Properties of Mg laser alloyed with Al or AlSi20

References

• J. E. Gray and B. Luan: ‘Protective coatings on magnesium and its alloys – a critical review’, J. Alloys Compd., 2002, 336, 88–113. doi: 10.1016/S0925-8388(01)01899-0
   Web of Science ®Google Scholar
• C. J. Chen, D. S. Wang, M. C. Wang, Y. M. Liu and R. Jin: ‘High energy microarc alloying on ZM2 Mg base alloy by ZM2 alloy’, Surf. Eng., 2007, 23, (5), 344–349. doi: 10.1179/174329407X238875
   Web of Science ®Google Scholar
• C. Zhong, F. Liu, Y. Wu, J. Le, L. Liu, M. He, J. Zhu and W. Hu: ‘Protective diffusion coatings on magnesium alloys: a review of recent developments’, J. Alloys Compd., 2012, 520, 11–21. doi: 10.1016/j.jallcom.2011.12.124
   Web of Science ®Google Scholar
• R. Mola: ‘Fabrication and microstructural characterization of Al/Zn-enriched layers on pure magnesium’, Mater. Charac., 2013, 78, 121–128. doi: 10.1016/j.matchar.2013.02.004
   Web of Science ®Google Scholar
• R. Mola and K. Jagielska-Wiaderek: ‘Formation of Al-enriched surface layers through reaction at the Mg-substrate/Al-powder interface’, Surf. Interface Anal., 2014, 46, (8), 577–580. doi: 10.1002/sia.5579
   Web of Science ®Google Scholar
• U. Mayayoğlu and K. C. Tekin: ‘Wear behaviour of plasma electrolytic oxide coatings on E21 and WE43 Mg alloys’, Surf. Eng., 2015, 31, (7), 526–533. doi: 10.1179/1743294414Y.0000000409
   Web of Science ®Google Scholar
• R. K. Singh Raman, S. Murray and M. Brandt: ‘Laser assisted modification of surface microstructure for localized corrosion resistance of magnesium alloys’, Surf. Eng., 2007, 23, (2), 107–111. doi: 10.1179/174329407X169511
   Web of Science ®Google Scholar
• R. G. Li, J. An and Y. Lu: ‘Friction and wear characteristic of Mg-11Y-2.5Zn magnesium alloy treated by laser surface melting’, Surf. Eng., 2010, 26, (5), 347–353. doi: 10.1179/174329409X379255
   Web of Science ®Google Scholar
• C. Taltavull, B. Torres, A. J. Lopez, P. Rodrigo, E. Otero, A. Atrens and J. Rams: ‘Corrosion behaviour of laser surface melted magnesium alloy AZ91D’, Mater. Des., 2014, 57, 40–50. doi: 10.1016/j.matdes.2013.12.069
   Web of Science ®Google Scholar
• C. Liu, J. Liang, J. Zhou, L. Wang and Q. Li: ‘Effect of laser surface melting on microstructure and corrosion characteristic of AM60B magnesium alloy’, Appl. Surf. Sci., 2015, 343, 133–140. doi: 10.1016/j.apsusc.2015.03.067
   Web of Science ®Google Scholar
• A. Singh and S. P. Harimkar: ‘Laser surface engineering of magnesium alloys: a review’, JOM, 2012, 64, (6), 716–733. doi: 10.1007/s11837-012-0340-2
   Web of Science ®Google Scholar
• S. Ignat, P. Sallamand, D. Grevey and M. Lambertin: ‘Magnesium alloys laser (Nd:YAG) cladding and alloying with side injection of aluminium powder’, Appl. Surf. Sci., 2004, 225, 124–134. doi: 10.1016/j.apsusc.2003.09.043
   Web of Science ®Google Scholar
• S. R. Paital, A. Bhattacharya, M. Moncayo, Y. H. Ho, K. Mahdak, S. Nag, R. Banerjee and N. B. Dahotre: ‘Improved corrosion and wear resistance of Mg alloys via laser surface modification of Al on AZ31B’, Surf. Coat. Technol., 2012, 206, 2308–2315. doi: 10.1016/j.surfcoat.2011.10.009
   Web of Science ®Google Scholar
• P. Lin, Z. Zhang and L. Ren: ‘The mechanical properties and microstructure of AZ91D magnesium alloy processed by selective laser cladding with Al powder’, Opt. Laser Technol., 2014, 60, 61–68. doi: 10.1016/j.optlastec.2013.12.024
   Web of Science ®Google Scholar
• J. D. Majumdar and I. Manna: ‘Mechanical properties a laser-surface-alloyed magnesium-based alloy (AZ91) with nickel’, Scr. Mater., 2010, 62, 579–581. doi: 10.1016/j.scriptamat.2009.12.047
   Web of Science ®Google Scholar
• Y. Gao, C. Wang, Q. Lin, H. Liu and M. Yao: ‘Broad-beam laser cladding of Al–Si alloy coating on AZ91HP magnesium alloy’, Surf. Coat. Technol., 2006, 201, 2701–2706. doi: 10.1016/j.surfcoat.2006.05.011
   Web of Science ®Google Scholar
• V. Volovitch, J. E. Masse, A. Fabre, L. Barrallier and W. Saikaly: ‘Microstructure and corrosion resistance of magnesium alloy ZE41 with laser surface cladding by Al–Si powder’, Surf. Coat. Technol., 2008, 202, 4901–4914. doi: 10.1016/j.surfcoat.2008.04.052
   Web of Science ®Google Scholar
• Y. Yang and H. Wu: ‘Improving the wear resistance of AZ91D magnesium alloys by laser cladding with Al–Si powders’, Mater. Lett., 2009, 63, 19–21. doi: 10.1016/j.matlet.2008.08.026
   Web of Science ®Google Scholar
• B. Carcel, J. Sampedro, A. Ruescas and X. Toneu: ‘Corrosion and wear resistance improvement of magnesium alloys by laser cladding with Al–Si’, Phys. Procedia, 2011, 12, 353–363. doi: 10.1016/j.phpro.2011.03.045
   Google Scholar
• M. Qian, D. Li, S. B. Liu and S. L. Gong: ‘Corrosion performance of laser-remelted Al–Si coating on magnesium alloy AZ91D’, Corros. Sci., 2010, 52, 3554–3560. doi: 10.1016/j.corsci.2010.07.010
   Web of Science ®Google Scholar
• Y. Gao, C. Wang, H. Pang, H. Liu and M. Yao: ‘Broad-beam laser cladding of Al–Cu alloy coating on AZ91HP magnesium alloy’, Appl. Surf. Sci., 2007, 253, 4917–4922. doi: 10.1016/j.apsusc.2006.10.075
   Web of Science ®Google Scholar
• U. Kutschera and R. Galun: ‘Wear behavior of laser surface treated magnesium alloys’ in ‘Magnesium alloys and their application’, (ed. K.U. Kainer), 330–335, 2000, Weinheim, FRG: Wiley-Vch Verlag GmbH & Co. KGaA.
   Google Scholar
• G. Buza, V. Janó, M. Svéda, O. Verezub, Z. Kálazi, G. Kaptay and A. Roósz: ‘On the possible mechanisms of porosity formation during laser melt injection (LMI) technology’, Mater. Sci. Forum, 2008, 589, 79–84. doi: 10.4028/www.scientific.net/MSF.589.79
   Google Scholar
• Phase Equilibria Crystallographic and Thermodynamic Data of Binary Alloys, Landolt-Börstein, New Series IV, 5, Springer 1998.
   Google Scholar
• V. Raghavan: ‘Al–Mg–Si (aluminium–magnesium–silicon)’, J.Phase Equilib. Diff., 2007, 28, (2), 189–191. doi: 10.1007/s11669-007-9027-8
   Web of Science ®Google Scholar
• R. Mola: ‘Fabrication and microstructure of diffusion alloyed layers on pure magnesium substrate’, Arch. Metall. Mater., 2014, 59, (4), 1409–1412.
   Web of Science ®Google Scholar
• O. Lunder, J. E. Lein, T. K. Aune and K. Nisancioglu: ‘The role of Mg17Al12 phase in the corrosion of Mg alloy AZ91’, Corrosion, 1989, 45, 741–748. doi: 10.5006/1.3585029
   Web of Science ®Google Scholar
• A. D. Südholz, N. T. Kirkland, R. G. Buchheit and N. Birbilis: ‘Electrochemical properties of intermetallic phases and common impurity elements in magnesium alloys’, Electrochem. Solid State Lett., 2011, 14, (2), C5–C7. doi: 10.1149/1.3523229
   Google Scholar
• C. Liu, H. Yang, P. Wan, K. Wang, L. Tan and K. Yang: ‘Study on biodegradation of the second phase Mg17Al12 in Mg–Al–Zn alloys: in vitro experiment and thermodynamic calculation’, Mater. Sci. Eng. C, 2014, 35, 1–7. doi: 10.1016/j.msec.2013.10.020
   PubMed Web of Science ®Google Scholar
• K. Spencer and M. X. Zhang: ‘Heat treatment of cold spray coatings to form protective intermetallic layer’, Scripta Mater., 2009, 61, 44–47. doi: 10.1016/j.scriptamat.2009.03.002
   Web of Science ®Google Scholar
• J. Hirmke, M. X. Zhang and D. H. St John: ‘Influence of chemical composition of Mg alloys on surface alloying by diffusion coating’, Metall. Mater. Trans. A, 2012, 43, 1621–1628. doi: 10.1007/s11661-011-1034-z
   Web of Science ®Google Scholar
• N. Birbilis and R. G. Buchheit: ‘Electrochemical characteristic of intermetallic phases in aluminium alloys’, J. Electrochem. Soc., 2005, 152, B140–B151. doi: 10.1149/1.1869984
   Web of Science ®Google Scholar