Synthesis and characterisation of tin sulphide thin films

References

• B. G. Jeyaprakash, R. Ashok kumar, K. Kesavan and A. Amalarani: ‘Structural and optical characterization of spray deposited SnS thin film’, J. Am. Sci., 2010, 6, (3), 22–26.
   Google Scholar
• R. Mariappan, T. Mahalingam and V. Ponnuswamy: ‘Preparation and characterization of electrodeposited SnS thin films’, Optik., 2011, 122, 2216–2219. doi: 10.1016/j.ijleo.2011.01.015
   Web of Science ®Google Scholar
• L. A. Burton, D. Colombara, R. D. Abellon, F. C. Grozema, L. M. Peter, T. J. Savenije, G. Dennnler and A. Walsh: ‘Synthesis characterization and electronic structure of single crystal SnS, Sn2S3 and SnS2’, Chem. Mater., 2013, 25, 24262–24267. doi: 10.1021/cm403046m
   Web of Science ®Google Scholar
• R. Reddy, K. T. Koteswara Reddy and N. R. W. Miles: ‘Photovoltaic properties of SnS based solar cells’, Sol. Energy Mater. Sol. Cells, 2006, 90, 3041–3046. doi: 10.1016/j.solmat.2006.06.012
   Web of Science ®Google Scholar
• A. Sánchez-Juárez, A. Tiburcio-Silver and A. Ortiz: ‘Fabrication of SnS2/SnS heterojunction thin film diodes by plasma-enhanced chemical vapor deposition’, Thin Solid Films, 2005, 480–481, 452–456. doi: 10.1016/j.tsf.2004.11.012
   Web of Science ®Google Scholar
• S. C. Ray, M. K. Karanjai and D. DasGupta: ‘Structure and photoconductive properties of dip-deposited SnS and SnS2 thin films and their conversion to tin dioxide by annealing in air’, Thin Solid Films, 1999, 350, 72–78. doi: 10.1016/S0040-6090(99)00276-X
   Web of Science ®Google Scholar
• M. M. El-Nahass, H. M. Zeyada, M. S. Aziz and N. A. El-Ghamaz: ‘Optical properties of thermally evaporated SnS thin films’, Opt. Mater., 2002, 20, 159–170. doi: 10.1016/S0925-3467(02)00030-7
   Web of Science ®Google Scholar
• A. R. Garcia-Angelmo, M. T. S. Nair and P. K. Nair: ‘Evolution of crystalline structure in SnS thin films prepared by chemical deposition’, Solid State Sci., 2014, 30, 26–35. doi: 10.1016/j.solidstatesciences.2014.02.002
   Web of Science ®Google Scholar
• X. Hu, G. Song, W. Li, Y. Peng, L. Jiang, Y. Xue, Q. Liu, Z. Chen and J. Hu: ‘Phase-controlled synthesis and photocatalytic properties of SnS, SnS2 and SnS/SnS2 heterostructure nanocrystals’, Mater. Res Bull., 2013, 48, 2325–2332. doi: 10.1016/j.materresbull.2013.02.082
   Web of Science ®Google Scholar
• N. Koteswara Reddy and K. T. Ramakrishna Reddy: ‘Electrical properties of spray pyrolytic tin sulfide films’, Solid-State Electron., 2005, 49, 902–906. doi: 10.1016/j.sse.2005.03.003
   Web of Science ®Google Scholar
• J. A. Andrade-Arvizu, M. F. García-Sánchez, M. Courel-Piedrahita, J. Santoyo-Morales, D. Jiménez-Olarte, M. Albor-Aguilera and O. Vigil-Galán: ‘Pressure induced directional transformations on close spaced vapor transport deposited SnS thin films’, Mater Des., 2016, 110, 878–887. doi: 10.1016/j.matdes.2016.08.047
   Web of Science ®Google Scholar
• Y. Gupta, P. Arun, A. A. Naudi, M. V. Walz and E. A. Albanesi: ‘Grain size and lattice parameter's influence on band gap of SnS thin nano-crystalline films’, Thin Solid Films, 2016, 612, 310–316. doi: 10.1016/j.tsf.2016.05.056
   Web of Science ®Google Scholar
• K. Vijayakumar, C. Sanjeeviraja, M. Jayachandran and L. Amalraj: ‘Characterization of Tin disulphide thin films prepared at different substrate temperature using spray pyrolysis technique’, J. Mater. Sci. Mater. Electron., 2011, 22, (8), 929–935. doi: 10.1007/s10854-010-0239-z
   Web of Science ®Google Scholar
• A. J. Clayton, S. J. C. Irvine, P. Siderfin and V. Barrioz: ‘A new approach to thin-film SnS PV using MOCVD’, J. Energy Mater., 2015, 10, 477–481.
   Google Scholar
• J. Henry, K. Mohanraj, S. Kannan, S. Barathan and G. Sivakumar: ‘Structural and optical properties of SnS nanoparticles and electron-beam evaporated SnS thin films’, J. Exp. Nanosci., 2015, 10, 78–85. doi: 10.1080/17458080.2013.788226
   Web of Science ®Google Scholar
• Y. Oda, H. Shen, L. Zhao, J. Li, M. Iwamoto and H. Lin: ‘Energetic alignment in nontoxic SnS quantum dot-sensitized solar cell employing spiro-OMeTAD as the solid-state electrolyte’, Sci. Technol. Adv. Mater., 2014, 15, 035006. doi: 10.1088/1468-6996/15/3/035006
   PubMed Web of Science ®Google Scholar
• P. Kevin, D. J. Lewis, J. Raftery, M. Azad Malik, and P. O'Brien: ‘Thin films of tin (II) sulphide (SnS) by aerosol-assisted chemical vapour deposition (AACVD) using tin (II) dithiocarbamates as single-source precursors’, J. Cryst. Growth, 2015, 415, 93–99. doi: 10.1016/j.jcrysgro.2014.07.019
   Web of Science ®Google Scholar
• G. Grace Ninan, C. Sudha Kartha and K. P. Vijayakumar: ‘Spray pyrolysed SnS thin films in n and p type: optimization of deposition process and characterization of samples’, J. Anal. Appl. Pyrol., 2016, 120, 121–125. doi: 10.1016/j.jaap.2016.04.016
   Web of Science ®Google Scholar
• O. Benhalima, F. Chouia, B. Chouial, B. Hadjoudja, S. Silini and A. Chibani: ‘Effect of iodine utilisation conditions on CSVT deposited CuInSe2 films’, Surf. Eng., 2015, 31, 752–756. doi: 10.1179/1743294415Y.0000000020
   Web of Science ®Google Scholar
• S. M. Ahmed, L. A. Latif and A. K. H. Salim: ‘The effect of substrate temperature on the optical and structural properties of tin sulfide thin films’, J. Basrah. Res. (Sciences), 2011, 37, (3A), 53–59.
   Google Scholar
• L. Amalraj, C. Sanjeeviraja and M. Jayachandran: ‘Spray pyrolysised tin disulphide thin filmand characterisation’, J. Cryst. Growth., 2002, 234, 683–689. doi: 10.1016/S0022-0248(01)01756-0
   Web of Science ®Google Scholar
• B. R. Sankapal, R. S. Mane and C. D. Lokhande: ‘Successive ionic layer adsorption and reaction (SILAR) method for the deposition of large area (∼10 cm2) tin disulfide (SnS2) thin films’, Mater. Res. Bull., 2000, 35, 2027–2035. doi: 10.1016/S0025-5408(00)00405-0
   Web of Science ®Google Scholar
• Q. Li, Y. Ding, H. Wu, X. Liu and Y. Qian: ‘Fabrication of layered nanocrystallites SnS and β-SnS2 via a mild solution route’, Mater. Res. Bull., 2002, 37, 925–932. doi: 10.1016/S0025-5408(02)00705-5
   Web of Science ®Google Scholar
• M. Messaoudi, M. S. Aida, N. Attaf, T. Bezzi, J. Bougdira and G. Medjahdi: ‘Deposition of tin(II) sulfide thin films by ultrasonic spray pyrolysis: evidence of sulfur exo-diffusion’, Mater. Sci. Semicond. Process., 2014, 17, 38–42. doi: 10.1016/j.mssp.2013.08.004
   Web of Science ®Google Scholar
• T. H. Sajeesh, K. B. Jinesh, C. Sudha Kartha and K. P. Vijayakumar: ‘Role of pH of precursor solution in taming the material properties of spray pyrolysed SnS thin films’, Appl. Surf. Sci., 2012, 258, 6870–6875. doi: 10.1016/j.apsusc.2012.03.121
   Web of Science ®Google Scholar
• S. K. Panda, A. Antonakos, E. Liarokapis, S. Bhattacharyas and S. Chaudhuri: ‘Optical properties of nanocrystalline SnS2 thin films’, Mater. Res. Bull., 2007, 42, 576–583. doi: 10.1016/j.materresbull.2006.06.028
   Web of Science ®Google Scholar
• P. Jain and P. Arun: ‘Influence of grain size on the band-gap of annealed SnS thin films’, Thin Solid Films, 2013, 548, 241–246. doi: 10.1016/j.tsf.2013.09.089
   Web of Science ®Google Scholar
• P. Prathap, N. Revathi, K. T. Ramakrishna Reddy and R. W. Miles: ‘Thickness dependence of structure and optoelectronic properties of In2O3:Mo films prepared by spray pyrolysis’, Thin Solid Films, 2009, 518, 1271–1274. doi: 10.1016/j.tsf.2009.01.188
   Web of Science ®Google Scholar
• A. Voznyi, V. Kosyak, A. Opanasyuk, N. Tirkusova, L. Grase, A. Medvids and G. Mezinskis: ‘Structural and electrical properties of SnS2 thin films’, Mater. Chem. Phys., 2016, 173, 52–61. doi: 10.1016/j.matchemphys.2016.01.036
   Web of Science ®Google Scholar
• E. Guneri, F. Gode, C. Ulutas, F. Kirmizigul, G. Altindemir and C. Gumus: ‘Properties of p-type SnS thin films prepared by chemical bath deposition’, Chalcogenide Lett., 2010, 7, 685–694.
   Web of Science ®Google Scholar
• J. Vidal, S. Lany, M. d’Avezac, A. Zunger, A. Zakutayev, J. Francis and J. Tate: ‘Band-structure, optical properties and defect physics of the photovoltaique semiconductor SnS’, Appl. Phys. Lett., 2012, 100, 032104. doi: 10.1063/1.3675880
   Web of Science ®Google Scholar
• T. H. Sajeesh, A. R. Warrier, C. Sudha Kartha and K. P. Vijayakumar: ‘Optimization of parameters of chemical spray pyrolysis technique to get n and p-type layers of SnS’, Thin Solid Films, 2010, 518, 4370–4374. doi: 10.1016/j.tsf.2010.01.040
   Web of Science ®Google Scholar