References
- Chen DQ, Liu D, Liu YF, et al. Microstructure and fretting wear resistance of gamma/TiC composite coating in situ fabricated by plasma transferred arc cladding. Surf Coat Technol. 2014;239:28–33. doi: 10.1016/j.surfcoat.2013.11.012
- Mendez PF, Barnes N, Bell K, et al. Welding processes for wear resistant overlays. J Manuf Process. 2014;16(1):4–25. doi: 10.1016/j.jmapro.2013.06.011
- Buytoz S, Orhan A, Gur AK, et al. Microstructural development of Fe-Cr-C and B4C powder alloy coating on stainless steel by plasma-transferred arc weld surfacing. Arab J Sci Eng. 2013;38(8):2197–2204. doi: 10.1007/s13369-013-0599-9
- Rokanopoulou A, Papadimitriou GD. Titanium carbide/duplex stainless steel (DSS) metal matrix composite coatings prepared by the plasma transferred arc (PTA) technique: microstructure and wear properties. J Coat Technol Res. 2011;8(3):427–437. doi: 10.1007/s11998-010-9283-0
- Bourithis L, Papadimitriou GD. The effect of microstructure and wear conditions on the wear resistance of steel metal matrix composites fabricated with PTA alloying technique. Wear. 2009;266(11–12):1155–1164. doi: 10.1016/j.wear.2009.03.032
- Yuan YL, Li ZG. Microstructure and wear performance of high volume fraction carbide M7C3 reinforced Fe-based composite coating fabricated by plasma transferred arc welding. J Wuhan Univ Technol. 2014;29(5):1028–1035. doi: 10.1007/s11595-014-1038-9
- Wang XB. The metallurgical behavior of B4C in the iron-based surfacing alloy during PTA powder surfacing. Appl Surf Sci. 2005;252(5):2021–2028. doi: 10.1016/j.apsusc.2005.03.171
- Flores JF, Neville A, Kapur N, et al. Erosion-corrosion degradation mechanisms of Fe-Cr-C and WC-Fe-Cr-C PTA overlays in concentrated slurries. Wear. 2009;267(11):1811–1820. doi: 10.1016/j.wear.2009.02.005
- Hou QY, Gao JS, Zhou F. Microstructure and wear characteristics of cobalt-based alloy deposited by plasma transferred arc weld surfacing. Surf Coat Technol. 2005;194(2–3):238–243. doi: 10.1016/j.surfcoat.2004.07.065
- Kang SH, Shinoda T, Kato Y, et al. Thermal fatigue characteristics of PTA hardfaced steels. Surf Eng. 2001;17(6):498–504. doi: 10.1179/026708401322911437
- Guo LJ, Wang XB, Zang PP, et al. In situ synthesis ZrB2/Fe cladding layer by PTA process. Surf Eng. 2012;28(10):767–771. doi: 10.1179/1743294412Y.0000000062
- Qunshuang M, Yajiang L, Juan W. Surface modification of Q550 HSLA steel with Co–Fe–Cr composite coatings manufactured by fibre laser cladding. Surf Eng. 2016;32(12):934–942. doi: 10.1080/02670844.2016.1176717
- Singh S, Kaur M. Mechanical and microstructural properties of NiCrFeSiBC/Cr3C2 composite coatings – part I. Surf Eng. 2016;32(7):464–474. doi: 10.1179/1743294414Y.0000000416
- Singh S, Kaur M. Solid particle erosion behaviour of NiCrFeSiBC/Cr3C2 composite coatings – part II. Surf Eng. 2016;32(7):475–489. doi: 10.1179/1743294414Y.0000000419
- Aruna ST, Srinivas G. Wear and corrosion resistant properties of electrodeposited Ni composite coating containing Al2O3-TiO2 composite powder. Surf Eng. 2015;31(9):708–713. doi: 10.1179/1743294415Y.0000000050
- Shi KY, Hu SB, Xu W, et al. Surface treatment of 45 steels by plasma beam alloying and plasma surface quenching. Adv Mater Res-Switz. 2010;129–131:1109–1113. doi: 10.4028/www.scientific.net/AMR.129-131.1109
- Shi KY, Hu SB, Zheng HF. On microstructure and fatigue characterisation of cast iron alloyed with PTA deposits. Surf Eng. 2012;28(2):113–121. doi: 10.1179/1743294411Y.0000000066
- Du BS, Wang XH, Zou ZD. Microstructure and tribological behavior of laser in situ synthesized TiC-reinforced Fe-based composite coatings. Tribol Lett. 2011;43(3):295–301. doi: 10.1007/s11249-011-9808-4
- Modi OP, Prasad BK, Jha AK, et al. Effects of material composition and microstructural features on dry sliding wear behaviour of Fe-TiC composite and a cobalt-based stellite. Tribol Lett. 2004;17(2):129–138. doi: 10.1023/B:TRIL.0000032437.23201.bb
- Amini K, Nategh S, Shafyei A. Influence of different cryotreatments on tribological behavior of 80CrMo12 5 cold work tool steel. Mater Design. 2010;31(10):4666–4675. doi: 10.1016/j.matdes.2010.05.028
- Senthilkumar D, Rajendran I. Optimization of deep cryogenic treatment to reduce wear loss of 4140 steel. Mater Manuf Process. 2012;27(5):567–572. doi: 10.1080/10426914.2011.593237
- Baldissera P, Delprete C. Deep cryogenic treatment: a bibliographic review. Open Mech Eng J. 2008;2:1–11. doi: 10.2174/1874155X00802010001
- Bensely A, Prabhakaran A, Lal DM, et al. Enhancing the wear resistance of case carburized steel (En 353) by cryogenic treatment. Cryogenics. 2005;45(12):747–754. doi: 10.1016/j.cryogenics.2005.10.004
- Firouzdor V, Nejati E, Khomamizadeh F. Effect of deep cryogenic treatment on wear resistance and tool life of M2 HSS drill. J Mater Process Technol. 2008;206(1–3):467–472. doi: 10.1016/j.jmatprotec.2007.12.072
- Hong C, Gu DD, Dai DH, et al. Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures. Opt Laser Technol. 2013;54:98–109. doi: 10.1016/j.optlastec.2013.05.011
- Idriss ANM, Maleque MA, Yaacob II, et al. Microstructural aspects of wear behaviour of TiC coated low alloy steel. Mater Sci Technol-Lond. 2016;32(4):303–307. doi: 10.1080/02670836.2016.1142049
- Lugscheider E, Knotek O, Bobzin K, et al. Tribological properties, phase generation and high temperature phase stability of tungsten- and vanadium-oxides deposited by reactive MSIP-PVD process for innovative lubrication applications. Surf Coat Technol. 2000;133–134:362–368. doi: 10.1016/S0257-8972(00)00963-4