Shot peening coverage effect on residual stress profile by FE random impact analysis

References

• V. Schulze: ‘Modern mechanical surface treatment, states, stability, effects’, 2006, Weinheim: WILEY-VCH.
   Google Scholar
• G. H. Farrahi, J. L. Lebrun and D. Couratin: ‘Effect of shot peening on residual stress and fatigue life of a spring steel’, Fatigue Fract. Eng. Meas., 1995, 18, (2), 211–220. doi: 10.1111/j.1460-2695.1995.tb00156.x
   Web of Science ®Google Scholar
• K. K. Liu and M. R. Hill: ‘The effects of laser peening and shot peening on fretting fatigue in Ti–6Al–4V coupons’, Tribol. Int., 2009, 42, (9), 1250–1262. doi: 10.1016/j.triboint.2009.04.005
   Web of Science ®Google Scholar
• S. M. H. Gangaraj, Y. Alvandi-Tabrizi, G. H. Farrahi, G. H. Majzoobi and H. Ghadbeigi: ‘Finite element analysis of shot-peening effect on fretting fatigue parameters’, Tribol. Int., 2011, 44, (11), 1583–1588. doi: 10.1016/j.triboint.2010.11.023
   Web of Science ®Google Scholar
• S. M. Hassani-Gangaraj, A. Moridi, M. Guagliano and A. Ghidini: ‘Nitriding duration reduction without sacrificing mechanical characteristics and fatigue behavior: The beneficial effect of surface nano-crystallization by prior severe shot peening’, Mater. Des., 2014, 55, 492–498. doi: 10.1016/j.matdes.2013.10.015
   Web of Science ®Google Scholar
• S. M. Hassani-Gangaraj, A. Moridi, M. Guagliano, A. Ghidini and M. Boniardi: ‘The effect of nitriding, severe shot peening and their combination on the fatigue behavior and micro-structure of a low-alloy steel’, Int. J. Fatigue, 2014, 62, 67–76. doi: 10.1016/j.ijfatigue.2013.04.017
   Web of Science ®Google Scholar
• S. Bagheri and M. Guagliano: ‘Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys’, Surf. Eng., 2009, 25, (1), 3–14. doi: 10.1179/026708408X334087
   Web of Science ®Google Scholar
• L. Trško, O. Boku˚vka, F. Nový and M. Guagliano: ‘Effect of severe shot peening on ultra-high-cycle fatigue of a low-alloy steel’, Mater. Des., 2014, 57, 103–113. doi: 10.1016/j.matdes.2013.12.035
   Web of Science ®Google Scholar
• O. Unal and R. Varol: ‘Surface severe plastic deformation of AISI 304 via conventional shot peening, severe shot peening and repeening’, Appl. Surf. Sci., 2015, 351, 289–295. doi: 10.1016/j.apsusc.2015.05.093
   Web of Science ®Google Scholar
• L. Zhiming, S. Laimin, Z. Shenjin, T. Zhidong and J. Yazhou: ‘Effect of high energy shot peening pressure on the stress corrosion cracking of the weld joint of 304 austenitic stainless steel’, Mater. Sci. Eng. A, 2015, 637, 170–174. doi: 10.1016/j.msea.2015.03.088
   Web of Science ®Google Scholar
• P. S. Song and C. C. Wen: ‘Crack closure and crack growth behaviour in shot peened fatigued specimen’, Eng. Fract. Mech., 1999, 63, (3), 295–304. doi: 10.1016/S0013-7944(99)00010-7
   Web of Science ®Google Scholar
• I. F. Pariente and M. Guagliano: ‘About the role of residual stresses and surface work hardening on fatigue ΔKth of a nitrided and shot peened low-alloy steel’, Surf. Coat. Technol., 2008, 202, 3072–3080. doi: 10.1016/j.surfcoat.2007.11.015
   Web of Science ®Google Scholar
• S. T. S. Al-Hassani: ‘Mechanical aspects of residual stress development in shot peening’, 1st International conference on Shot Peening (ICSP), Paris, France, 1981, 583–602.
   Google Scholar
• D. A. Hills, R. B. Waterhouse and B. Noble: ‘An analysis of shot peening’, J. Strain Anal. Eng., 1983, 18, 95–100. doi: 10.1243/03093247V182095
   Web of Science ®Google Scholar
• Y. F. Al-Obaid: ‘Shot peening mechanics: experimental and theoretical analysis’, Mech. Mater., 1995, 19, 251–260. doi: 10.1016/0167-6636(94)00036-G
   Web of Science ®Google Scholar
• K. Sherafatnia, G. H. Farrahi, A. H. Mahmoudi and A. Ghasemi: ‘Experimental measurement and analytical determination of shot peening residual stresses considering friction and real unloading behavior’, Mater. Sci. Eng. A, 2016, 657, 309–321. doi: 10.1016/j.msea.2016.01.070
   Web of Science ®Google Scholar
• K.-I. Mori, K. Osakada and N. Matsuoka: ‘Finite element analysis of peening process with plasticity deforming shot’, J. Mater. Process. Technol., 1994, 45, (1–4), 607–612. doi: 10.1016/0924-0136(94)90406-5
   Web of Science ®Google Scholar
• Y. F. Al-Obaid: ‘Three-dimensional dynamic finite element analysis for shot-peening mechanics’, Comput. Struct., 1990, 36, (4), 681–689. doi: 10.1016/0045-7949(90)90083-E
   Web of Science ®Google Scholar
• S. T. S. Al-Hassani, K. Kormi and D. C. Webb: ‘Numerical simulation of multiple shot impact’, 7th International conference on Shot Peening (ICSP), Warsaw, Poland, 1999, 217–227.
   Google Scholar
• S. A. Meguid, G. Shagal, J. C. Stranart and J. Daly: ‘Three-dimensional dynamic finite element analysis of shot-peening induced residual stresses’, Finite Elem. Anal. Des., 1999, 31, (3), 179–191. doi: 10.1016/S0168-874X(98)00057-2
   Web of Science ®Google Scholar
• B. L. Boyce, X. Chen, J. W. Hutchinson and R. O. Ritchie: ‘The residual stress state due to a spherical hard-body impact’, Mech. Mater., 2001, 33, (8), 441–454. doi: 10.1016/S0167-6636(01)00064-3
   Web of Science ®Google Scholar
• T. Hong, J. Y. Ooi and B. A. Shaw: ‘A numerical study of the residual stress pattern from single shot impacting on a metallic component’, Adv. Eng. Softw., 2008, 39, (9), 743–756. doi: 10.1016/j.advengsoft.2007.10.002
   Web of Science ®Google Scholar
• T. Hong, J. Y. Ooi and B. Shaw: ‘A numerical simulation to relate the shot peening parameters to the induced residual stresses’, Eng. Fail. Anal., 2008, 15, (8), 1097–1110. doi: 10.1016/j.engfailanal.2007.11.017
   Web of Science ®Google Scholar
• S. Rouquette, E. Rouhaud, M. François, A. Roos and J.-L. Chaboche: ‘Coupled thermo-mechanical simulations of shot impacts: Effects of the temperature on the residual stress field due to shot-peening’, J. Mater. Process. Technol., 2009, 209, (8), 3879–3886. doi: 10.1016/j.jmatprotec.2008.09.006
   Web of Science ®Google Scholar
• G. H. Majzoobi, R. Azizi and A. Alavi Nia: ‘A three-dimensional simulation of shot peening process using multiple shot impacts’, J. Mater. Process. Technol., 2005, 164–165, 1226–1234. doi: 10.1016/j.jmatprotec.2005.02.139
   Web of Science ®Google Scholar
• T. Kim, H. Lee, S. Jung and J. H. Lee: ‘A 3D FE model with plastic shot for evaluation of equi-biaxial peening residual stress due to multi-impacts’, Surf. Coat. Technol., 2012, 206, 3125–3136. doi: 10.1016/j.surfcoat.2011.12.042
   Web of Science ®Google Scholar
• T. Kim, H. Lee, H. C. Hyun and S. Jung: ‘A simple but effective FE model with plastic shot for evaluation of peening residual stress and its experimental validation’, Mater. Sci. Eng. A, 2011, 528, (18), 5945–5954. doi: 10.1016/j.msea.2011.04.012
   Web of Science ®Google Scholar
• T. Kim, H. Lee, M. Kim and S. Jung: ‘A 3D FE model for evaluation of peening residual stress under angled multi-shot impacts’, Surf. Coat. Technol., 2012, 206, (19–20), 3981–3988. doi: 10.1016/j.surfcoat.2012.03.078
   Web of Science ®Google Scholar
• M. Guagliano: ‘Relating Almen intensity to residual stresses induced by shot peening: a numerical approach’, J. Mater. Process. Technol., 2001, 110, (3), 277–286. doi: 10.1016/S0924-0136(00)00893-1
   Web of Science ®Google Scholar
• S. M. H. Gangaraj, M. Guagliano and G. H. Farrahi: ‘An approach to relate shot peening finite element simulation to the actual coverage’, Surf. Coat. Technol., 2014, 243, (0), 39–45. doi: 10.1016/j.surfcoat.2012.03.057
   Web of Science ®Google Scholar
• H. Y. Miao, S. Larose, C. Perron and M. Lévesque: ‘On the potential applications of a 3D random finite element model for the simulation of shot peening’, Adv. Eng. Softw., 2009, 40, (10), 1023–1038. doi: 10.1016/j.advengsoft.2009.03.013
   Web of Science ®Google Scholar
• M. Klemenz, V. Schulze, I. Rohr and D. Löhe: ‘Application of the FEM for the prediction of the surface layer characteristics after shot peening’, J. Mater. Process. Technol., 2009, 209, (8), 4093–4102. doi: 10.1016/j.jmatprotec.2008.10.001
   Web of Science ®Google Scholar
• S. Bagherifard, R. Ghelichi and M. Guagliano: ‘A numerical model of severe shot peening (SSP) to predict the generation of a nanostructured surface layer of material’, Surf. Coat. Technol., 2010, 204, (24), 4081–4090. doi: 10.1016/j.surfcoat.2010.05.035
   Web of Science ®Google Scholar
• G. I. Mylonas and G. Labeas: ‘Numerical modelling of shot peening process and corresponding products: Residual stress, surface roughness and cold work prediction’, Surf. Coat. Technol., 2011, 205, (19), 4480–4494. doi: 10.1016/j.surfcoat.2011.03.080
   Web of Science ®Google Scholar
• S. A. Meguid, G. Shagal and J. C. Stranart: ‘3D FE analysis of peening of strain-rate sensitive materials using multiple impingement model’, Int. J. Impact Eng., 2002, 27, (2), 119–134. doi: 10.1016/S0734-743X(01)00043-4
   Web of Science ®Google Scholar
• T. Kim, J. H. Lee, H. Lee and S.-K. Cheong: ‘An area-average approach to peening residual stress under multi-impacts using a three-dimensional symmetry-cell finite element model with plastic shots’, Mater. Des., 2010, 31, (1), 50–59. doi: 10.1016/j.matdes.2009.07.032
   Web of Science ®Google Scholar
• A. H. Mahmoudi, A. Ghasemi, G. H. Farrahi and K. Sherafatnia: ‘A comprehensive experimental and numerical study on redistribution of residual stresses by shot peening’, Mater. Des., 2016, 90, 478–487.
   Web of Science ®Google Scholar
• Abaqus Analysis User’s Manual, 2010, version 6.10.1.
   Google Scholar
• T. Kim, H. Lee, H. C. Hyun and S. Jung: ‘Effects of Rayleigh damping, friction and rate-dependency on 3D residual stress simulation of angled shot peening’, Mater. Des., 2013, 46, 26–37. doi: 10.1016/j.matdes.2012.09.030
   Web of Science ®Google Scholar
• SAE Standard J2277 Shot Peening Coverage, Developed by Surface Enhancement Committee, Publication Date: January 1, 2003.
   Google Scholar
• Abaqus Scripting User’s Manual, 2010, version 6.10.1.
   Google Scholar
• ISO4278, Geometrical product specifications (GPS) – surface texture: profile method-terms, definitions and surface texture parameters, 1st edn; 1997.
   Google Scholar