References
- Yuan Z, Liang S, Zhuo L. Pre-treatment and electroless Ni-P deposition for surface-modification of tungsten fibres. Surf Eng. 2017;33(5):348–352. doi: 10.1080/02670844.2016.1235007
- Rahaman A, Kar KK. E-glass fibers coated with nickel phosphorous by electroless deposition technique. Compos Interface. 2016;23(7):689–699. doi: 10.1080/09276440.2016.1168635
- Soares ME, Soares P, Souza PR, et al. The effect of nitriding on adhesion and mechanical properties of electroless Ni-P coating on AISI 4140 steel. Surf Eng. 2017;33(2):116–121. doi: 10.1080/02670844.2016.1148831
- Farzaneh A, Ehteshamzadeh M, Cobley AJ. Modelling of surfactants and chemistry for electroless Ni-P plating. Surf Eng. 2017. doi: 10.1080/02670844.2017.1287621
- Popescu SM, Barlow AJ, Ramadan S, et al. Electroless nickel deposition: an alternative for graphene contacting. ACS Appl Mater Inter. 2016;8(45):31359–31367. doi: 10.1021/acsami.6b08290
- Ru J, Jia Y, Jiang Y, et al. Modification of ZTA particles with Ni coating by electroless deposition. Surf Eng 2017;33(5):353–361. doi: 10.1080/02670844.2016.1248119
- Li B, Li N, Li D, et al. Novel Pd-catalyzed electroless Au deposition method using a sulfite solution. RSC Adv 2016;6:34797–34800. doi: 10.1039/C5RA28168G
- Cauchy X, Klemberg-Sapieha JE, Therriault D. Synthesis of highly conductive, uniformly silver coated carbon nanofibers by electroless deposition. ACS Appl Mater Interface. 2017;9(34):29010–29020. doi: 10.1021/acsami.7b06526
- Kaniganti CM, Uppaluri R. Efficacy of reducing agent contacting pattern in Ag-SOEP electroless plating baths. Surf Eng 2017;33(5):383–388. doi: 10.1080/02670844.2016.1220755
- Qin WF. Development of metallised polyester fabric by electroless copper for aircraft application using glyoxylic acid as reductant. Trans Inst Met Finish. 2016;94(5):246–249. doi: 10.1080/00202967.2016.1163064
- Banerjee A, Dutta M, Bysakh S, et al. Role of Sn on the adhesion in Cu-Sn alloy-coated steel–rubber interface. J Adhes Sci Technol. 2014;28(11):987–1004. doi: 10.1080/01694243.2014.881617
- Faraji S, Faraji AH, Noori SR, et al. Investigation on electroless Cu-P-micro/nanoSiC composite coatings. Surf Eng. 2015;31(3):179–188. doi: 10.1179/1743294414Y.0000000334
- Mukhopadhyay A., Barman T. K. and Sahoo P.: Effect of operating temperature on tribological behavior of As-plated Ni-B coating deposited by electroless method. Tribol Trans. 2017. doi: 10.1080/10402004.2016.1271929
- Vitry V., Bonin L., Malet L. Chemical, morphological and structural characterisation of electroless duplex NiP/NiB coatings on steel. Surf Eng. 2017. doi: 10.1080/02670844.2017.1320032
- Alirezaei S, Monirvaghefi SM, Saatchi A, et al. High temperature tribology of nanocrystalline Ni-P-Ag coating. Surf Eng. 2013;29(4):306–311. doi: 10.1179/1743294412Y.0000000085
- Song GS, Sun S, Wang ZC, Luo CZ, Pan CX. Synthesis and characterization of electroless Ni-P/Ni-Mo-P duplex coating with different thickness combinations. Acta Metall Sin Engl. 2017. doi: 10.1007/s40195-017-0603-6
- Heydari H, Monirvaghefi SM, Hadipour A. Plagiarism and JMEP’s publication ethics policy. J Mater Eng Perform. 2017;26:1–10. doi: 10.1007/s11665-017-2537-6
- Hu J, Fang L, Liao XL, et al. Influences of different reinforcement particles on performances of electroless composites. Surf Eng. 2017;33(5):362–368. doi: 10.1080/02670844.2016.1230975
- Mu S, Li W, Du J. The effect of nonmetallic element P in electroless Ni-P coating on the passivation process during chemical conversion treatment. Surf Interface Anal. 2015;47:148–153. doi: 10.1002/sia.5690
- Mu S, Li W, Du J. Composition and formation analysis of an ultra-thin antitarnish passive film on electroless Ni-P coating. Electrochim Acta. 2014;125:580–585. doi: 10.1016/j.electacta.2014.01.119
- Zhang M, Mu S, Guan Q, et al. A high anticorrosive chromium-free conversion coating prepared with an alkaline conversion bath on electroless Ni-P coating. Appl Surf Sci. 2015;349:108–115. doi: 10.1016/j.apsusc.2015.04.209
- Gan Y, Chen D, Kang Z. A highly anticorrosive chromium-free conversion coating prepared on electroless Ni-P coating. Surf Coat Technol. 2016;287:25–32. doi: 10.1016/j.surfcoat.2015.12.080
- Motamedi M, Attar MM. Nanostructured vanadium-based conversion treatment of mild steel substrate: formation process via noise measurement, surface analysis and anti-corrosion behavior. RSC Adv. 2016;6:44732–44741. doi: 10.1039/C6RA06064A
- Bhagga Fazluddin S, Koursaris A, Ringas C, et al. Corrosion behavior of vanadium carbide coating produced by a thermal diffusion process. Mater Manuf Process. 1995;10(2):159–169. doi: 10.1080/10426919508935012
- Zairi A, Cheikh Larbi AB, Iost A, et al. Effect of O2 increase on properties of vanadium oxide coatings. Surf Eng. 2016;32(6):404–410. doi: 10.1179/1743294414Y.0000000444
- Sudagar J, Lian JS, Liang YQ, et al. Electroless Ni–P deposition with vanadium based coating as pretreatment on AZ91D magnesium alloy. Trans Inst Met Finish. 2012;90(3):129–136. doi: 10.1179/0020296712Z.00000000022
- Hamdy AS, Doench I, Möhwald H. The effect of alkaline etching time on the anticorrosion performance of vanadia film formed on high strength AA2024 in chloride media. J Mater Sci. 2012;47(8):3784–3792. doi: 10.1007/s10853-011-6232-y
- Iannuzzi M, Young T, Frankel GS. Aluminum alloy corrosion inhibition by vanadates. J Electrochem Soc. 2006;153(12):B533–B541. doi: 10.1149/1.2358843
- Ralston KD, Chrisanti S, Young TL, et al. Corrosion inhibition of aluminum alloy 2024-T3 by aqueous vanadium species. J Electrochem Soc. 2008;155(7):C350–C359. doi: 10.1149/1.2907772
- Zou Z, Li N, Li D. Corrosion protection properties of vanadium films formed on zinc surfaces. Rare Met. 2011;30(2):146–149. doi: 10.1007/s12598-011-0214-8
- Karthikeyan S, Vijayaraghavan L. Investigation of the surface properties of heat treated electroless Ni-P coating. Trans Inst Met Finish. 2016;94:265–273. doi: 10.1080/00202967.2016.1208861
- Fang X, Cui XF, Jin G, et al. Effect of magnetic field on brush plating Ni-Co alloy. Surf Eng. 2017;33(2):142–148. doi: 10.1080/02670844.2016.1195119
- Dey R, Bhunia R, Hussain S, et al. Room temperature magnetism in free-standing nano-Ni/PVDF composites. Polym-Plast Technol. 2017;56(11):1213–1224. doi: 10.1080/03602559.2016.1263865
- Spinner N, Mustain WE. Effect of nickel oxide synthesis conditions on its physical properties and electrocatalytic oxidation of methanol. Electrochim Acta. 2011;56:5656–5666. doi: 10.1016/j.electacta.2011.04.023
- Niu J, Dai P, Qi G, et al. Preparation of P doped TiO2 nanotubes and its photocatalytic activity. Integr Ferroelectr. 2016;176:150–159. doi: 10.1080/10584587.2016.1250601
- Lindström R., Maurice V., Zanna S., et al. Thin films of vanadium oxide grown on vanadium metal: oxidation conditions to produce V2O5 films for Li-intercalation applications and characterisation by XPS, AFM, RBS/NRA. Surf Interface Anal. 2006;38:6–18.
- Zou Z, Li N, Li D, et al. A vanadium-based conversion coating as chromate replacement for electrogalvanized steel substrates. J Alloys Compd. 2011;509:503–507. doi: 10.1016/j.jallcom.2010.09.080
- Akulich NE, Zharskii IM, Ivanova NP. A study of conversion coatings on vanadium/galvanic zinc. Prot Met Phys Chem Surf. 2017;53(3):503–510. doi: 10.1134/S2070205117020034
- Henry M, Jolivet JP, Livage J. Aqueous chemistry of metal cations: hydrolysis, condensation and complexation. Struct Bond. 1992;77:153–206. doi: 10.1007/BFb0036968