Influence of CeO₂ on tribological behaviour of TiC/Fe-based composite coating

References

• Cai YC, Luo Z, Feng MN, et al. The effect of TiC/Al2O3 composite ceramic reinforcement on tribological behavior of laser cladding Ni60 alloys coatings. Surf Coat Technol. 2016;291:222–229. doi: 10.1016/j.surfcoat.2016.02.033
   Web of Science ®Google Scholar
• Masanta M, Shariff SM, Choudhury AR. Microstructure and properties of TiB2-TiC-Al2O3 coating prepared by laser assisted SHS and subsequent cladding with micro-/nano-TiO2 as precursor constituent. Mater Design. 2016;90:307–317. doi: 10.1016/j.matdes.2015.10.135
   Web of Science ®Google Scholar
• Wu Q, Zhong N, Liu B, et al. Microstructure and corrosion behaviour of laser-clad TiC-Cr7C3-CNTs cermet coating on 304 stainless steel substrate. Corros Eng Sci Technol. 2016;51(2):136–145. doi: 10.1179/1743278215Y.0000000039
   Web of Science ®Google Scholar
• Man HC, Zhang S, Cheng FT, et al. Microstructure and formation mechanism of in situ synthesized TiC/Ti surface MMC on Ti-6Al-4V by laser cladding. Scripta Mater. 2001;44:2801–2807. doi: 10.1016/S1359-6462(01)00977-0
   Web of Science ®Google Scholar
• Farokhian GH, Salehnasab B, Zat Ajam H, Nahidi H. Influence of WC–20Co–1Ni coating by HVOF on lifespan of the downhole drilling motors. Surf Eng. DOI:10.1080/02670844.2017.1278643.
   Google Scholar
• Keyvani A, Bahamirian M. Hot corrosion and mechanical properties of nanostructured Al2O3/CSZ composite TBCs. Surf Eng. DOI:10.1080/02670844.2016.1267423.
   Web of Science ®Google Scholar
• Bai LL, Li J, Chen JL, et al. Effect of the content of B4C on microstructural evolution and wear behaviors of the laser-clad coatings fabricated on Ti6Al4V. Opt Laser Technol. 2016;76:33–45. doi: 10.1016/j.optlastec.2015.07.010
   Web of Science ®Google Scholar
• Song R, Li J, Shao JZ, et al. Microstructural evolution and wear behaviors of laser cladding Ti2Ni/alpha(Ti) dual-phase coating reinforced by TiB and TiC. Appl Surf Sci. 2015;355:298–309. doi: 10.1016/j.apsusc.2015.07.131
   Web of Science ®Google Scholar
• He L, Tan YF, Wang XL, et al. Tribological properties of laser cladding TiB2 particles reinforced Ni-base alloy composite coatings on aluminum alloy. Rare Metals. 2015;34(11):789–796. doi: 10.1007/s12598-014-0299-y
   Web of Science ®Google Scholar
• Fernandez MR, Garcia A, Cuetos JM, et al. Effect of actual WC content on the reciprocating wear of a laser cladding NiCrBSi alloy reinforced with WC. Wear. 2014;324:80–89.
   Web of Science ®Google Scholar
• Weng F, Yu HJ, Chen CZ, et al. Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y2O3 by laser cladding on Ti-6Al-4V alloy. J Alloy Compd. 2015;650:178–184. doi: 10.1016/j.jallcom.2015.07.295
   Web of Science ®Google Scholar
• Zhang H, Zou Y, Zou ZD, et al. Microstructures and properties of low-chromium high corrosion-resistant TiC-VC reinforced Fe-based laser cladding layer. J Alloy Compd. 2015;622:62–68. doi: 10.1016/j.jallcom.2014.10.012
   Web of Science ®Google Scholar
• Li JN, Chen CZ, Zhang CF. Effect of Al2O3-CeO2 on microstructure characteristics of SiC-TiB2-TiC reinforced composite coating. Mater Res Innov. 2012;16(1):56–60. doi: 10.1179/1433075X11Y.0000000014
   Web of Science ®Google Scholar
• Tan H, Luo Z, Li Y, et al. Microstructure and wear resistance of Al2O3-M7C3/Fe composite coatings produced by laser controlled reactive synthesis. Opt Laser Technol. 2015;68:11–17. doi: 10.1016/j.optlastec.2014.11.006
   Web of Science ®Google Scholar
• Tan H, Luo Z, Li Y, et al. Effect of strengthening particles on the dry sliding wear behavior of Al2O3-M7C3/Fe metal matrix composite coatings produced by laser cladding. Wear. 2015;324–325:36–44. doi: 10.1016/j.wear.2014.11.023
   Web of Science ®Google Scholar
• Cai YC, Liu RP, Wei YH, et al. Influence of Y on microstructures and mechanical properties of high strength steel weld metal. Mater Design. 2014;62:83–90. doi: 10.1016/j.matdes.2014.02.057
   Web of Science ®Google Scholar
• Lei YW, Sun RL, Tang Y, et al. Experimental and thermodynamic analysis of laser clad Cr3C2/Ni coatings on a Ti6Al4V substrate produced with different incident laser powers. Laser Eng. 2015;32(3–4):207–220.
   Web of Science ®Google Scholar
• Li QT, Lei YP, Fu HG. Growth mechanism, distribution characteristics and reinforcing behavior of (Ti, Nb)C particle in laser cladded Fe-based composite coating. Appl Surf Sci. 2014;316:610–616. doi: 10.1016/j.apsusc.2014.08.052
   Web of Science ®Google Scholar
• Sun RL, Mao JF, Yang DZ. Microscopic morphology and distribution of TiC phase in laser clad NiCrBSiC-TiC layer on titanium alloy substrate. Surf Coat Technol. 2002;155:203–207. doi: 10.1016/S0257-8972(02)00006-3
   Web of Science ®Google Scholar
• Farahmand P, Frosell T, McGregor M, et al. Comparative study of the slurry erosion behavior of laser cladded Ni-WC coating modified by nanocrystalline WC and La2O3. Int J Adv Manuf Technol. 2015;79:1607–1621. doi: 10.1007/s00170-015-6936-2
   Web of Science ®Google Scholar
• Li QH, Savalani MM, Zhang QM, et al. High temperature wear characteristics of TiC composite coatings formed by laser cladding with CNT additives. Surf Coat Technol. 2014;239:206–211. doi: 10.1016/j.surfcoat.2013.11.043
   Web of Science ®Google Scholar