References
- Zhang C, Chen C, Liu X, et al. High strength and high electrical conductivity in Cu–Fe alloys with nano and micro Fe particles. Mater Sci Eng, A. 2022;855:143948.
- Ren L, Zhang S, Shi J, et al. Grain refinement and mechanical properties enhancement of Cu-10 wt%Fe alloys via Zr addition. Mater Sci Eng, A. 2022;846:143309.
- Zhang J, Hao W, Lin J, et al. Effects of carbon element on the formed microstructure in undercooled Cu–Fe–C alloys. J Alloys Compd. 2020;827:154285.
- Nakagawa Y. Liquid immiscibility in copper-iron and copper-cobalt systems in the supercooled state. Acta Metall. 1958;6(11):704–711.
- Moon H-J, Yeo T-m, Lee SH, et al. Effect of Zr addition on metastable liquid-liquid phase separation of Cu-Fe alloys. Scr Mater. 2021;205:114218.
- Gao H, Jun Wang DS, Sun B. Effect of Ag on the microstructure and properties of Cu–Fe in situ composites. Scr Mater. 2005;53(10):1105–1109.
- Liu KM, Lu DP, Zhou HT, et al. Effect of Ag micro-alloying on the microstructure and properties of Cu-14Fe in situ composite. Mater Sci Eng, A. 2010;527(18-19):4953–4958.
- Zhang P, Lei Q, Yuan X, et al. Microstructure and mechanical properties of a Cu-Fe-Nb alloy with a high product of the strength times the elongation. Mater Today Commun. 2020;25:101353.
- Gao H, Wang J, Sun B. Effect of Ag on the thermal stability of deformation processed Cu–Fe in situ composites. J Alloys Compd. 2009;469(1–2):580–586.
- Pang Y, Chao G, Luan T, et al. Microstructure and properties of high strength, high conductivity and magnetic Cu–10Fe-0.4Si alloy. Mater Sci Eng, A. 2021;826:142012.
- Yuan D, Zeng H, Xiao X, et al. Effect of Mg addition on Fe phase morphology, distribution and aging kinetics of Cu-6.5Fe alloy. Mater Sci Eng, A. 2021;812:141064.
- Hua S, Zhang P, Liu Z, et al. Hot deformation behavior of Cu–Sn–La polycrystalline alloy prepared by upcasting. Materials 2020;13:3739.
- Wu T, Yuan D, Huang H, et al. Enhanced mechanical strength of Cu–Sn alloy by Mg addition. Mater Res Express. 2021;8:016541.
- Luo Z, Luo F, Xie W, et al. A study on annealing-induced softening in cold drawn Cu-Cr-Sn alloy[J]. Materialwiss Werkstofftech. 2018;49:1325–1334.
- Li J, Ding H, Li B, et al. Effect of Cr and Sn additions on microstructure, mechanical-electrical properties and softening resistance of Cu–Cr–Sn alloy. Mater Sci Eng, A. 2021;802:140628.
- Wang Y, Gao H, Han Y, et al. First-principles study on the solubility of iron in dilute Cu-Fe-X alloys, J. J Alloys Compd. 2017;691:992–996.
- Wan Y, Li M, Gao H, et al. First-Principles study on the Cu/Fe interface properties of T ernary Cu-Fe-X alloys. Materials 2020;13:3112.
- Yuan D, Xiao X, Luo X, et al. Effect of multi-stage thermomechanical treatment on Fe phase evolution and properties of Cu-6.5Fe-0.3Mg alloy. Mater Charact. 2022;185:111707.
- Yuan D, Chen J, Xiao X, et al. Microstructure and properties of Cu-Fe-Cr-Ag alloy prepared by directional solidification and upward continuous casting. Metall Mater Trans A. 2021;52:2489–2500.
- Timberg L, Toguri JM, Azakami T. A thermodynamic study of copper-iron and copper-cobalt liquid alloys by mass spectrometry. Metall Trans B. 1981;12:275–279.
- Miettinen J. Thermodynamic description of the Cu–Fe–Sn system at the Cu–Fe side. Calphad. 2008;32(3):500–505.
- Hari Kumar KC, Wollants P, Delaey L. Thermodynamic evaluation of Fe-Sn phase diagram. Calphad. 1996;20(2):139–149.
- Shi RP, Wang CP, Wheeler D, et al. Formation mechanisms of self-organized core/shell and core/shell/corona microstructures in liquid droplets of immisciblealloys. Acta Mater. 2013;61:1229–1243.
- Liua S, Xua S, Jieb J, et al. Microstructure evolution and magnetic properties of metastable immiscible Cu-Fe alloy with micro-alloying B element. J Alloys Compd. 2021;888:161627.
- Peng LJ, Xie HF, Huang GJ, et al. Dynamics of phase transformation in Cu-Cr-Zr alloy. Adv Mat Res. 2014;887-888:333–337.
- Batra IS, Dey GK, kulkarni UD, et al. Precipitation in a Cu-Cr-Zr alloy. Mater Sci Eng, A. 2003;356(1–2):32–36.
- Cahn JW. The kinetics of grain boundary nucleated reactions. Acta Metall. 1956;4(5):449–459.
- Rafiei M, Mirzadeh H, Malekan M. Micro-mechanisms and precipitation kinetics of delta (δ) phase in inconel 718 superalloy during aging. J Alloys Compd. 2019;795:207–212.
- Yang F, Dong L, Zhou L, et al. Excellent strength and electrical conductivity achieved by optimizing the dual-phase structure in Cu–Fe wires. Mater Sci Eng, A. 2022;849:143484.
- Chatterjee A, Sprague E, Mazumder J, et al. Hierarchical microstructures and deformation behavior of laser direct-metal-deposited Cu–Fe alloys. Mater Sci Eng, A. 2021;802:140659.
- Yang F, Dong LM, Hu XJ, et al. Effect of solution treatment temperature upon the microstructure and mechanical properties of hot rolled inconel 625 alloy. J Mater Sci. 2020;55:1–23.
- Yang H, Bu Y, Wu J, et al. High strength, high conductivity and good softening resistance Cu-Fe-Ti alloy. J Alloys Compd. 2022;925:166595.
- Feng H, Fang F, Zhou X, et al. Heavily cold drawn iron wires: role of nano-lamellae in enhancing the tensile strength. Mater Sci Eng, A. 2020;796:140017.
- Yuan D, Xiao X, Chen J, et al. Influence of Ag addition on the microstructure and properties of Cu-6.5Fe-0.2Cr alloy prepared by upward continuous casting. J Alloys Compd. 2021;887:161458.
- Wang M, Zhang R, Xiao Z, et al. Microstructure and properties of Cu-10 wt%Fe alloy produced by double melt mixed casting and multi-stage thermomechanical treatment. J Alloys Compd. 2020;820:153323.