Science ®Google Scholar
• Dey GK, Sekhar JA, et al. Micropyretic synthesis of tough NiAl alloys. Metall Mater Trans B. 1997;28:905–918.
   Web of Science ®Google Scholar
• Gostishchev VV, Astapov IA, Khimukhin SN, et al. Fabrication of nickel – aluminum alloys with tungsten and molybdenum borides by the method of self-propagating high-temperature synthesis. Inorgan Mater: Appl Res. 2017;8:546–550.
   Google Scholar
• Akbar A, Parvin N, Shokati M, et al. Combustion synthesis of NiAl matrix composite powder reinforced by TiB2 and TiN particulates from Ni–Al–Ti–BN reaction system,. J. Alloys Compd. 2014;585:637–643.
   Web of Science ®Google Scholar
• Awotunde M, Adegbenjo A, Ayodele O, et al. Materials today : proceedings Effects of carbon nanotube weight fraction on the fracture toughness of spark plasma sintered nickel aluminide-NiAl3. Mater Today Proc. 2020;28:10–14.
   Google Scholar
• Coreno-Alonso O, Cabanas-Morenoz JG, Cruz-Rivera JJ, et al. Characterization of NiAl intermetallic produced by mechanical alloying and consolidated by spark plasma sintering. Mater Sci Forum. 2000;343-346:635–640.
   Google Scholar
• Xi X, Lin P, Meng L, et al. The microstructure and mechanical properties of reaction synthesized Ni-Al intermetallic sheets by pure Ni/Al foils with different thickness ratios,. J Alloys Compd. 2022;902:163750.
   Web of Science ®Google Scholar
• Sun Y, Lin P, Yuan SJ, et al. A novel method for fabricating NiAl alloy sheet components using laminated Ni/Al foils. Mater Sci Eng A. 2019;754:428–436.
   Web of Science ®Google Scholar
• Kim HY, Chung DS, Hong SH, et al. Reaction synthesis and microstructures of NiAl/Ni micro-laminated composites. Mater Sci Eng A. 2005;396:376–384.
   Web of Science ®Google Scholar
• Wang QW, Fan GH, Geng L, et al. A novel fabrication route to microlaminated TiB2- NiAl composite sheet with{ 111 } <µvw > texture by roll bonding and annealing treatment. Intermetallics. 2013;37:46–51.
   Web of Science ®Google Scholar
• Fan G, Wang Q, Geng LIN, et al. Fabrication, microstructure, and mechanical property of NiAl-based composite with microlaminated architecture by roll bonding and annealing treatment. Metall Mater Trans A. 2016;47:1280–1291.
   Web of Science ®Google Scholar
• Du YAN, Fan G, Wang Q, et al. Synthesis mechanism and strengthening effects of laminated NiAl by reaction annealing. Metall Mater Trans A. 2016;368:1–10.
   Google Scholar
• Azhagarsamy P, Sekar K, Murali KP, et al. An overview of metallic materials fabrication by direct energy deposition. Key Eng Mater. 2021;882:11–20.
   Google Scholar
• Debroy T, Mukherjee T, Wei HL, et al. Metallurgy, mechanistic models and machine learning in metal printing. Nat Rev Mater. 2021;6:48–68.
   Web of Science ®Google Scholar
• Yu Y, Zaitsev AA, Levashov EA, et al. NiAl based alloy produced by HIP and SLM of pre-alloyed spherical powders. Evolution of the structure and mechanical behavior at high temperatures. Mater Sci Eng A. 2018;717:48–59.
   Web of Science ®Google Scholar
• Yu Y, Levashov EA, Korotitskiy AV, et al. Influence of aging and HIP treatment on the structure and properties of NiAl-based turbine blades manufactured by laser powder bed fusion. Addit Manuf. 2020;31:100999.
   Web of Science ®Google Scholar
• Pogozhev YS, Loginov PA, Logachev IA, et al. The structure and properties of pre-alloyed NiAl-Cr (Co. Hf) spherical powders produced by plasma rotating electrode processing for additive manufacturing. Integr Med Res. 2018;7:461–468.
   Google Scholar
• Förner A, Giese S, Arnold C, et al. Nanoscaled eutectic NiAl-(Cr, Mo) composites with exceptional mechanical properties processed by electron beam melting. Sci Rep. 2020;10:1–9.
   PubMed Web of Science ®Google Scholar
• Levy GN, Schindel R, Kruth JP. Rapid manufacturing and rapid tooling with layer manufacturing (lm) technologies, state of the art and future perspectives. CIRP Ann. 2003;52(2):589–609.
   Web of Science ®Google Scholar
• Ford S, Mortara L, Minshall T. The emergence of additive manufacturing. Introduction to the special issue. Technol Forecast Soc Change. 2017;5:1–8.
   Google Scholar
• Wong KV, Hernandez A, et al. A review of additive manufacturing. ISRN Mech Eng. 2012;2012:1–10.
   Google Scholar
• Kruth JP, Leu MC, Nakagawac T, et al. Progress in additive manufacturing and rapid prototyping. CIRP Ann. 1998;47:525–540.
   Google Scholar
• Jinoop AN, P C, Bindra PKS. Laser-assisted directed energy deposition of nickel super alloys : a review. J Mater: Design Appl. 2019;0:1–25.
   Google Scholar