Influence of yttrium addition on reactive sputtered W–Y–N coatings

References

• A. Sivkov, I. Shanenkov, A. Pak, D. Gerasimov and Y. Shanenkova: ‘Deposition of a TiC/Ti coating with a strong substrate adhesion using a high-speed plasma jet’, Surf. Coat. Technol., 2016, 291, 1–6. doi: 10.1016/j.surfcoat.2016.02.022
   Web of Science ®Google Scholar
• L. Aissani, C. Nouveau, M. J. Walock, H. Djebaili and A. Djelloul: ‘Influence of vanadium on structure, mechanical and tribological properties of CrN coatings’, Surf. Eng., 2015, 31, (10), 779–788. doi: 10.1179/1743294415Y.0000000043
   Web of Science ®Google Scholar
• H. Zhao, Z. Ni and F. Ye: ‘Structure and mechanical properties of reactive sputtered WCN films’, Surf. Eng., 2016, 32, (4), 307–313. doi: 10.1179/1743294415Y.0000000064
   Web of Science ®Google Scholar
• C. Louro, J. C. Oliveira and A. Cavaleiro: ‘Effects of O addition on the thermal behaviour of hard W-N sputtered coatings’, Vacuum, 2009, 83, (10), 1224–1227. doi: 10.1016/j.vacuum.2009.03.015
   Web of Science ®Google Scholar
• M. T. Hosseinnejad, M. Ghoranneviss, G. R. Etaati, M. Shirazi and Z. Ghorannevis: ‘Deposition of tungsten nitride thin films by plasma focus device at different axial and angular positions’, Appl. Surf. Sci., 2011, 257, 7653–7658. doi: 10.1016/j.apsusc.2011.03.155
   Web of Science ®Google Scholar
• J. F. Yang, Y. Jiang, R. F. Yang, Y. X. Gao, X. P. Wang and Q. F. Fang: ‘Microstructure and mechanical properties of W-Ni-N coatings prepared by magnetron sputtering’, Thin Solid Films, 2014, 570, 249–255. doi: 10.1016/j.tsf.2014.05.023
   Web of Science ®Google Scholar
• L. Yu, H. Zhao and J. Xu: ‘Mechanical, tribological and corrosion performance of WBN composite films deposited by reactive magnetron sputtering’, Appl. Surf. Sci., 2014, 315, 380–386. doi: 10.1016/j.apsusc.2014.07.170
   Web of Science ®Google Scholar
• G. Gassner, P. H. Mayrhofer, K. Kutschej, C. Mitterer and M. Kathrein: ‘Magnéli phase formation of PVD Mo-N and W-N coatings’, Surf. Coat. Technol., 2006, 201, (6), 3335–3341. doi: 10.1016/j.surfcoat.2006.07.067
   Web of Science ®Google Scholar
• M. Uekubo, T. Oku, K. Nii, M. Murakami, K. Takahiro, S. Yamaguchi, T. Nakano and T. Ohta: ‘WNx diffusion barriers between Si and Cu’, Thin Solid Films, 1996, 286, 170–175. doi: 10.1016/S0040-6090(96)08553-7
   Web of Science ®Google Scholar
• M. A. Nicolet, I. Suni and M. Finetti: ‘Amorphous metallic alloys in semiconductor contact metallizations’, Solid State Technol., 1983, 26, 129–133.
   Web of Science ®Google Scholar
• H. Zhao and F. Ye: ‘Effect of Si-incorporation on the structure, mechanical, tribological and corrosion properties of WSiN coatings’, Appl. Surf. Sci., 2015, 356, 958–966. doi: 10.1016/j.apsusc.2015.08.154
   Web of Science ®Google Scholar
• J. Xu, H. Ju and L. Yu: ‘Microstructure, oxidation resistance, mechanical and tribological properties of Mo-Al-N films by reactive magnetron sputtering’, Vacuum, 2014, 103, 21–27. doi: 10.1016/j.vacuum.2013.11.013
   Web of Science ®Google Scholar
• Z. T. Wu, Z. B. Qi, D. F. Zhang and Z. C. Wang: ‘Microstructure, mechanical properties and oxidation resistance of (Zr, Hf)Nx coatings by magnetron co-sputtering’, Surf. Coat. Technol., 2015, 276, 219–227. doi: 10.1016/j.surfcoat.2015.06.071
   Web of Science ®Google Scholar
• Z. Zheng and Z. Yu: ‘Characteristics and machining applications of Ti(Y)N coatings’, Surf. Coat. Technol., 2010, 204, 4107–4113. doi: 10.1016/j.surfcoat.2010.05.041
   Web of Science ®Google Scholar
• H. Riedl, D. Holec, R. Rachbauer, P. Polcik, R. Hollerweger, J. Paulitsch and P. H. Mayrhofer: ‘Phase stability, mechanical properties and thermal stability of Y alloyed Ti-Al-N coatings’, Surf. Coat. Technol., 2013, 235, 174–180. doi: 10.1016/j.surfcoat.2013.07.030
   Web of Science ®Google Scholar
• Z. T. Wu, Z. B. Qi, F. P. Zhu, B. Liu and Z. C. Wang: ‘Influences of Y addition on mechanical properties and oxidation resistance of CrN coating’, Phys. Procedia, 2013, 50, 150–155. doi: 10.1016/j.phpro.2013.11.025
   Google Scholar
• F. Rovere, D. Music, J. M. Schneider and P. H. Mayrhofer: ‘Experimental and computational study on the effect of yttrium on the phase stability of sputtered Cr-Al-Y-N hard coatings’, Acta Mater., 2010, 58, 2708–2715. doi: 10.1016/j.actamat.2010.01.005
   Web of Science ®Google Scholar
• Z. Wu, Z. Qi, D. Zhang and Z. Wang: ‘Evolution of the microstructure and oxidation resistance in co-sputtered Zr–Y–N coatings’, Appl. Surf. Sci., 2014, 321, 268–274. doi: 10.1016/j.apsusc.2014.09.152
   Web of Science ®Google Scholar
• Z. B. Qi, F. P. Zhu, Z. T. Wu, B. Liu, Z. C. Wang, D. L. Peng and C. H. Wu: ‘Influence of yttrium addition on microstructure and mechanical properties of ZrN coatings’, Surf. Coat. Technol., 2013, 231, 102–106. doi: 10.1016/j.surfcoat.2012.01.056
   Web of Science ®Google Scholar
• H. Ju and J. Xu: ‘Microstructure, oxidation resistance, mechanical and tribological properties of Ti-Y-N films by reactive magnetron sputtering’, Surf. Coat. Technol., 2015, 283, 311–317. doi: 10.1016/j.surfcoat.2015.10.068
   Web of Science ®Google Scholar
• Z. B. Qi, Z. T. Wu and Z. C. Wang: ‘Improved hardness and oxidation resistance for CrAlN hard coatings with Y addition by magnetron co-sputtering’, Surf. Coat. Technol., 2014, 259, 146–151. doi: 10.1016/j.surfcoat.2014.02.034
   Web of Science ®Google Scholar
• F. Rovere and P. H. Mayrhofer: ‘Impact of yttrium on structure and mechanical properties of Cr-Al-N thin films’, J. Vacuum Sci. Technol. A, 2007, 25, 1336–1340. doi: 10.1116/1.2753842
   Web of Science ®Google Scholar
• W. S. Choi, S. K. Hwang and C. M. Lee: ‘Microstructure and chemical state of Ti1−xYxN film deposited by reactive magnetron sputtering’, J. Vacuum Sci. Technol. A, 2000, 18, 2914–2921. doi: 10.1116/1.1319680
   Web of Science ®Google Scholar
• D. B. Lewis, L. A. Donohue, M. Lembke, W.-D. Münz, R. Kuzel, V. Valvoda and C. J. Blomfield: ‘The influence of the yttrium content on the structure and properties of Ti1−x−y−zAlxCryYzN PVD hard coatings’, Surf. Coat. Technol., 1999, 114, 187–199. doi: 10.1016/S0257-8972(99)00047-X
   Web of Science ®Google Scholar
• J. Xu, H. Ju and L. Yu: ‘Influence of silicon content on the microstructure, mechanical and tribological properties of magnetron sputtered Ti-Mo-Si-N films’, Vacuum, 2014, 110, 47–53. doi: 10.1016/j.vacuum.2014.08.010
   Web of Science ®Google Scholar
• A. Leyland and A. Matthews: ‘On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour’, Wear, 2000, 246, 1–11. doi: 10.1016/S0043-1648(00)00488-9
   Web of Science ®Google Scholar