Corrosion behaviour of Sn-9Zn-xS solders in 3.5 wt-% NaCl solution

References

• Tu KN, Zeng K. Tin-lead (SnPb) solder reaction in flip chip technology. Mater Sci Eng R. 2001;34:1–58.
   Web of Science ®Google Scholar
• Suganuma K. Advances in lead-free electronics soldering. Curr Opin Solid State Mater Sci. 2001;5:55–64.
   Web of Science ®Google Scholar
• Abtew M, Selvaduray G. Lead-free solders in microelectronics. Mater Sci Eng R. 2000;27:95–141.
   Web of Science ®Google Scholar
• Lillie E, Sandborn P, Humphrey D. Assessing the value of a lead-free solder control plan using cost-based FMEA. Microelectron Reliab. 2015;55:969–979.
   Web of Science ®Google Scholar
• Wang J, Sun Q, Tang XX, et al. Influence mechanism of Au layer thickness on wettability of Sn-Ag-Cu solder on heated ENIG pads. Vacuum. 2022;201:111074.
   Web of Science ®Google Scholar
• Nogita K. Stabilisation of Cu6Sn5 by Ni in Sn-0.7Cu-0.05Ni lead-free solder alloys. Intermetallics. 2010;18:145–149.
   Web of Science ®Google Scholar
• Li JF, Mannan SH, Clode MP, et al. Interfacial reactions between molten Sn-Bi-X solders and Cu substrates for liquid solder interconnects. Acta Mater. 2006;54:2907–2922.
   Web of Science ®Google Scholar
• Suganuma K, Kim KS. Sn-Zn low temperature solder. J Mater Sci Mater Electron. 2007;18:121–127.
   Web of Science ®Google Scholar
• Chen JS, Zhang HZ, Zhang PL, et al. The Zn accumulation behavior, phase evolution and void formation in Sn-xZn/Cu systems by considering trace Zn: a combined experimental and theoretical study. J Mater Res Technol. 2019;8:4141–4150.
   Google Scholar
• Rani S D, Murthy GS. Impression creep behaviour of tin based lead free solders. Mater Sci Technol. 2004;20:403–408.
   Web of Science ®Google Scholar
• Garcia LR, Osorio WR, Peixoto LC, et al. Mechanical properties of Sn-Zn lead-free solder alloys based on the microstructure array. Mater Charact. 2010;61:212–220.
   Web of Science ®Google Scholar
• Gain AK, Zhang LC. Nanoindentation creep, elastic properties, and shear strength correlated with the structure of Sn-9Zn-0.5nano-Ag alloy for advanced green electronics. Metals (Basel). 2020;10:1137–1148.
   Web of Science ®Google Scholar
• Garcia LR, Osorio WR, Peixoto LC, et al. Wetting behavior and mechanical properties of Sn-Zn and Sn-Pb solder alloys. J Electron Mater. 2009;38:2405–2414.
   Web of Science ®Google Scholar
• Zhou J, Sun YS, Xue F. Properties of low melting point Sn-Zn-Bi solders. J Alloys Compd. 2005;397:260–264.
   Web of Science ®Google Scholar
• Xu KK, Zhang L, Gao LL, et al. Review of microstructure and properties of low temperature lead-free solder in electronic packaging. Sci Technol Adv Mater. 2020;21:689–711.
   PubMed Web of Science ®Google Scholar
• Chen X, Li M, Ren XX, et al. Effect of small additions of alloying elements on the properties of Sn-Zn eutectic alloy. J Electron Mater. 2006;35:1734–1739.
   Web of Science ®Google Scholar
• Li S, Wang X, Liu Z, et al. Corrosion behavior of Sn-based lead-free solder alloys: a review. J Mater Sci Mater Electron. 2020;31:9076–9090.
   Web of Science ®Google Scholar
• Nazeri MFM, Yahaya MZ, Gursel A, et al. Corrosion characterization of Sn-Zn solder: a review. Solder Surf Mater Technol. 2019;31:52–67.
   Web of Science ®Google Scholar
• Nazeri MFM, Affendy MG, Mohamad AA. Corrosion study of Sn-9Zn lead-free solder in alkaline solution. Int J Electrochem Sci. 2012;7:4182–4191.
   Web of Science ®Google Scholar
• Liu JC, Wang ZH, Xie JY, et al. Understanding corrosion mechanism of Sn-Zn alloys in NaCl solution via corrosion products characterization. Mater Corros. 2016;67:522–530.
   Web of Science ®Google Scholar
• Chang TC, Hon MH, Wang MC, et al. Electrochemical behaviors of the Sn-9Zn-xAg lead-free solders in a 3.5 wt.% NaCl solution. J Electrochem Soc. 2004;151:C484–C491.
   Web of Science ®Google Scholar
• Liu MM, Yang WC, Ma YY, et al. The electrochemical corrosion behavior of Pb-free Sn-8.5Zn-xCr solders in 3.5 wt.% NaCl solution. Mater Chem Phys. 2015;168:27–34.
   Web of Science ®Google Scholar
• Wang ZH, Chen CT, Jiu JT, et al. Electrochemical behavior of Sn-9Zn-xTi lead-free solders in neutral 0.5M NaCl solution. J Mater Eng Perform. 2018;27:2182–2191.
   Web of Science ®Google Scholar
• Liu JC, Zhang G, Ma JS, et al. Ti addition to enhance corrosion resistance of Sn-Zn solder alloy by tailoring microstructure. J Alloys Compd. 2015;644:113–118.
   Web of Science ®Google Scholar
• Liu GY, Khorsand S, Ji SX. Electrochemical corrosion behaviour of Sn-Zn-xBi alloys used for miniature detonating cords. J Mater Sci Technol. 2019;35:1618–1628.
   Web of Science ®Google Scholar
• Nazeri MFM, Mohamad AA. Corrosion resistance of ternary Sn-9Zn-xIn solder joint in alkaline solution. J Alloys Compd. 2016;661:516–525.
   Web of Science ®Google Scholar
• Wei XQ, Li YH, Huang HZ. Effects of Sulfur on the properties of Sn-9Zn as lead-free solder. J Electron Mater. 2017;46:1067–1071.
   Web of Science ®Google Scholar
• Huang HZ, Shuai GW, Wei XQ, et al. Effects of sulfur addition on the wettability and corrosion resistance of Sn-0.7Cu lead-free solder. Microelectron Reliab. 2017;74:15–21.
   Web of Science ®Google Scholar
• Mohanty US, Lin KL. Potentiodynamic polarization measurement of Sn-8.5Zn-xAl-0.5Ga alloy in 3.5% NaCl solution. J Electrochem Soc. 2006;153:319–324.
   Web of Science ®Google Scholar
• Mohanty US, Lin KL. Electrochemical corrosion behaviour of lead-free Sn-8.5Zn-xAg-0.1Al-0.5Ga solder in 3.5% NaCl solution. Mater Sci Eng A. 2005;406:34–42.
   Web of Science ®Google Scholar
• Abayarathna D, Hale EB, Okeefe TJ, et al. Effects of sample orientation on the corrosion of zinc in ammonium-sulfate and sodium-hydroxide solutions. Corros Sci. 1991;32:755–768.
   Web of Science ®Google Scholar
• McCafferty E. Validation of corrosion rates measured by the Tafel extrapolation method. Corros Sci. 2005;47:3202–3215.
   Web of Science ®Google Scholar
• Liu KL, Chen CX, He J, et al. Microstructure, corrosion behavior and rust resistance of Ti and Ce added invar alloys. Mater Res Express. 2021;8:096518.
   Web of Science ®Google Scholar
• Liu JC, Park S, Nagao S, et al. The role of Zn precipitates and Cl- anions in pitting corrosion of Sn-Zn solder alloys. Corros Sci. 2015;92:263–271.
   Web of Science ®Google Scholar
• Liu JC, Wang ZH, Xie JY, et al. Effects of intermetallic-forming element additions on microstructure and corrosion behavior of Sn-Zn solder alloys. Corros Sci. 2016;112:150–159.
   Web of Science ®Google Scholar
• Brug GJ, Vandeneeden ALG, Sluytersrehbach M, et al. The analysis of electrode impedances complicated by the presence of a constant phase element. J Electroanal Chem. 1984;176:275–295.
   Web of Science ®Google Scholar
• Liu JC, Zhang G, Nagao S, et al. Metastable pitting and its correlation with electronic properties of passive films on Sn-xZn solder alloys. Corros Sci. 2015;99:154–163.
   Web of Science ®Google Scholar
• Prabhu KN, Deshapande P. Effect of cooling rate during solidification of Sn-9Zn lead-free solder alloy on its microstructure, tensile strength and ductile-brittle transition temperature. Mater Sci Eng A. 2012;533:64–70.
   Web of Science ®Google Scholar
• Ralston KD, Birbilis N, Davies CHJ. Revealing the relationship between grain size and corrosion rate of metals. Scripta Mater. 2010;63:1201–1204.
   Web of Science ®Google Scholar
• Falk T, Svensson JE, Johansson LG, et al. The influence of CO2 and NaCl on the atmospheric corrosion of zinc – a laboratory study. J Electrochem Soc. 1998;145:2993–2999.
   Web of Science ®Google Scholar