Hardness-load modelling applied to multilayer galvanised coatings

References

• D. Horstmann: ‘Reaction between iron and zinc’, 1978, London, Zinc Development Association.
   Google Scholar
• A. R. Marder: ‘The metallurgy of zinc-coated steel’, Prog. Mater. Sci., 2000, 45, 191–271. doi: 10.1016/S0079-6425(98)00006-1
   Web of Science ®Google Scholar
• P. Bicao, W. Jianhua, S. Xuping, L. Zhi and Y. Fucheng: ‘Effects of zinc bath temperature on the coatings of hot-dip galvanizing’, Surf. Coat. Technol., 2008, 202, 1785–1788. doi: 10.1016/j.surfcoat.2007.07.044
   Web of Science ®Google Scholar
• D. Horstmann and F. K. Peters: ‘The reaction between iron and zinc’, Proceeding of the 9th International Hot Dip Galvanization Conference, Zinc Development Association, London, 1971.
   Google Scholar
• C. E. Jordon and A. R. Marder: ‘Fe-Zn phase formation in interstitial-free steels hot-dip galvanized at 450°C: Part I 0.00 wt% Al-Zn baths’, J. Mater. Sci., 1997, 32, 5593–5602. doi: 10.1023/A:1018680625668
   Web of Science ®Google Scholar
• D. Horstmann: ‘Formation and growth of iron-zinc alloy layers’, Proceeding of the 14th International Hot Dip Galvanization Conference. Zinc Development Association, London, 1986, 1–6.
   Google Scholar
• M. Onishi, Y. Wakamatsu and H. Miura: ‘Formation and growth kinetics of intermediate phases in Fe-Zn diffusion couples’, Trans. JIM, 1974, 15, 331–336.
   Google Scholar
• G. F. Bastin, F. J. J. Van Loo and G. D. Rieck: ‘A new compound in the iron zinc system’, Zeitschrift für Metallkunde, 1977, 68, 359–361.
   Google Scholar
• G. Vourlias, N. Pistofidis, G. Stergioudis and D. Tsipas: ‘The effect of alloying elements on the Crystallization behaviour and on the properties of galvanized coatings’, Cryst. Res., 2004, 39, 23–29. doi: 10.1002/crat.200310144
   Web of Science ®Google Scholar
• A. R. B. Verma and W. J. Van Ooij: ‘High-temperature batch hot-dip galvanizing. Part 2. Comparison of coatings formed in the temperature range 520–555 °C’, Surf. Coat. Technol., 1997, 89, 143–150. doi: 10.1016/S0257-8972(96)02940-4
   Web of Science ®Google Scholar
• C. E. Jordon and A. K. Marder: ‘Morphology development in hot-dip galvanneal coatings’, Metall. Mater. Trans. A., 1994, 25, (5), 937–947. doi: 10.1007/BF02652269
   Web of Science ®Google Scholar
• K. Rahmoun, A. Iost, V. Keryvin, G. Guillemot and N. E. Chabane Sari: ‘A multilayer model for describing hardness variations of aged porous silicon low-dielectric-constant thin films’, Thin Solid Films, 2009, 518, 213–221. doi: 10.1016/j.tsf.2009.07.040
   Web of Science ®Google Scholar
• E. S. Puchi-Cabrera, M. H. Staia and A. Iost: ‘Modeling the composite hardness of multilayer coated systems’, Thin Solid Films, 2015, 578, 53–62. doi: 10.1016/j.tsf.2015.01.070
   Web of Science ®Google Scholar
• B. Jönsson and S. Hogmark: ‘Hardness measurements of thin films’, Thin Solid Films, 1984, 114, 257–269. doi: 10.1016/0040-6090(84)90123-8
   Web of Science ®Google Scholar
• H. Bückle: ‘L'essai de microdureté et ses applications’, vol. 90, Publications Scientifiques et Techniques du Ministère de l'Air, Paris, 1960.
   Google Scholar
• H. Bückle: ‘Use of the hardness test to determine other materials properties’, in ‘Science of Hardness Testing and Its Research Applications’, (edsJ. H. Westbrook and H. Conrad), Vol. 453, 1971, OH, ASM, Metals park.
   Google Scholar
• A. Iost, D. Najjar and R. Hellouin: ‘Modelling of the Vickers hardness of paint coatings deposited on metallic substrates’, Surf. Coat. Technol., 2003, 165, 126–132. doi: 10.1016/S0257-8972(02)00737-5
   Web of Science ®Google Scholar
• R. Saha and W. D. Nix: ‘Effects of the substrate on the determination of thin film mechanical properties by nanoindentation’, Acta Mater., 2002, 50, 23–38. doi: 10.1016/S1359-6454(01)00328-7
   Web of Science ®Google Scholar
• X. Chen and J. J. Vlassak: ‘Numerical study on the measurement of thin film mechanical properties by means of nanoindentation’, J. Mater. Res., 2001, 16, 2974–2982. doi: 10.1557/JMR.2001.0408
   Web of Science ®Google Scholar
• N. L. Okamoto, M. Inomoto, H. Adachi, H. Takebayashi and H. Inui: ‘Micropillar compression deformation of single crystals of the intermetallic compound ζ-FeZn13’, Acta Mater., 2014, 65, 229–239. doi: 10.1016/j.actamat.2013.10.065
   Web of Science ®Google Scholar
• N. L. Okamoto, D. Kashioka, M. Inomoto, H. Inui, H. Takebayashiand and S. Yamaguchi: ‘Compression deformability of Γ and ζ Fe–Zn intermetallics to mitigate detachment of brittle intermetallic coating of galvannealed steels’, Scripta Mater., 2013, 69, 307–310. doi: 10.1016/j.scriptamat.2013.05.003
   Web of Science ®Google Scholar
• E. Frutos, M. Multigner and J. L. González-Carrasco: ‘Novel approaches to determining residual stresses by ultramicroindentation techniques: application to sandblasted austenitic stainless steel’, Acta Mater., 2010, 58, 4191–4198. doi: 10.1016/j.actamat.2010.04.010
   Web of Science ®Google Scholar
• C. E. Keutenedjian Mady, S. A. Rodriguez, A. G. Gómez and R. M. Souza: ‘Numerical analysis of different methods to calculate residual stresses in thin films based on instrumented indentation’, J. Mater. Res., 2012, 27, 1732–1741. doi: 10.1557/jmr.2012.166
   Web of Science ®Google Scholar