References
- Zhang J, Li S, Yang Z, et al. Influence of inclusion size on fatigue behavior of high strength steels in the gigacycle fatigue regime. Int J Fatigue. 2007;29:765–771.
- Sakai T, Oguma N, Morikawa A. Microscopic and nanoscopic observations of metallurgical structures around inclusions at interior crack initiation site for a bearing steel in very high-cycle fatigue fatigue. Fract Eng Mater Struct. 2015;38:1305–1314.
- Paris P, Marines-Garcia I, Hertzberg R, Donald J. The relationship of effective stress intensity, elastic modulus and Burgers-vector on fatigue crack growth as associated with ‘fish eye’ gigacycle fatigue phenomena. Proceedings of the international conference on very high cycle fatigue III; 2004; Kyoto, Japan.
- Hong Y, Lei Z, Sun C, et al. Propensities of crack interior initiation and early growth for very-high-cycle fatigue of high strength steels. Int J Fatigue. 2014;58:144–151.
- Su H, Liu X, Sun C, et al. Nanograin layer formation at crack initiation region for very-high-cycle fatigue of a Ti-6Al-4 V alloy. Fatigue Fract Eng Mater Struct. 2017;40:979–999.
- Nakasone Y, Hara H. FEM simulation of growth of fish-eye cracks in the very high cycle fatigue of a high strength steel SUJ2. In: Proceedings of the international conference on very high cycle fatigue III; 2004; Kyoto, Japan.
- Wagner D, Ranc N, and Bathias C. Study of fatigue crack growth in gigacycle fatigue domain by thermal analysis during the tests. Proceedings of very high cycle fatigue IV, 2007; Warrendale, USA.
- Murakami Y. Analysis of stress intensity factors of modes I, II and III for inclined cracks of arbitrary shape. Eng Fract Mech. 1985;22:101–114.
- Sun C, Lei Z, Xie J, et al. Effects of inclusion size and stress ratio on fatigue strength for high-strength steels with fish-eye mode failure. Int J Fatigue. 2013;48:19–27.
- Lai J, Lund T, Rydén K, et al. The fatigue limit of bearing steels-part I: A pragmatic approach to predict very high cycle fatigue strength. Int J Fatigue. 2012;37:155–168.
- Sun C, Xie J, Zhao A, et al. A cumulative damage model for fatigue life estimation of high-strength steels in high-cycle and very-high-cycle fatigue regimes. Fatigue Fract Eng Mater Struct. 2012;35:638–647.
- Mayer H, Haydn W, Schuller R, et al. Very high cycle fatigue properties of bainitic high carbon-chromium steel under variable amplitude loading. Int J Fatigue. 2009;31:1300–1308.
- Issler S, Bacher-Höchst M, Haydn W. Fatigue design for components under variable amplitude loading in the very high cycle fatigue area. In: 2nd international conference on material and component performance under variable amplitude loading. Berlin: DVM; 2009. p. 935–943.
- Nakajima M, Kamiya N, Itoga H, et al. Experimental estimation of crack initiation lives and fatigue limit in subsurface fracture of high carbon chromium steel. Int J Fatigue. 2006;28:1540–1546.
- Lu L, Shiozawa K. Effect of two-step load variation on giga-cycle fatigue and internal crack growth behaviour of high carbon-chromium bearing steel. In: Sakai T, Ochi Y, editors. Proc of VHCF3. Japan: Society of Material Science; 2004. p. 185–192.
- Mayer H, Fitzka M, Schuller R. Ultrasonic fatigue testing of 2024-T351 aluminum alloy at different load ratios under constant and variable amplitude. In: Berger C, Christ H-J, editors. Proc of VHCF5. Berlin: DVM; 2011. p. 355–360.
- Navaei AE, Aghazadeh MJ. Fatigue damage accumulation in cold-drawn patented steel wire under variable loading. Mater Design. 2010;31:2018–2024.
- Marco SM, Starkey WL. A concept of fatigue damage. Trans ASME. 1954;76:627–632.
- Freudenthal AM, Heller RA. On stress interaction in fatigue and cumulative damage rule. J Aerospace Sci. 1959;26:431–442.
- Ziha K. Fatigue yield. Int J Fatigue. 2009;31:1211–1214.
- Liu Y, Mahadevan S. Stochastic fatigue damage modeling under variable amplitude loading. Int J Fatigue. 2007;29:1149–1161.
- Line K, Mcdaniels R, Pulikollu R, Tryon R. Crack nucleation prediction through surface roughness measurement phase I. VEXTEC Corporation; 2008. (Final Report).
- Nehila A, Li W, Zhao H. Interior failure mechanism and life prediction of surface-treated 17CrNi steel under high and very high cycle fatigue. Fatigue Fract Eng Mater Struct. 2018;41:1–12.
- Deng H, Li W, Zhao H. Multiple fatigue failure behaviors and long-life prediction approach of carburized Cr-Ni steel with variable stress ratio. Materials. 2017;10:1084–1105.
- Liu P, Li W, Nehila A, et al. High cycle fatigue property of carburized 20Cr gear steel under axial loading. Metals (Basel). 2016;6:246–260.
- Mayer H, Haydn W, Schuller R, et al. Very high cycle fatigue properties of bainitic high carbon-chromium steel under variable amplitude conditions. Int J Fatigue. 2009;31:1300–1308.
- Nehila A, Li W, Gao N, et al. Very high cycle fatigue of surface carburized CrNi steel at variable stress ratio: failure analysis and life prediction. Int J Fatigue. 2018;111:112–123.
- Miner MA. Cumulative damage in fatigue. J Appl Mech. 1945;12:159–164.
- Gao H, Huang H-Z, Zhu S-P, et al. A modified nonlinear damage accumulation model for fatigue life prediction considering load interaction effects. Sci World J. 2014;2014:164378.
- Manson SS, Halford GR. Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damage. Int J Fract. 1981;17:169–192.
- Corten HT. Fracture mechanics of composites. Amsterdam: Elsevier Inc; 1972.