References
- Xu W, Birbilis N, Sha G, et al. A high-specific-strength and corrosion-resistant magnesium alloy. Nat Mater. 2015;14(12):1229–1235.
- Sha G, Sun X, Liu T, et al. Effects of Sc addition and annealing treatment on the microstructure and mechanical properties of the as-rolled Mg-3Li alloy. J Mater Sci Technol. 2011;27(8):753–758.
- Cao D, Wu L, Sun Y, et al. Electrochemical behavior of Mg-Li, Mg-Li-Al and Mg-Li-Al-Ce in sodium chloride solution. J Power Sources. 2008;177(2):624–630.
- Lv Y, Liu M, Xu Y, et al. The electrochemical behaviors of Mg–8Li–0.5 Y and Mg–8Li–1Y alloys in sodium chloride solution. J Power Sources. 2013;239:265–268.
- Wu RZ, Qu ZK, Zhang ML. Reviews on the influences of alloying elements on the microstructure and mechanical properties of Mg–Li base alloys. Rev Adv Mater Sci. 2010;24(3):35–43.
- Nayeb-Hashemi AA, Clark JB, Pelton AD. The Li-Mg (lithium-magnesium) system. Bull Alloy Phase Diagr. 1984;5(4):365–374.
- Kral MV, Muddle BC, Nie JF. Crystallography of the bcc/hcp transformation in a Mg-8Li alloy. Mater Sci Eng A. 2007;460:227–232.
- Wang J, Wu R, Feng J, et al. Influence of rolling strain on electromagnetic shielding property and mechanical properties of dual-phase Mg-9Li alloy. Mater Charact. 2019;157:109924.
- Guo J, Chang LL, Zhao YR, et al. Effect of Sn and Y addition on the microstructural evolution and mechanical properties of hot-extruded Mg-9Li-3Al alloy. Mater Charact. 2019;148:35–42.
- Sun Y, Wang R, Peng C, et al. Microstructure and corrosion behavior of as-homogenized Mg-xLi-3Al-2Zn-0.2 Zr alloys (x = 5, 8, 11 wt%). Mater Charact. 2020;159:110031.
- Sun Y, Wang R, Peng C, et al. Microstructure and corrosion behavior of as-extruded Mg-xLi-3Al-2Zn-0.2 Zr alloys (x = 5, 8, 11 wt.%). Corros Sci. 2020;167:108487.
- Nene SS, Kashyap BP, Prabhu N, et al. Microstructure refinement and its effect on specific strength and bio-corrosion resistance in ultralight Mg-4Li-1Ca (LC41) alloy by hot rolling. J Alloys Compd. 2014;615:501–506.
- Xiang Q, Jiang B, Zhang Y, et al. Effect of rolling-induced microstructure on corrosion behaviour of an as-extruded Mg-5Li-1Al alloy sheet. Corros Sci. 2017;119:14–22.
- Bialobrzeski A, Saja K, Żmudzińska M. Studies of corrosion behaviour in alkaline environment of binary Mg–Li alloys for plastic forming. Arch Foundry Eng. 2011;11(SI 3):21–24.
- Li CQ, Xu DK, Chen XB, et al. Composition and microstructure dependent corrosion behaviour of Mg-Li alloys. Electrochim Acta. 2018;260:55–64.
- Zou Y. Effects of alloying elements and processing on deformation mechanisms and properties of Mg-Li alloys [D. S. thesis]. Harbin: Harbin Engineering University; 2016. (in Chinese).
- Ma XL, Wang X, Li XL, et al. Effect of Al5Ti1B master alloy on microstructures and properties of AZ61 alloys. Trans Nonferrous Met Soc China. 2010;20:S397–S401.
- Song Y, Shan D, Chen R, et al. Corrosion characterization of Mg-8Li alloy in NaCl solution. Corros Sci. 2009;51(5):1087–1094.
- Zeng RC, Sun L, Zheng YF, et al. Corrosion and characterisation of dual phase Mg–Li–Ca alloy in Hank’s solution: the influence of microstructural features. Corros Sci. 2014;79:69–82.