Laser welding of ZrO₂ ceramic and 304 stainless steel with Ag–Cu–Ti filler

References

• Liu G, Zhang X, Yang J, et al. Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): joining processes, joint strength, and interfacial behavior. J Adv Ceram. 2019;8(1):19–38.
   Web of Science ®Google Scholar
• Zhang Y, Chen YK, Yu DS, et al. A review paper on effect of the welding process of ceramics and metals. J Mater Res Technol. 2020;9(6):16214–16236.
   Google Scholar
• Cao J, Wang Z, Li C, et al. Microstructure evolution and mechanical properties of Co coated AISI 441 ferritic stainless steel/YSZ reactive air brazed joint. Int J Hydrogen Energy. 2021;46(12):8758–8766.
   Web of Science ®Google Scholar
• Alves F, Baptista AM, Marques AT. Adv Compos Mater Aerosp Eng. England: Woodhead Publishing; 2016. p. 59–99.
   Google Scholar
• Atabaki MM. Recent progress in joining of ceramic powder metallurgy products to metals. Metalurgija Sisak Then Zagreb. 2010;16(4):255–268.
   Google Scholar
• Wang Y, Zhao YT, Yang ZW, et al. Microstructure, residual stress and mechanical properties of Al2O3/Nb joints vacuum-brazed with two Ag-based active fillers. Vacuum. 2018;158:14–23.
   Web of Science ®Google Scholar
• Cheng M, He P, Lei L, et al. Comparative studies on microstructure evolution and corrosion resistance of 304 and a newly developed high Mn and N austenitic stainless steel welded joints. Corros Sci. 2021;183:109338.
   Web of Science ®Google Scholar
• Gateman SM, Alidokht SA, Mena-Morcillo E, et al. Wear resistant solid lubricating coatings via compression molding and thermal spraying technologies. Surf Coat Technol. 2021;426:127790.
   Web of Science ®Google Scholar
• Wang FZ, Wang QZ, Yu BH, et al. Interface structure and mechanical properties of Ti (C, N)-based cermet and 17-4PH stainless steel joint brazed with nickel-base filler metal BNi-2. J Mater Process Technol. 2011;211(11):1804–1809.
   Web of Science ®Google Scholar
• Pan L, Gu J, Zou W, et al. Brazing joining of Ti3AlC2 ceramic and 40Cr steel based on Ag-Cu-Ti filler metal. J Mater Process Technol. 2018;251:181–187.
   Web of Science ®Google Scholar
• Zhu Y, Qi D, Guo W, et al. The braze joint between Al2O3 to 1Cr18Ni9Ti using a nickel foam. Weld World. 2015;59(4):491–496.
   Web of Science ®Google Scholar
• Hausner S, Wielage B. Brazing of metal and ceramic joints. Advances in brazing. England: Woodhead Publishing; 2013. p. 361–393.
   Google Scholar
• Wang Y, Yang ZW, Zhang LX, et al. Low-temperature diffusion brazing of actively metallized Al2O3 ceramic tube and 5A05 aluminum alloy. Mater Des. 2015;86:328–337.
   Web of Science ®Google Scholar
• Guo W, Wang L, Zhu Y, et al. Microstructure and mechanical properties of C/C composite/TC4 joint with inactive AgCu filler metal. Ceram Int. 2015;41(5):7021–7027.
   Web of Science ®Google Scholar
• Tillmann W, Anar NB, Wojarski L. Mechanical behavior of reactive air brazed (RAB) Crofer 22 APU-Al2O3 joints at ambient temperature. SN Appl Sci. 2020;2(5):1–12.
   Web of Science ®Google Scholar
• Avettand-Fènoël MN, Naji K, Pouligny P. Brazing vs. diffusion welding of graded Fe based matrix composite and yttria stabilized zirconia. J Manuf Process. 2019;45:557–570.
   Web of Science ®Google Scholar
• Hou XH, Yu JK. Effect of Na2B4O7 addition on the structure and properties of Al2O3 ceramic-lined steel pipe prepared by the GS-SHS method. Ceramics–Silikáty. 2018;62(1):74–80.
   Web of Science ®Google Scholar
• Tillmann W, Schaak C, Pfeiffer J.. Reactive partial transient liquid phase bonding (R-PTLPB) of YSZ to Crofer22APU using Nickel and Copper-Nickel as core interlayers. 2015;403–410.
   Google Scholar
• Yan Y, Liu B, Xu T, et al. Realizing the air brazing of ZrO2 ceramics through Al metal. J Materiomics. 2022;8(3):662–668.
   Web of Science ®Google Scholar
• He H, Du X, Huang X, et al. The effect of Mo particles addition in Ag-Cu-Ti filler alloy on Ti (C, N)-based cermet/45 steel-brazed joints. J Mater Eng Perform. 2018;27(5):2438–2445.
   Web of Science ®Google Scholar
• Xue H, Li T, Guo W, et al. Effect of graphite content on microstructure and properties of Al2O3 ceramic and 304 stainless steel brazed joints. Mater Lett. 2022;307:131050.
   Web of Science ®Google Scholar
• Jia L, Guangmin S, Li H. Ti/Nb as interlayer pulse pressure diffusion bonding TiC cermet and stainless steel. Mater Eng. 2017;45(3):54–59.
   Google Scholar
• Huang W, Li Y, Wang J. Shear strength and fracture characteristics of the Al2O3-TiC/Q235 vacuum diffusion bonded joint. Kov Mater Met Mater. 2016;54(1):55–60.
   Web of Science ®Google Scholar
• Weiqi Y, Jincheng L, Run A, et al. High shear strength and ductile ZrC–SiC/austenitic stainless steel joints bonded with Ti/Ni foam interlayer. Ceram Int. 2020;46(3):3036–3042.
   Web of Science ®Google Scholar
• Guedes A, Pinto AMP. Active metal brazing of machinable aluminum nitride-based ceramic to stainless steel. J Mater Eng Perform. 2012;21(5):671–677.
   Web of Science ®Google Scholar
• Miab RJ, Hadian AM. Effect of brazing time on microstructure and mechanical properties of cubic boron nitride/steel joints. Ceram Int. 2014;40(6):8519–8524.
   Web of Science ®Google Scholar
• He YM, Zhang J, Sun Y, et al. Microstructure and mechanical properties of the Si3N4/42CrMo steel joints brazed with Ag–Cu–Ti + Mo composite filler. J Eur Ceram Soc. 2010;30(15):3245–3251.
   Web of Science ®Google Scholar
• Xu XP, Liu QM, Xia CZ, et al. Microstructure and properties of Si3N4 ceramics and 304 stainless steel brazed joint with Cu/Ag-Cu/Ti laminated filler metal. High Temp Mater Processes. 2018;37(6):597–602.
   Web of Science ®Google Scholar
• Sun R, Zhu Y, Guo W, et al. Microstructural evolution and thermal stress relaxation of Al2O3/1Cr18Ni9Ti brazed joints with nickel foam. Vacuum. 2018;148:18–26.
   Web of Science ®Google Scholar
• Kar A, Ray AK. Characterization of Al2O3–304 stainless steel braze joint interface. Mater Lett. 2007;61(14–15):2982–2985.
   Web of Science ®Google Scholar
• Smith WF, Hashemi J. Foundations of materials science and engineering. New York: Mcgraw-Hill Publishing; 2006.
   Google Scholar
• Yajiang L, Juan W, Yansheng Y, et al. The diffusion of interface elements between Fe_3Al alloy and Q235 steel diffusion welding. J Weld. 2005;04:41–44.
   Google Scholar
• Yajiang L, Juan W, Yansheng Y, et al. Element diffusion near the interface of Fe_3Al/18-8 stainless steel diffusion welding. J Metal. 2005;02:150–156.
   Google Scholar
• Peng H, Jicai F, Yicai Q, et al. Numerical analysis of element concentration distribution in diffusion bonding zone. J Weld. 2002;03:80–82.
   Google Scholar
• Garg SP, Kale GB, Patil RV, et al. Thermodynamic interdiffusion coefficient in binary systems with intermediate phases. Intermetallics. 1999;7(8):901–908.
   Web of Science ®Google Scholar
• Bhanumurthy K, Kale GB, Khera SK, et al. Solid-state diffusion reaction and formation of intermetallic compounds in the nickel-zirconium system. Metall Trans A. 1990;21(11):2897–2903.
   Web of Science ®Google Scholar
• Van Loo FJJ, Pieraggi B, Rapp RA. Interface migration and the Kirkendall effect in diffusion-driven phase transformations. Acta Metall Mater. 1990;38(9):1769–1779.
   Google Scholar
• Zhaorong L. Metal superplastic forming principle and application. Beijing: Aviation Industry Publishing House; 1990–1992.
   Google Scholar
• Peng H, Jiuhai Z, Jicai F, et al. Numerical simulation of phase transition diffusion bonding interface to generate intermetallic compounds. J Weld. 2000;03:75–78.
   Google Scholar
• Peng L. Study on microstructure and element diffusion of Mg/Al active dissimilar metal welding interface. Shandong: Shandong University; 2006. p. 94–120.
   Google Scholar
• Kangsheng H, Fuxiong C. Welding of dissimilar metals. Beijing: Mechanical Industry Press; 1986; p. 309–322.
   Google Scholar
• Wagner C. The evaluation of data obtained with diffusion couples of binary single-phase and multiphase systems. Acta Metall. 1969;17(2):99–107.
   Google Scholar
• Pieraggi B, Rapp RA, Van Loo FJJ, et al. Interfacial dynamics in diffusion-driven phase transformations. Acta Metall Mater. 1990;38(9):1781–1788.
   Google Scholar
• Dorfman S, Fuks D, Mehrer H. Methodological aspects of calculations of the thermodynamic factor in interdiffusion. The European Physical Journal B-Condensed Matter and Complex Systems. 1998;3(2):175–178.
   Web of Science ®Google Scholar
• Duchenko OV, Vereshchaka VM, Dybkov VI. Phase formation and reaction kinetics in Co-Zn diffusion couples. J Alloys Compd. 1999;288(1–2):164–169.
   Web of Science ®Google Scholar
• Sung YM. Determination of interdiffusion coefficient of mullite formation reaction via kinetics analysis. J Mater Sci Lett. 2001;20(15):1433–1434.
   Google Scholar
• Changxu S, Hengde L, Lian Z. Handbook of materials science and engineering. Beijing: Chemical Industry Press; 2004.
   Google Scholar
• Yan Y, Liu T, Lin J, et al. Interaction between the third alloying element and the interfacial structure of AgCu-alloy brazed heterogeneous metal integration. J Alloys Compd. 2021;883:160933.
   Web of Science ®Google Scholar
• Qiangyong Z, Xianrui Z, Guixiang L, et al. 304 stainless steel laser welding process and numerical simulation. Electr Welding Mach. 2021;51(04):1–8.
   Google Scholar
• Jialei Z, Shilong X, Xiangdong J, et al. Research on laser lap welding process of 304 stainless steel sheet. Prog Laser Optoelectron. 2015;52(07):160–164.
   Google Scholar
• Wang P, Xu Z, Liu X, et al. Regulating the interfacial reaction of Sc2W3O12/AgCuTi composite filler by introducing a carbon barrier layer. Carbon N Y. 2022;191:290–300.
   Web of Science ®Google Scholar
• Peng L, Mao Y, Zhang Y, et al. Microstructural and mechanical characterizations of W/CuCrZr and W/steel joints brazed with Cu-22TiH2 filler. J Mater Process Technol. 2018;254:346–352.
   Web of Science ®Google Scholar
• Yan Y, Lin J, Liu T, et al. Corrosion behavior of stainless steel-tungsten carbide joints brazed with AgCuX (X= In, Ti) alloys. Corros Sci. 2022;200:110231.
   Web of Science ®Google Scholar
• Xiong H, Chen B, Zhao H, et al. V-containing-active high-temperature brazes for ceramic joining. Weld World. 2016;60(1):99–108.
   Web of Science ®Google Scholar
• Song TF, Jiang XS, Shao ZY, et al. Microstructure and mechanical properties of vacuum diffusion bonded joints between Ti-6Al-4V titanium alloy and AISI316L stainless steel using Cu/Nb multi-interlayer. Vacuum. 2017;145:68–76.
   Web of Science ®Google Scholar
• Zhang Y, Chen YK, Zhou JP, et al. Experimental and numerical study on microstructure and mechanical properties for laser welding-brazing of TC4 Titanium alloy and 304 stainless steel with Cu-base filler metal. J Mater Res Technol. 2020;9(1):465–477.
   Google Scholar