Effects of annealing on Al–Si coating synthesised by mechanical alloying

References

• Leyens C, Peters M. Titanium and titanium alloys. Cologne: Wiley-VCH; 2003.
   Google Scholar
• Biswas A, Srikant PVS, Manna I, et al. Chemical oxidation of Ti–6Al–4V for improved wear and corrosion resistance. Surf Eng. 2008;24:442–446. doi: 10.1179/174329408X286097
   Web of Science ®Google Scholar
• Li G, Qu SG, Pan YX, et al. Effects of the different frequencies and loads of ultrasonic surface rolling on surface mechanical properties and fretting wear resistance of HIP Ti–6Al–4V alloy. Appl Surf Sci. 2016;389:324–334. doi: 10.1016/j.apsusc.2016.07.120
   Web of Science ®Google Scholar
• Liu H, Zhang X, Jiang Y, et al. Microstructure and high temperature oxidation resistance of in-situ synthesized TiN/Ti3Al intermetallic composite coatings on Ti6Al4V alloy by laser cladding process. J Alloy Compd. 2016;670:268–274. doi: 10.1016/j.jallcom.2015.10.168
   Web of Science ®Google Scholar
• Qin YK, Xiong DS, Li JL, et al. Compositions and tribological properties of PEO coatings on Ti6Al4V alloy. Surf Eng. 2014. doi:10.1179/1743294414Y.0000000412.
   Web of Science ®Google Scholar
• Xiao Z, Tan F, Wang W, et al. Oxidation behaviour of glass–quartz and glass–quartz–aluminium composite coatings on Ti–6Al–4V alloy. Surf Eng. 2015;31:361–367. doi: 10.1179/1743294414Y.0000000375
   Web of Science ®Google Scholar
• Wei DB, Zhang PZ, Yao ZJ, et al. Oxidation behaviour of plasma surface alloying on Ti6Al4V alloy. Surf Eng. 2015. doi:10.1179/1743294415Y.0000000095.
   Web of Science ®Google Scholar
• Morita T, Asakura K, Kagaya C. Effect of combination treatment on wear resistance and strength of Ti–6Al–4V alloy. Mater Sci Eng A. 2014;618:438–446. doi: 10.1016/j.msea.2014.09.042
   Web of Science ®Google Scholar
• Nouri S, Rastegari S, Mirdamadi S, et al. Microstructure and oxidation resistance of Si modified aluminide coating on TiAl based alloys. Surf Eng. 2014;31:930–933. doi: 10.1179/1743294414Y.0000000411
   Web of Science ®Google Scholar
• Ei-Mahallawy NA, Taha MA, Shady MA, et al. Analysis of coating layer formed on steel strips during aluminising by hot dipping in Al–Si baths. Mater Sci Tech Lond. 1997;13:832–840. doi: 10.1179/mst.1997.13.10.832
   Google Scholar
• Xiang ZD, Rose SR, Datta PK. Diffusion coatings resistant to oxidation for γ-TiAl by pack codeposition of Al and Si. Mater Sci Tech Lond. 2003;19:1247–1252. doi: 10.1179/026708303225005908
   Web of Science ®Google Scholar
• Lin C, Wu S, Lü S, et al. Dry sliding wear behavior of rheocast hypereutectic Al–Si alloys with different Fe contents. Trans Nonferr Metal Soc. 2016;26:665–675. doi: 10.1016/S1003-6326(16)64156-0
   Web of Science ®Google Scholar
• Kang N, Coddet P, Liao H, et al. Wear behavior and microstructure of hypereutectic Al–Si alloys prepared by selective laser melting. Appl Surf Sci. 2016;378:142–149. doi: 10.1016/j.apsusc.2016.03.221
   Web of Science ®Google Scholar
• Okamoto H. Al–Ti (aluminum–titanium). J Phase Equilib. 1993;14:120–121. doi: 10.1007/BF02652171
   Google Scholar
• Da Silva Costa AM, de Lima GF, Rodrigues G, et al. Evaluation of Ti3Si phase stability from heat-treated, rapidly solidified Ti–Si alloys. J Phase Equilib Diff. 2010;31:22–27. doi: 10.1007/s11669-009-9610-2
   Web of Science ®Google Scholar
• Zuo M, Zhao DG, Wang ZQ, et al. Investigation on WC–Al composite coatings of AZ91 alloy by mechanical alloying. Mater Sci Tech Lond. 2015;31:1051–1057. doi: 10.1179/1743284714Y.0000000664
   Web of Science ®Google Scholar
• Romankov S, Park YC, Komarov SV. Formation of composite CuWNi layers on ceramic substrates under shot impact treatment. J Alloy Compd. 2016;689:777–786. doi: 10.1016/j.jallcom.2016.08.018
   Web of Science ®Google Scholar
• Zadorozhnyy VY, Kaevitser EV, Kopylov AN, et al. Synthesis of the hydroxyapatite coatings on the Ti substrates by mechanical alloying. Surf Coat Technol. 2015;281:157–163. doi: 10.1016/j.surfcoat.2015.09.056
   Web of Science ®Google Scholar
• Wismogroho AS, Widayatno WB, Suryadi KA, et al. Iron aluminide coating on Al by mechanical alloying. Surf Eng. 2011;27:126–133.
   Web of Science ®Google Scholar
• Saba F, Kabiri E, Khaki JV, et al. Fabrication of nanocrystalline TiC coating on AISI D2 steel substrate via high-energy mechanical alloying of Ti and C. Powder Technol. 2016;288:76–86. doi: 10.1016/j.powtec.2015.10.030
   Web of Science ®Google Scholar
• Żaba K. The influence of annealing temperature and time on the structure and features of the Al–Si coatings on steel sheets, purposed for pressured welded pipes applied in exhaust systems. Arch Civ Mech Eng. 2009;9:145–152. doi: 10.1016/S1644-9665(12)60065-X
   Web of Science ®Google Scholar
• Li Z, Liao C, Liu Y, et al. 700°C isothermal section of the Al–Ti–Si ternary phase diagram. J Phase Equilib Diff. 2014;35:564–574. doi: 10.1007/s11669-014-0325-7
   Web of Science ®Google Scholar
• Bulanova M, Tretyachenko L, Golovkova M, et al. Phase equilibria in the α-Ti–Al–Si region of the Ti–Si–Al system. J Phase Equilib Diff. 2004;25:209–229. doi: 10.1007/s11669-004-0110-0
   Web of Science ®Google Scholar
• Dezellus O, Gardiola B, Andrieux J, et al. On the liquid/solid phase equilibria in the Al-Rich corner of the Al–Si–Ti ternary system. J Phase Equilib Diff. 2014;35:137–145. doi: 10.1007/s11669-014-0282-1
   Web of Science ®Google Scholar
• Mirjalili M, Soltanieh M, Matsuura K, et al. TiAl3 formation in the titanium-aluminum diffusion couple. Defect Diffus Forum. 2012;322:185–194. doi: 10.4028/www.scientific.net/DDF.322.185
   Google Scholar
• Liu Y, Wu G, Xiu Z, et al. Analysis on kinetics process of Ti and Al reaction. Rare Metal Mat Eng. 2015;44:599–602.
   Web of Science ®Google Scholar
• Barin I. Thermochemical data of pure substances. 3rd ed. Weinheim, Germany: Wiley-VCH Verlag GmbH; 1995.
   Google Scholar
• Murray JL, McAlister AJ. The Al–Si (aluminum–silicon) system. Bull Alloy Phase Diagr. 1984;5:74–84. doi: 10.1007/BF02868729
   Google Scholar