144
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Dynamic compression behaviour and microstructural evolution of the Mg–6Zn–2Ce–0.6Zr alloy

, , , , , & show all
Pages 1289-1303 | Received 15 Jul 2022, Accepted 30 Dec 2022, Published online: 09 Jan 2023

References

  • You SH, Huang YD, Kainer KU, et al. Recent research and developments on wrought magnesium alloys. J Magnes Alloys. 2017;5(3):239–253.
  • Zeng ZR, Stanford N, Davies CHJ, et al. Magnesium extrusion alloys: a review of developments and prospects. Int Mater Rev. 2019;64(1):27–62.
  • Zhou H, Wang QD, Ye B, et al. Hot deformation and processing maps of as-extruded Mg-9.8Gd-2.7Y-0.4Zr Mg alloy. Mater Sci Eng A. 2013;576:101–107.
  • Feng F, Huang SY, Meng ZH, et al. Experimental study on tensile property of AZ31B magnesium alloy at different high strain rates and temperatures. Mater Des. 2014;57:10–20.
  • Li QZ. Mechanical properties and microscopic deformation mechanism of polycrystalline magnesium under high-strain-rate loadings. Mater Sci Eng A. 2012;540:130–134.
  • Zhang WG, Liu S, Li K, et al. High strain-rate behavior and deformation mechanism of a multi-layer composite textured AZ31B Mg alloy plate. J Alloy Compd. 2018;749:27–39.
  • Watanabe H, Mukai T, Ishikawa K, et al. Realization of high–strain–rate superplasticity at low temperatures in a Mg–Zn–Zr alloy. Mater Sci Eng A. 2001;307(1–2):119–128.
  • Zareian Z, Emamy M, Malekan M, et al. Tailoring the mechanical properties of Mg–Zn magnesium alloy by calcium addition and hot extrusion process. Mater Sci Eng A. 2020;774:138929.
  • Liu ZY, Duan AJ, Hou YH, et al. Microstructural evolution and flow behaviour during hot compression of twin roll cast ZK60 magnesium alloy. Mater Sci Technol. 2010;26:1429–1438.
  • Tan CL, Zhu HM, Kuang T, et al. Laser cladding Al-based amorphous-nanocrystalline composite coatings on AZ80 magnesium alloy under water cooling condition. J Alloy Compd. 2017;690:108–115.
  • He YB, Pan QL, Chen Q, et al. Modeling of strain hardening and dynamic recrystallization of ZK60 magnesium alloy during hot deformation. Trans Nonferrous Met Soc China. 2012;22(2):246–254.
  • Zhu B, Liu X, Xie C, et al. The flow behavior in as–extruded AZ31 magnesium alloy under impact loading. J Magnes Alloys. 2018;6(2):180–188.
  • Liu SM, Hui D, Chai LJ, et al. On the microstructure and mechanical property of as-extruded Mg-Gd-Y-Zn alloy with Sr addition. Mater Sci Eng A. 2016;679:183–192.
  • Ashrafizadeh SM, Mahmudi R, Geranmayeh AR. A comparative study on the effects of Gd, Y and La rare-earth elements on the microstructure and creep behavior of AZ81 Mg alloy. Mater Sci Eng A. 2020;790:139712.
  • Yu H, Kim YM, You B, et al. Effects of cerium addition on the microstructure, mechanical properties and hot workability of ZK60 alloy. Mater Sci Eng A. 2013;559:798–807.
  • Huang Z, Qi W, Xu J. Effects of Gd on microstructure and mechanical property of ZK60 magnesium alloy. Trans Nonferrous Met Soc China. 2013;23(9):2568–2576.
  • Wang Z, Yao S, Cao G S, et al. Dynamic compressive behaviour and microstructural evolution of extrusion-shear Mg–6Zn–1Cu–1Y–0.6Zr alloy. Mater Sci Technol. 2019;35(12):1515–1525.
  • Huang M, Li H, Ding L, et al. Intermetallics and phase relations of Mg-Zn-Ce alloys at 400°C. Trans Nonferrous Met Soc China. 2012;22(3):539–545.
  • Jeong HY, Kim B, Kim S, et al. Effect of Ce addition on the microstructure and tensile properties of extruded Mg-Zn-Zr alloys. Mater Sci Eng A. 2014;612:217–222.
  • Liang J, Lei Z, Chen Y, et al. Microstructure evolution of laser powder bed fusion ZK60 Mg alloy after different heat treatment. J Alloys Compd. 2022;898:163046.
  • Zhang B, Zhang Z. Influence of T5 treatment on microstructure and properties of extruded ZK60 magnesium alloy. Int J Mod Phys B. 2009;23(06n07):996–1001.
  • Asgari H, Szpunar JA, Odeshi A, et al. Effect of grain size on high strain rate deformation of rolled Mg-4Y-3RE alloy in compression. Mater Sci Eng A. 2015;633:92–102.
  • Korla R, Chokshi AH. Strain-rate sensitivity and microstructural evolution in a Mg-Al-Zn alloy. Scr Mater. 2010;63(9):913–916.
  • Jiang L, Jonas JJ, Luo AA, et al. Influence of 10–12 extension twinning on the flow behavior of AZ31 Mg alloy. Mater Sci Eng A. 2007;445–446:302–309.
  • Dixit N, Xie KY, Hemker JK, et al. Microstructural evolution of pure magnesium under high strain rate loading. Acta Mater. 2015;87:56–67.
  • Yu JC, Liu Z, Dong Y, et al. Dynamic compressive property and failure behavior of extruded Mg-Gd-Y alloy under high temperatures and high strain rates. J Magnes Alloy. 2015;3(2):134–141.
  • Lopez-Sanchez MA, Tommasi A, Barou F, et al. Dislocation-driven recrystallization in AZ31B magnesium alloy imaged by quasi-in situ EBSD in annealing experiments. Mater Charact. 2020;165:110382.
  • Kundu A, Field DP. Influence of microstructural heterogeneity and plastic strain on geometrically necessary dislocation structure evolution in single-phase and two-phase alloys. Mater Charact. 2020;170:110690.
  • Kundu A, Field DP. Geometrically necessary dislocation density evolution in interstitial free steel at small plastic strains. Metall Mater Trans A. 2018;49(8):3274–3282.
  • Wu WX, Jin L, Dong J, et al. Deformation behavior and texture evolution in an extruded Mg–1Gd alloy during uniaxial compression. Mater Sci Eng A. 2014;593:48–54.
  • Zhang XY, Li B, Liu Q. Non-equilibrium basal stacking faults in hexagonal close-packed metals. Acta Mater. 2015;90:140–150.
  • Shi XY, Liu Y, Lu J, et al. Formation of a new incoherent twin boundary in a Mg–3Gd alloy. Scr Mater. 2016;112:136–139.
  • Zhang D, Jiang L, Schoenung J, et al. TEM study on relationship between stacking faults and non-basal dislocations in Mg. Philos Mag. 2015;95(34):3823–3844.
  • Zhang C, Li Z, Ye Y, et al. Interaction of nanoparticles and dislocations with Mg17Al12 precipitates in n-SiCp/AZ91D magnesium matrix nanocomposites. J Alloy Compd. 2020;815:152416.
  • Chen H, Yu H, Kang SB, et al. Optimization of annealing treatment parameters in a twin roll cast and warm rolled ZK60 alloy sheet. Mater Sci Eng A. 2010;527(4–5):1236–1242.
  • Agnew S, Whittington W, Oppedal A, et al. Dynamic behavior of a rare-earth containing Mg alloy, WE43BT5, plate with comparison to conventional alloy, AM30-F. JOM. 2014;66(2):277–290.
  • Wang Z, Cao G S, Yao S, et al. Dynamic compressive behavior and microstructural evolution of extrusion-shear deformed ZC61 alloy. Mater Sci Technol. 2020;36(11):1148–1161.
  • Song WQ, Beggs P, Easton M. Compressive strain-rate sensitivity of magnesium-aluminum die casting alloys. Mater Des. 2009;30(3):642–648.
  • Agnew S, Duygulu Ö. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B. Int J Plast. 2005;21(6):1161–1193.
  • Zhu G, Wang L, Zhou H, et al. Improving ductility of a Mg alloy via non-basal slip induced by Ca addition. Int J Plast. 2019;120:164–179.
  • Xia D, Chen X, Huang G, et al. Calculation of Schmid factor in Mg alloys: influence of stress state. Scr Mater. 2019;171:31–35.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.