Research on microstructure transformation and property of 18Cr–0.2C Fe-based coatings

References

• Technology roadmapping of Guangdong Yangjiang hardware knife & scissor industry. Guangzhou: South China University of Technology Press; 2014.
   Google Scholar
• Zhang Y, Yang L, Dai J, et al. Microstructure and mechanical properties of pulsed laser cladded IN718 alloy coating. Surf Eng. 2018;34:259–266. doi: 10.1080/02670844.2016.1200847
   Web of Science ®Google Scholar
• Zhang H, Zou Y, Zou ZD, et al. Microstructures and properties of low-chromium high corrosion-resistant TiC-VC reinforced Fe-based laser cladding layer. J Alloys Comp. 2015;622:62–68. doi: 10.1016/j.jallcom.2014.10.012
   Web of Science ®Google Scholar
• Wen P, Feng ZH, Zheng SQ. Formation quality optimization of laser hot wire cladding for repairing martensite precipitation hardening stainless steel. Opt Laser Technol. 2015;65:180–188. doi: 10.1016/j.optlastec.2014.07.017
   Web of Science ®Google Scholar
• Mahmoud ERI, Ikeuchi K, Takahashi M. Fabrication of SiC particle reinforced composite on aluminium surface by friction stir processing. Sci Technol Weld Joining. 2008;13:607–618. doi: 10.1179/136217108X333327
   Web of Science ®Google Scholar
• Xing YQ, Deng JX, Feng XT, et al. Effect of laser surface texturing on Si3N4/TiC ceramic sliding against steel under dry friction. Mater Des. 2013;52:234–245. doi: 10.1016/j.matdes.2013.05.077
   Web of Science ®Google Scholar
• Kaiming W, Yulong L, Hanguang F, et al. A study of laser cladding NiCrBSi/Mo composite coatings. Surf Eng. 2018;34:267–275. doi: 10.1080/02670844.2016.1259096
   Web of Science ®Google Scholar
• Linqi L, Chengwu Y, Jian H, et al. Characteristics of interdendritic residual austenite in laser cladding of hagh hardness Fe-based coating. Chinese J Lasers. 2017;44(3):1–5. doi: 10.3788/CJL201744.0302011
   Google Scholar
• Yin Y, Pan CL, Zhang RH, et al. The effect of Ti addition on the microstructure and properties of high chromium iron-based coatings. J Alloys Comp. 2015;765:782–790. doi: 10.1016/j.jallcom.2018.05.230
   Google Scholar
• Gulyaev AP. Carbide transformations in alloys steels. Metalloved I Term Obrab Met. 1959;1:54–61.
   Google Scholar
• Wieczerzal K, Bala P, Stepien M, et al. Formation of eutectic carbides in Fe–Cr–Mo–C alloy during non- equilibrium crystallization. Mater Des. 2016;94:61–68. doi: 10.1016/j.matdes.2016.01.028
   Web of Science ®Google Scholar
• Huang S, Sun D, Wang W, et al. Microstructures and properties of in-situ TiC particles reinforced Ni-based composite coatings prepared by plasma spray welding. Ceram Int. 2015;41:12202–12210. doi: 10.1016/j.ceramint.2015.06.041
   Web of Science ®Google Scholar
• Wu Q, Li W, Zhong N, et al. Microstructure and wear behavior of laser cladding VC-Cr7C3 ceramic coating on steel substrate. Mater Des. 2013;49:13–18. doi: 10.1016/j.matdes.2013.01.067
   Web of Science ®Google Scholar
• Li YJ. Metallurgy of welding. Beijing: China Machine Press; 1999. p. 56–62
   Google Scholar
• Asta M, Beckermann C, Karma A, et al. Solidification microstructures and solid-state parallels: recent developments, future directions. Acta Mater. 2009;57:941–971. doi: 10.1016/j.actamat.2008.10.020
   Web of Science ®Google Scholar
• Lin X, Huang WD, Feng J. History-dependent selection of primary cellular/dendritic spacing during unidirectional solidification in aluminum alloys. Acta Mater. 1999;47:3271–3280. doi: 10.1016/S1359-6454(99)00166-4
   Web of Science ®Google Scholar
• Warren JA, Langer JS. Stability of dendritic spacing in a directional solidification experiment. Phys Rev E. 1993;47:2702–2712. doi: 10.1103/PhysRevE.47.2702
   PubMed Web of Science ®Google Scholar
• Sun JL, Deng YL, Hu DJ. Microstructure characterization and properties of laser cladding foeming 316L stainless steel. Chinese J Lasers. 2005;32:1441–1444.
   Google Scholar
• Wang N, Wang Z, Aust KT, et al. Effect of grain size on mechanical properties of nanocrystalline materials. Acta Metall Mater. 1995;43:519–528. doi: 10.1016/0956-7151(94)00253-E
   Google Scholar
• Yu WB, Zhao HB, Wang L, et al. The influence of T6 treatment on fracture behavior of hypereutectic Al–Si HPDC casting alloy. J Alloys Comp. 2018;731:444–451. doi: 10.1016/j.jallcom.2017.10.074
   Web of Science ®Google Scholar
• Gurland J, Plateau J. The mechanism of ductile rupture of metals containing inclusions. Providence: Institut de Recherches de la Siderugie, St.-Germain-en-Laye, France, Brown Univ.; 1963.
   Google Scholar