References
- Wisbey A, Singh H, Lucas K, et al. Mechanical performance of extruded Ti-46Al- 5Nb-1W titanium aluminide. Mater Sci Technol. 2011;27:1059–1066.
- Brotzu A, Felli F, Marra F, et al. Mechanical properties of a TiAl-based alloy at room and high temperatures. Mater Sci Technol (United Kingdom). 2018;34:1847–1853.
- Kothari K, Radhakrishnan R, Wereley NM, et al. Microstructure and mechanical properties of consolidated gamma titanium aluminides. Powder Metall. 2007;50:21–27.
- Tetsui T. Gamma Ti aluminides for non-aerospace applications. Curr Opin Solid State Mater Sci. 1999;4:243–248.
- Tetsui T. Development of a TiAl turbocharger for passenger vehicles. Mater Sci Eng A. 2002;329–331:582–588.
- Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys. John Wiley; 2013.
- Aust E, Niemann H-R. Machining of γ-TiAl. Adv Eng Mater. 1999;1:53–57.
- Furusawa T, Hino H, Tsuji S, et al. Generation of defects due to machining of TiAl intermetallic compound and their effects on mechanical strength. J Manuf Sci Eng. 2004;126:506–514.
- Liu H-WW, Plucknett KP. Titanium aluminide (Ti-48Al) powder synthesis, size refinement and sintering. Adv Powder Technol. 2017;28:314–323.
- Soyama J, Oehring M, Ebel T, et al. Sintering behavior and microstructure formation of titanium aluminide alloys processed by metal injection molding. JOM. 2017;69:676–682.
- German RM. Powder metallurgy science. 2nd ed. Princeton NJ: Metal Powder Industry; 1994.
- Cooke RW, Hexemer RL, Donaldson IW, et al. Press-and-sinter processing of a PM counterpart to wrought aluminum 2618. J. Mater. Process. Technol. 2016;230:72–79.
- Kieback B. Swelling effects and densification during reaction sintering of Ti-Al elemental powder mixtures, in advances in powder metallurgy & particulate materials 1996 – Proc. 1996 World Congress on Powder Metallurgy & Particulate Materials, 1996.
- Yan M, Yang F, Lu B, et al. Microstructure and mechanical properties of high relative density γ-tial alloy using irregular pre-alloyed powder. Metals (Basel). 2021;11.
- Wang G-X, Dahms M. Reaction sintering of cold-extruded elemental powder mixture Ti-48Al. Metall Trans A. 1993;24:1517–1526.
- Wang GX, Dahms M. An effective method for reducing porosity in the titanium aluminide alloy Ti52Al48 prepared by elemental powder metallurgy. Scr Metall Mater. 1992;26:1469–1474.
- Trzaska Z, Bonnefont G, Fantozzi G, et al. Comparison of densification kinetics of a TiAl powder by spark plasma sintering and hot pressing. Acta Mater. 2017;135:1–13.
- Kassym K, Perveen A. Atomization processes of metal powders for 3D printing. Mater Today Proc. 2020;26:1727–1733.
- Soyama J, Oehring M, Limberg W, et al. The effect of zirconium addition on sintering behaviour, microstructure and creep resistance of the powder metallurgy processed alloy Ti-45Al-5Nb-0.2B-0.2C. Mater Des. 2015;84:87–94.
- Soyama J, Limberg W, Ebel T, et al. Sintering and creep resistance of powder-metallurgy-processed Ti-(43-47)Al-5Nb-0.2B-0.2C. Adv Eng Mater. 2020;22:2000377.
- Soyama J, Oehring M, Limberg W, et al. Sintering behaviour of Ti-45Al-5Nb-0.2B-0.2C alloy modifications by additions of elemental titanium and aluminium. Powder Metall. 2015;58:369–375.
- Sina H, Iyengar S. Reactive synthesis and characterization of titanium aluminides produced from elemental powder mixtures. J Therm Anal Calorim. 2015;122:689–698.
- Wang T, Liu R, Zhu M, et al. Activation energy of self-heating process studied by DSC. J Therm Anal Calorim. 2002;70:507–519.
- Schuster JC, Palm M. Reassessment of the binary aluminum-titanium phase diagram. J Phase Equilibria Diffus. 2006;27:255–277.
- Wang PY, Li HJ, Qi LH, et al. Synthesis of Al-TiAl3 compound by reactive deposition of molten Al droplets and Ti powders. Prog Nat Sci Mater Int. 2011;21:153–158.
- Yang JB, Hwang WS. The preparation of TiAl-based intermetallics from elemental powders through a two-step pressureless sintering process. J Mater Eng Perform. 1998;7:385–392.
- Novák P, Popela T, Kubásek J, et al. Effect of reactive sintering conditions on microstructure of in situ titanium aluminide and silicide composites. Powder Metall. 2011;54:50–55.
- Hoosain S, Pityana S, Freemantle C, et al. Heat treatment of in situ laser-fabricated titanium aluminide. Metals (Basel). 2018;8:655.
- Rastkar AR, Parseh P, Darvishnia N, et al. Microstructural evolution and hardness of TiAl 3 and TiAl 2 phases on Ti-45Al-2Nb-2Mn-1B by plasma pack aluminizing. Appl Surf Sci. 2013;276:112–119.
- Ahmed YMZ, Iskander BA, Ibrahim M, et al. Mechanical properties and porosity relationship of porous iron compacts. Powder Metall. 2009;52:72–79.