References
- Read N, Wang W, Essa K, et al. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development. Mater Des. 2015;65:417–424.
- Li B, Wang HW, Jie JC, et al. Effects of yttrium and heat treatment on the microstructure and tensile properties of Al-7.5Si-0.5Mg alloy. Mater Des. 2011;32:1617–1622.
- Liao H, Wu Y, Zhou K, et al. Hot deformation behavior and processing map of Al-Si-Mg alloys containing different amount of silicon based on Gleebe-3500 hot compression simulation. Mater Des. 2015;65:1091–1099.
- Lin YC, Luo SC, Huang J, et al. Effects of solution treatment on microstructures and micro-harness of a Sr-modified Al-Si-Mg alloy. Mater Sci Eng. 2018;725:530–540.
- McDonald SD, Nogita K, Dahle AK. Eutectic nucleation in AL-Si alloys. Acta Mater. 2004;52:4273–4280.
- Lu L, Nogita K, Dahle AK. Combining Sr and Na additions in hypoeutectic Al-Si foundry alloys. Mater Sci Eng A. 2005;399:244–253.
- Wang F, Liu Z, Qiu D, et al. Revisiting the role of peritectics in grain refinement of Al alloys. Acta Mater. 2013;61:360–370.
- Nogita K, McDonald SD, Dahle AK. Eutectic modification of Al-Si alloys with rare earth metals. Mater Trans. 2004;45:323–326.
- Chen ZW, Lei YM, Zhang HF. Structure and properties of nanostructured A357 alloy produced by melt spinning compared with direct chill ingot. J Alloy Compd. 2011;509:7473–7477.
- Li XP, Wang XJ, Saunders M, et al. A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility. Acta Mater. 2015;95:74–82.
- Fischer P, Romano V, Weber HP, et al. Sintering of commercially pure titanium powder with a Nd:YAG laser source. Acta Mater. 2003;51:1651–1662.
- Li YL, Gu DD. Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder. Mater Des. 2014;63:856–867.
- Zhang W, Zhu H, Hu Z, et al. Study on the selective laser melting of AlSi10Mg. Acta Metall. 2017;53(8):918–926.
- Weingarten C, Buchbinder D, Pirch N, et al. Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg. J Mater Process Technol. 2015;221:112–120.
- Aboulkhair NT, Maskey I, Ashcroft I, et al. The role of powder properties on the processability of aluminium alloys in selective laser melting[C]//Laser World of Photonics Congress 2015: Lasers in manufacturing conference; 2015.
- Boschetto A, Bottini L, Veniali F. Roughness modeling of AlSi10Mg parts fabricated by selective laser melting. J Mater Process Technol. 2017;241:154–163.
- Han X, Zhu H, Nie X, et al. Investigation on selective laser melting AlSi10Mg cellular lattice strut: molten pool morphology, surface roughness and dimensional accuracy. Materials. 2018;11:392.
- Thijs L, Kempen K, Kruth JP, et al. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder. Acta Mater. 2013;61:1809–1819.
- Finfrock CB, Exil A, Carroll JD, et al. Effect of hot isostatic pressing and powder feedstock on porosity, microstructure, and mechanical properties of selective laser melted AlSi10Mg. Metallogr Anal. 2018;7:443–456.
- Tradowsky U, White J, Ward RW, et al. Selective laser melting of AlSi10Mg: influence of post-processing on the microstructural and tensile properties development. Mater Des. 2016;105:212–222.
- Liu S, Zhu H, Peng G, et al. Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis. Mater Des. 2018;142:319–328.
- Aboulkhair NT, Maskery I, Tuck C, et al. The microstructure and mechanical properties of selectively laser melted AlSi10Mg: the effect of a conventional T6-like heat treatment. Mater Sci Eng A. 2016;667:139–146.
- Li W, Li S, Liu J, et al. Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties and fracture mechanism. Mater Sci Eng A. 2016;663:116–125.
- Zhou L, Mehta A, Schulz E, et al. Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment. Mater Charact. 2018;143:5–17.
- Gu XH, Zhang JX, Fan XL, et al. Corrosion behavior of selective laser melted AlSi10Mg alloy in NaCl solution and its dependence on heat treatment. Acta Metall Sin. 2020;33:327–337.
- Gu XH, Zhang JX, Fan XL, et al. Abnormal corrosion behavior of selective laser melted AlSi10Mg alloy induced by heat treatment at 300°C. J Alloys Compd. 2019;803:314–324.
- Lattanzi L, Merlin M, Fortini A, et al. Effect of thermal exposure simulating vapor deposition on the impact behavior of additively manufactured AlSi10Mg alloy. J Mater Eng Perform. 2022;31:2859–2869.
- Fiocchi J, Biffi CA, Colombo C, et al. Ad hoc heat treatments for selective laser melted AlSi10Mg alloy aimed at stress-relieving and enhancing mechanical performances. JOM. 2020;72:1118–1127.
- Giovagnoli M, Tocci M, Fortini A, et al. Effect of different heat-treatment routes on the impact properties of an additively manufactured AlSi10Mg alloy. Mater Sci Eng A. 2021;802:140671.
- Girelli L, Tocci M, Gelfi M, et al. Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy. Mater Sci Eng A. 2019;739:317–328.
- Giovagnoli M, Silvi G, Merlin M, et al. Optimisation of process parameters for an additively manufactured AlSi10Mg alloy: limitations of the energy density-based approach on porosity and mechanical properties estimation. Mater Sci Eng A. 2021;802:140613.
- Maeshima T, Oh-ishi K. Solute clustering and supersaturated solid solution of AlSi10Mg alloy fabricated by selective laser melting. Sci Direct. 2019;5:e01186.
- Yan CZ, Hao L, Hussein A, et al. Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering. Mater Sci Eng A. 2015;628:238–246.
- Liu YJ, Liu Z, Jiang Y, et al. Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg. J Alloys Compd. 2018;735:1414–1421.
- Kruth JP, Froyen L, Van Vaerenbergh J, et al. Selective laser melting of iron-based powder. J Mater Process Tech. 2004;149:616–622.
- Silvestri AT, A A, Hassanin AE, et al. Assessment of the mechanical properties of AlSi10Mg parts produced through selective laser melting under different conditions. Proc Manuf. 2020;47:1058–1064.
- Yakout M, Elbestawi MA, Veldhuis SC. Density and mechanical properties in selective laser melting of invar 36 and stainless steel 316L. J Mater Process Tech. 2019;266:397–420.
- Dong XH, Hong XT, Chen F, et al. Effects of specimen and grain sizes on compression strength of annealed wrought copper alloy at room temperature. Mater Des. 2014;64:400–406.
- Yeh JW, Yuan SY, Peng CH. A reciprocating extrusion process for producing hypereutectic Al −20wt%Si wrought alloys. Mater Sci Eng A. 1998;252:212–221.
- Takata N, Kodaira H, Sekizawa K, et al. Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments. Mater Sci Eng A. 2017;704:218–228.
- Fiocchi J, Tuissi A, Bassani P, et al. Low temperature annealing dedicated to AlSi10Mg selective laser melting products. J Alloys Compd. 2017;695:3402–3409.