Comparison of hot corrosion behaviour of FGM and usual TBCs

References

• Z. Lu, M.-S. Kim, S.-W. Myoung, J.-H. Lee, Y.-G. Jung, I.-S. Kim and C.-Y. Jo: ‘Thermal stability and mechanical properties of thick thermal barrier coatings with vertical type cracks’, Trans. Nonferrous Met. Soc. China, 2014, 24, 29–35. doi: 10.1016/S1003-6326(14)63284-2
   Web of Science ®Google Scholar
• N. P. Padture, K. W. Schlichting, T. Bhatia, A. Ozturk, B. Cetegen, E. H. Jordan, M. Gell, S. Jiang, T. D. Xiao, P. R. Strutt, E. Garcyia, P. Miranzo and M. I. Osendi: ‘Towards durable thermal barrier coatings with novel microstructures deposited by solution-precursor plasma spray’, Acta Mater., 2001, 49, 2251–2257. doi: 10.1016/S1359-6454(01)00130-6
   Web of Science ®Google Scholar
• C. Zhou, Q. Zhang and Y. Li: ‘Thermal shock behavior of nanostructured and microstructured thermal barrier coatings on a Fe-based alloy’, Surf. Coat. Tech., 2013, 217, 70–75. doi: 10.1016/j.surfcoat.2012.11.074
   Web of Science ®Google Scholar
• A. Moridi, S. M. Hassani-Gangaraj, M. Guagliano and M. Dao: ‘Cold spray coating: review of material systems and future perspectives’, Surf. Eng., 2014, 36, (6), 369–395. doi: 10.1179/1743294414Y.0000000270
   Web of Science ®Google Scholar
• M. Pourbafrani, R. Shoja Razavi, S. R. Bakhshi, M. R. Loghman-Estarki and H. Jamali: ‘Effect of microstructure and phase of nanostructured YSZ thermal barrier coatings on its thermal shock behaviour’, Surf. Eng., 2015, 31, (1), 64–73. doi: 10.1179/1743294414Y.0000000397
   Web of Science ®Google Scholar
• S. Kumar, S. Kant, N. M. Suri and R. Verma: ‘Mullite based thermal barrier coatings and coating techniques: a review ’, IJAMAE, 2014, 1, (3), 68–73.
   Google Scholar
• G. Moskal: ‘Thermal barrier coatings. Part 1 – characteristics of microstructure and properties, generation and directions of development of bond ’, Arch. Mater. Sci., 2007, 28, 100–112.
   Google Scholar
• C. G. Levi, J. W. Hutchinson, M. H. Vidal-Sétif and C. A. Johnson: ‘Environmental degradation of thermal-barrier coatings by molten deposits’, MRS Bull., 2012, 37, (10), 932–941. doi: 10.1557/mrs.2012.230
   Web of Science ®Google Scholar
• X. I. E. Xiaoyun, G. U. O. Hongbo, G. O. N. G. Shengkai and X. U. Huibin: ‘Hot corrosion behavior of double-ceramic-layer LaTi2Al9O19/YSZ thermal barrier coatings’, Chinese J. Aeronaut., 2012, 25, (1), 137–142. doi: 10.1016/S1000-9361(11)60372-5
   Web of Science ®Google Scholar
• S. M. Hassani-Gangaraj, A. Moridi and M. Guagliano: ‘Critical review of corrosion protection by cold spray coatings’, Surf. Eng., 2015, 31, (11), 803–815. doi: 10.1179/1743294415Y.0000000018
   Web of Science ®Google Scholar
• F. Gao, Q. Yang, R. Liu and X. Huang: ‘Oxidation resistance of novel multilayer coatings for gas turbine components’, Surf. Eng., 2014, 30, (9), 624–635. doi: 10.1179/1743294414Y.0000000283
   Web of Science ®Google Scholar
• Y. Xu, Q. Miao, W. P. Liang, J. J. Yang and Z. J. Yao: ‘Interdiffusion performance and oxidation behaviours of NiCrAlY/Al coatings on γ-TiAl’, Surf. Eng., 2014, 30, (1), 64–70. doi: 10.1179/1743294413Y.0000000200
   Web of Science ®Google Scholar
• M. Rahnavard, M. J. Ostad Ahmad Ghorabi, M. Rahnein and H. Rafiee: ‘Effects of incorporation of micro and nano Al2O3 layers on thermal shock behaviour of YSZ thermal barrier coatings’, Can. Metall. Quart., 2016. doi:10.1080/00084433.2016.1196845.
   Web of Science ®Google Scholar
• B. Yildirim and F. Erdogan: ‘Edge crack problems in homogenous and functionally graded material thermal barrier coatings under uniform thermal loading ’, J. Therm. Stresses, 2004, 27, (4), 311–329. doi: 10.1080/01495730490427564
   Web of Science ®Google Scholar
• Y. D. Lee and F. Erdogan: ‘Residual thermal stresses in FGM and laminated thermal barrier coating ’, Int. J. Fract., 1995, 69, 145–165. doi: 10.1007/BF00035027
   Web of Science ®Google Scholar
• B. Saeedi, A. Sabour and A. M. Khoddami: ‘Study of microstructure and thermal shock behavior of two types of thermal barrier coatings’, Mater. Corr., 2009, 60, (9), 695–703. doi: 10.1002/maco.200905111
   Web of Science ®Google Scholar
• T. Hille, S. Turteltaub, A. Suiker: ‘Oxide growth and damage evolution in thermal barrier coatings’, Eng. Fract. Mech., 2011, 78, 2139–2152. doi: 10.1016/j.engfracmech.2011.04.003
   Web of Science ®Google Scholar
• M. R. Loghman-Estarkia, M. Nejatib, H. Edrisc, R. S. Razavia, H. Jamalia and A. H. Pakseresht: ‘Evaluation of hot corrosion behavior of plasma sprayed scandia and yttriaco-stabilized nanostructured thermal barrier coatings in the presence of molten sulfate and vanadate salt ’, J. Eur. Ceram. Soc., 2015, 35, (2), 693–702. doi: 10.1016/j.jeurceramsoc.2014.08.029
   Web of Science ®Google Scholar
• R. G. Wellman and J. R. Nicholls: ‘Erosion, corrosion and erosion–corrosion of EB PVD thermal barrier coatings’, Tribol. Int., 2008, 41, 662–657. doi: 10.1016/j.triboint.2007.10.004
   Web of Science ®Google Scholar
• S. Krämer, J. Yang, C. G. Levi and C. A. Johnson: ‘Thermochemical interaction of thermal barrier coatings with molten CaO–MgO–Al2O3–SiO2 (CMAS) deposits ’, J. Am. Ceram. Soc., 2006, 89, 3167–3175. doi: 10.1111/j.1551-2916.2006.01209.x
   Web of Science ®Google Scholar
• M. Saremi, A. Afrasiabi and A. Kobayashi: ‘Microstructural analysis of YSZ and YSZ/Al2O3 plasma sprayed thermal barrier coatings after high temperature oxidation’, Surf. Coat. Tech., 2008, 202, 3233–3238. doi: 10.1016/j.surfcoat.2007.11.029
   Web of Science ®Google Scholar
• C. Batista, A. Portinha, R. Ribeiro, V. Teixeira and C. Oliveira: ‘Evaluation of laser-glazed plasma-sprayed thermal barrier coatings under high temperature exposure to molten salts ’, Surf. Coat. Tech., 2006, 200, 6783–6791. doi: 10.1016/j.surfcoat.2005.10.011
   Web of Science ®Google Scholar
• S. Tsipas: ‘Effect of dopants on the phase stability of zirconia-based plasma sprayed thermal barrier coatings ’, J. Eur. Ceram. Soc., 2010, 30, 61–72. doi: 10.1016/j.jeurceramsoc.2009.08.008
   Web of Science ®Google Scholar
• H. Rafiee, H. Arabi and S. Rastegari: ‘Effects of temperature and Al-concentration on formation mechanism of an aluminide coating applied on superalloy IN738LC through a single step low activity gas diffusion process’, J. Alloys Compd, 2010, 505, 206–212. doi: 10.1016/j.jallcom.2010.06.030
   Web of Science ®Google Scholar
• H. Rafiee, S. Rastegari, H. Arabi and M. Mojaddami: ‘Effects of temperature and Al-concentration on formation mechanism of an aluminide coating applied on super alloy IN738LC through a single-step high activity gas diffusion process’, Iran. J. Mater. Sci. Eng., 2010, 7, 42–49.
   Google Scholar
• M. Mojaddami, S. Rastegari, H. Arabi and H. Rafiee: ‘Effect of heat treatment on coating microstructure applied by high activity diffusion process on IN738LC’, Surf. Eng., 2012, 28, (10), 772–777. doi: 10.1179/1743294412Y.0000000064
   Web of Science ®Google Scholar
• H. Rafiee, S. Rastegari and H. Arabi: ‘Formation mechanism of IDZ during coating of IN738 by single step gas phase aluminising’, Can. Metall. Quart., 2011, 50, (1), 85–90. doi: 10.1179/000844311X552359
   Web of Science ®Google Scholar