References
- Ramanauskas R, Gudavičiūtė L, Kosenko A, et al. Structural and corrosion characterisation of pulse plated Zn and Zn–Ni alloy coatings. Trans IMF. 2012;90(5):237–245. doi: 10.1179/0020296712Z.00000000045
- Feng Z, Li Q, Zhang J, et al. Electrochemical behaviors and properties of Zn-Ni alloys obtained from alkaline Non-cyanide bath using 5, 5′-dimethylhydantoin as complexing agent. Electrochem Soc. 2015;162(9):D412–D422. doi: 10.1149/2.0121509jes
- Momeni MM, Hashemizadeh S, Mirhosseini M, et al. Preparation, characterisation, hardness and antibacterial properties of Zn–Ni–TiO2 nanocomposites coatings. Surf Eng. 2016;32(7):490–494. doi: 10.1179/1743294415Y.0000000049
- Yogesha S, Bhat RS, Venkatakrishna K, et al. Development of nano-structured Zn-Ni multilayers and their corrosion behaviors. Synth React Inorg, Met-Org, Nano-Met Chem. 2011;41(1):65–71.
- Feng Z, Ren L, Zhang J, et al. Theoretical calculations and electrochemical behaviors of additives in DMH-based alkaline bath for nanocrystalline Zn-Ni electrodeposition. Electrochem Soc. 2016;163(9):D544–D553. doi: 10.1149/2.0071610jes
- Khan TR, Erbe A, Auinger M, et al. Electrodeposition of zinc–silica composite coatings: challenges in incorporating functionalized silica particles into a zinc matrix. Sci Technol Adv Mater. 2011;12(5):055005. doi: 10.1088/1468-6996/12/5/055005
- Choudhary R, Mishra P, Kain V. Pulse DC electrodeposition of Zn–Ni–Co coatings. Surf Eng. 2017;33(2):90–93. doi: 10.1080/02670844.2015.1108072
- Aruna S, Srinivas G. Wear and corrosion resistant properties of electrodeposited Ni composite coating containing Al2O3–TiO2 composite powder. Surf Eng. 2015;31(9):708–713. doi: 10.1179/1743294415Y.0000000050
- Fayomi OSI, Popoola API, Kanyane LR, et al. Development of reinforced in-situ anti-corrosion and wear Zn-TiO2/ZnTiB2 coatings on mild steel. Results Phys. 2017;7:644–650. doi: 10.1016/j.rinp.2017.01.021
- Abdulwahab M, Fayomi OSI, Popoola API, et al. In-situ hybrid study of thermal behaviour of ZnNi and ZnNiAl2O3 nanocrystallite thin films induced TEA/MEA by electrocodeposition. Results Phys. 2017;7:213–215. doi: 10.1016/j.rinp.2016.11.017
- Ullal Y, Hegde AC. Corrosion protection of electrodeposited multilayer nanocomposite Zn-Ni-SiO2 coatings. Surf Eng Appl Electrochem. 2013;49(2):161–167. doi: 10.3103/S1068375513020142
- Li Q, Fayomi OSI, Popoola API, et al. Research on the tribological behavior of a nanocrystalline zinc coating prepared by pulse reverse electrodeposition. RSC Adv. 2015;5(16):12025–12033. doi: 10.1039/C4RA13691H
- Adabi M, Amadeh A. Effect of electrodeposition conditions on properties of Ni–Al composite coatings. Surf Eng. 2015;31(9):650–658. doi: 10.1179/1743294414Y.0000000449
- Raghavendra CR, Basavarajappa S, Sogalad I. Electrodeposition of Ni-Al2O3 nano composite coating and evaluation of wear characteristics. IOP Conf Ser: Mater Sci Eng. 2016;149(1):1–7.
- Torabinejad V, Aliofkhazraei M, Sabour Rouhaghdam AR, et al. Electrodeposition of Ni–Fe–Mn/Al2O3 functionally graded nanocomposite coatings. Surf Eng. 2016;33:122–130. doi: 10.1080/02670844.2016.1151577
- Allahyarzadeh M, Aliofkhazraei M, Sabour Rouhaghdam AR, et al. Functionally graded nickel–tungsten coating: electrodeposition, corrosion and wear behaviour. Can Metall Q. 2016;55(3):303–311. doi: 10.1080/00084433.2016.1190542
- Torabinejad V, Aliofkhazraei M, Sabour Rouhaghdam A, et al. Functionally graded coating of Ni-Fe fabricated by pulse electrodeposition. J Mater Eng Perform. 2016;25(12):5494–5501. doi: 10.1007/s11665-016-2376-x
- Wang L, Zhang J, Zeng Z, et al. Fabrication of a nanocrystalline Ni–Co/CoO functionally graded layer with excellent electrochemical corrosion and tribological performance. Nanotechnology. 2006;17(18):4614–4623. doi: 10.1088/0957-4484/17/18/014
- Suvorov DV, Gololobov GP, Tolstoguzov AB, et al. Electrodeposition of Ni-W gradient coatings. IOP Conference Ser J Phys. 2017;857(1):1–3.
- Baghal SL, Sohi MH, Amadeh A. A functionally gradient nano-Ni–Co/SiC composite coating on aluminum and its tribological properties. Surf Coat Tech. 2012;206(19):4032–4039. doi: 10.1016/j.surfcoat.2012.03.084
- Lajevardi S, Shahrabi T, Szpunar J. Synthesis of functionally graded nano Al2O3–Ni composite coating by pulse electrodeposition. Appl Surf Sci. 2013;279:180–188. doi: 10.1016/j.apsusc.2013.04.067
- Chang L, Liu W, Duan XY, et al. Pulse plated Zn transition layer in electroplating Zn–Ni coatings on magnesium alloys. Surf Eng. 2012;28(10):725–730. doi: 10.1179/1743294412Y.0000000054
- Ieffa S, Bernasconi R, Nobili L, et al. Direct and pulse plating of metastable Zn–Ni alloys. Trans IMF. 2014;92(6):321–324. doi: 10.1179/0020296714Z.000000000209
- Ghazanlou SI, Farhood AHS, Hosouli S, et al. Pulse frequency and duty cycle effects on the electrodeposited Ni–Co reinforced with micro and nano-sized ZnO. J Mater Sci: Mater Electron. 2017;28:15537–15551.
- Boonyongmaneerat Y, Saengkiettiyut K, Saenapitak S, et al. Corrosion behavior of reverse-pulse electrodeposited Zn-Ni alloys in saline environment. J Mater Eng Perform. 2014;23(1):302–307. doi: 10.1007/s11665-013-0685-x
- Lajevardi S, Shahrabi T, Szpunar J.A, et al. Characterization of the microstructure and texture of functionally graded nickel-Al 2 O 3 nano composite coating produced by pulse deposition. Surf Coat Technol. 2013;232:851–859. doi: 10.1016/j.surfcoat.2013.06.111
- Bahrololoom M, Sani R. The influence of pulse plating parameters on the hardness and wear resistance of nickel–alumina composite coatings. Surf Coat Technol. 2005;192(2):154–163. doi: 10.1016/j.surfcoat.2004.09.023
- Thiemig D, Lange R, Bund A. Influence of pulse plating parameters on the electrocodeposition of matrix metal nanocomposites. Electrochim. Acta. 2007;52(25):7362–7371. doi: 10.1016/j.electacta.2007.06.009
- Chen L, Wang L, Zeng Z, et al. Influence of pulse frequency on the microstructure and wear resistance of electrodeposited Ni–Al2O3 composite coatings. Surf Coat Technol. 2006;201(3):599–605. doi: 10.1016/j.surfcoat.2005.12.008
- Ramanauskas R, Gudavičiūtė L, Kosenko A, et al. Structural and corrosion characterisation of pulse plated Zn and Zn–Ni alloy coatings. Trans IMF. 2012;90(5):237–245. doi: 10.1179/0020296712Z.00000000045
- Tseluikin V, Koreshkova A. Synthesis and properties of zinc–nickel–carbon nanotube composite coatings. Russ J Appl Chem. 2016;89(6):1027–1030. doi: 10.1134/S1070427216060288
- Tseluikin V, Koreshkova A. Electrodeposition of zinc–nickel–carbon nanotubes composite coatings in a reversing mode. Prot Met Phys Chem Surf. 2016;52(6):1040–1042. doi: 10.1134/S2070205116060204
- Thangaraj V. Electrodeposition and corrosion behaviour of some Zn–Fe group metal alloys by pulsed current. Trans IMF. 2009;87(4):208–216. doi: 10.1179/174591909X424816
- Shi P, Hu R, Zhang T, et al. Grain boundary character distribution and its effect on corrosion of Ni–23Cr–16Mo superalloy. Mater Sci Technol. 2017;33(1):84–91. doi: 10.1179/1743284715Y.0000000142
- Abou-Krisha M, Assaf F, Alduaij O, et al. Electrochemical behavior and corrosion resistance of electrodeposited nano-particles Zn-Co-Fe alloy. Anti-Corros Method Mater. 2016;63(1):29–35. doi: 10.1108/ACMM-04-2014-1378
- Alfantazi A, Erb U. Corrosion properties of pulse-plated zinc-nickel alloy coatings. Corrosion. 1996;52(11):880–888. doi: 10.5006/1.3292081
- Alfantazi A, Page J, Erb U. Pulse plating of Zn-Ni alloy coatings. J Appl Electrochem. 1996;26(12):1225–1234. doi: 10.1007/BF00249924
- Gupta R, Das AK, Nagahanumaiah, et al. Pulse electrocodeposited Ni–WC composite coating. Mater Manuf Processes. 2016;31(1):42–47. doi: 10.1080/10426914.2015.1019087
- Rezaeiolum A, Aliofkhazraei M, Karimzadeh A, et al. Electrodeposition of Ni–Mo and Ni–Mo-(nano Al2O3) multilayer coatings. Surf Eng. 2017;72:1–10.
- Soleimani R, Mahboubi F, Kazemi M, et al. Corrosion and tribological behaviour of electroless Ni–P/nano-SiC composite coating on aluminium 6061. Surf Eng. 2015;31(9):714–721. doi: 10.1179/1743294415Y.0000000012
- Sajjadnejad M, Omidvar H, Javanbakht M, et al. Direct current electrodeposition of Zn and Zn–SiC nanocomposite coatings. Trans IMF. 2014;92(4):227–232. doi: 10.1179/0020296714Z.000000000187
- Arakawa T, Chokki K, Nemoto Y, et al. Preparation of Zn–TiO2–ZnO nanocomposites by pulse electrodeposition from non-suspended solutions. J Electrochem Soc. 2017;164(9):626–630. doi: 10.1149/2.0981709jes
- Wasekar NP, Haridoss P, Seshadri SK, et al. Sliding wear behavior of nanocrystalline nickel coatings: influence of grain size. Wear. 2012;296(1):536–546. doi: 10.1016/j.wear.2012.08.003
- Allahyarzadeh M, Rouhaghdam ARS, Torabinejad V, et al. Gradient electrodeposition of Ni-Cu-W (alumina) nanocomposite coating. Mater Des. 2016;107:74–81. doi: 10.1016/j.matdes.2016.06.019
- Udompanit N, Wangyao, P, Henpraserttae, S, et al. Wear response of composition-modulated multilayer Ni-W coatings. Adv Mat Res. 2014;1025–1026:302–309. Trans Tech Publ.
- Mercado V, Mejía I, Bedolla-Jacuinde A. Effect of load and sliding rate on the wear behavior of Ti-containing TWIP steel. J Mater Eng Perform. 2017;26(5):2213–2225. doi: 10.1007/s11665-017-2635-5
- Malatji N, Popoola A, Fayomi O. The effect of nanoparticulate loading on the fabrication and characterization of multi-doped Zn-Al2O3-Cr2O3 hybrid coatings on mild steel. Int J Adv Manuf Tech. 2017;90(9–12):2443–2452. doi: 10.1007/s00170-016-9525-0
- Torabinejad V, Aliofkhazraei M, Sabour Rouhaghdam A, et al. Ni–Fe–Mn–(nano) Al2O3 coating with modulated composition and grain size. Trans Indian Inst Met. 2017;70(5):1199–1207. doi: 10.1007/s12666-016-0913-9
- Bajwa R, Khan Z, Nazir H, et al. Wear and friction properties of electrodeposited Ni-based coatings subject to nano-enhanced lubricant and composite coating. Acta Metall Sinica. 2016;29(10):902–910. doi: 10.1007/s40195-016-0470-6