References
- Sarkar S, Militzer M. Microstructure evolution model for hot strip rolling of Nb–Mo microalloyed complex phase steel. Mater Sci Technol. 2009;25(9):1134–1146.
- Contreras A, López A, Gutiérrez EJ, et al. An approach for the design of multiphase advanced high-strength steels based on the behavior of CCT diagrams simulated from the intercritical temperature range. Mater Sci Eng A. 2020;772:138708.
- Bleck W, Brühl F, Ma Y, et al. Materials and processes for the third-generation advanced high-strength steels. BHM Berg-und Hüttenmännische Monatshefte. 2019;164(11):466–474.
- Lesch C, Kwiaton N, Klose FB. Advanced high strength steels (AHSS) for automotive applications − tailored properties by smart microstructural adjustments. Steel Res Int. 2017;88(10):1700210.
- Dong R, Zhao AM, Ding R, etal Microstructure and mechanical properties of TRIP-aided steels with different heat treatments. In: Yafang Han, Xuefeng Liu, Ying Wu, editors. Materials science forum. Baech, Switzerland: Trans Tech Publications Ltd. 2015. Vol. 817, pp. 439–443.
- Sugimoto KI, Iida T, Sakaguchi J, et al. Retained austenite characteristics and tensile properties in a TRIP type bainitic sheet steel. ISIJ Int. 2000;40(9):902–908.
- Murata T, Hamamoto S, Utsumi Y, et al. Characteristics of 1180 MPa grade cold-rolled steel sheets with excellent formability. Kobelco Technol Rev. 2017;45:17–20.
- Hojo T, Kumai B, Koyama M, et al. Hydrogen embrittlement resistance of pre-strained ultra-high-strength low alloy TRIP-aided steel. Int J Fract. 2020;224(2):253–260.
- Sugimoto KI, Murata M, Muramatsu T, et al. Formability of C–Si–Mn–Al–Nb–Mo ultra high-strength TRIP-aided sheet steels. ISIJ Int. 2007;47(9):1357–1362.
- Sugimoto KI, Yu B, Mukai YI, et al. Microstructure and formability of aluminum bearing TRIP-aided steels with annealed martensite matrix. ISIJ Int. 2005;45(8):1194–1200.
- Sugimoto KI, Kanda A, Kikuchi R, et al. Ductility and formability of newly developed high strength low alloy TRIP-aided sheet steels with annealed martensite matrix. ISIJ Int. 2002;42(8):910–915.
- Li Y, Ding W, Wang B. Intercritical annealing pre-treatment used in a hot-dip galvanised TRIP steel. Mater Sci Technol. 2019;35(11):1372–1380.
- Zhao J, Jiang Z. Thermomechanical processing of advanced high strength steels. Prog Mater Sci. 2018;94:174–242.
- Hashimoto S, Ikeda S, Sugimoto KI, et al. Effects of Nb and Mo addition to 0.2% C-1.5% Si-1.5% Mn steel on mechanical properties of hot rolled TRIP-aided steel sheets. ISIJ Int. 2004;44(9):1590–1598.
- Skálová L, Divišová R, Jandová D. Thermo-mechanical processing of low-alloy TRIP-steel. J Mater Process Technol. 2006;175(1–3):387–392.
- Dai Z, Chen H, Ding R, et al. Fundamentals and application of solid-state phase transformations for advanced high strength steels containing metastable retained austenite. Mater Sci Eng R: Reports. 2021;143:100590.
- Ramazani A, Quade H, Abbasi M, et al. The effect of martensite banding on the mechanical properties and formability of TRIP steels. Mater Sci Eng A. 2016;651:160–164.
- Chen SC, Wang YT, Lin YC, et al. Microstructure and mechanical behaviors of GPa-grade TRIP steels enabled by hot-rolling processes. Mater Sci Eng A. 2019;761:138005.
- Qian L, Li K, Huang F, et al. Enhancing both strength and ductility of low-alloy transformation-induced plasticity steel via hierarchical lamellar structure. Scr Mater. 2020;183:96–101.
- Li X, Ramazani A, Prahl U, et al. Quantification of complex-phase steel microstructure by using combined EBSD and EPMA measurements. Mater Charact. 2018;142:179–186.
- Gourgues A-F, Flower HM, Lindley TC. Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures. Mater. Sci. Technol. 2000;16(1):26–40.
- Petrov R, Kestens L, Wasilkowska A, et al. Microstructure and texture of a lightly deformed TRIP-assisted steel characterized by means of the EBSD technique. Mater Sci Eng A. 2007;447(1–2):285–297.
- Pinard PT, Schwedt A, Ramazani A, et al. Characterization of dual-phase steel microstructure by combined submicrometer EBSD and EPMA carbon measurements. Microsc Microanal. 2013;19(4):996–1006.
- Bunge HJ. Texture analysis in Materials Science: mathematical methods. 2nd ed. Butterworth-Heinemann: Elsevier; 2013.
- Standard ASTM. E8 standard test method for tension testing of metallic materials. West Conshohocken (PA): ASTM; 2004.
- Erişir E, Bilir OG. Effect of intercritical annealing temperature on martensite and bainite start temperatures after partial austenitization. JOM. 2016;68(1):203–209.
- Wright SI, Nowell MM, Field DP. A review of strain analysis using electron backscatter diffraction. Microsc Microanal. 2011;17(3):316–329.
- Lee SI, Lee J, Hwang B. Microstructure-based prediction of yield ratio and uniform elongation in high-strength bainitic steels using multiple linear regression analysis. Mater Sci Eng A. 2019;758:56–59.
- Mayo U, Isasti N, Rodríguez-Ibabe JM, et al. Analysis of strain partitioning in intercritically deformed microstructures via interrupted tensile tests. Metals (Basel). 2021;11(1):112.
- Kang M, Park M, Kim B, et al. Effect of heat treatment on microstructure and mechanical properties of high-strength steel for in hot forging products. Metals (Basel). 2021;11(5):768.
- Tomaz RF, Santos DB, Camey K, et al. Complex phase quantification methodology using electron backscatter diffraction (EBSD) on low manganese high temperature processed steel (HTP) microalloyed steel. J Mater Res Technol. 2019;8(2):2423–2431.
- Hojo T, Kikuchi R, Waki H, et al. Effect of strain rate on the hydrogen embrittlement property of ultra high-strength low alloy TRIP-aided steel. ISIJ Int. 2018;58(4):751–759.
- Frómeta D, Parareda S, Lara A, et al. Identification of fracture toughness parameters to understand the fracture resistance of advanced high strength sheet steels. Eng Fract Mech. 2020;229:106949.
- Hojo T, Sugimoto KI, Mukai Y, et al. Effects of aluminum on delayed fracture properties of ultra high strength low alloy TRIP-aided steels. ISIJ Int. 2008;48(6):824–829.
- Ruggles T, Cluff S, Miles M, et al. Ductility of advanced high-strength steel in the presence of a sheared edge. JOM. 2016;68(7):1839–1849.