References
- Larisch B, Brusky U, Spies HJ. Plasma nitriding of stainless steels at low temperatures. Surf Coat Technol. 1999;205:116–119. doi:10.1016/S0257-8972(99)00084-5.
- Malinova T, Malinov S, Pantev N. Simulation of microhardness profiles for nitrocarburized surface layers by artificial neural network. Surf Coat Technol. 2001;135(2):258–267. doi:10.1016/S0257-8972(00)00991-9.
- Karakan M, Alsaran A, Çelik A. Effect of process time on structural and tribological properties of ferritic plasma nitrocarburized AISI 4140 steel. Mater Des. 2004;25(4):349–353. doi:10.1016/j.matdes.2003.10.017.
- Lee I. Plasma post oxidation of nitrocarburized AISI 4140 steel. Rare Met. 2006;25:267–271. doi: 10.1016/S1001-0521(08)60095-9.
- Fattah M, Mahboubi M. Microstructure characterization and corrosion properties of nitrocarburized AISI 4140 low alloy steel. J Mater Eng Perform. 2012;21:548–552. doi: 10.1007/s11665-011-9922-3.
- Liu C, Liu P, Zhao ZB, et al. Room temperature creep of high strength steel. J Mater Des. 2001;22(4):325–328. doi: 10.1016/S0261-3069(00)00074-1.
- Nie DF, Zhao J, Mo T, et al. Room temperature creep and its effect on flow stress in a X70 pipeline steel. Mater Lett. 2008;62:51–53. doi: 10.1016/j.matlet.2007.04.068.
- Das CR, Albert SK, Bhaduri AK, et al. Understanding room temperature deformation behavior through indentation studies on modified 9Cr–1Mo steel weldments. Mater Sci Eng A. 2012;552:419–426. doi: 10.1016/j.msea.2012.05.064.
- Ghassemi-Armaki H, Maa R, Bhat SP, et al. Deformation response of ferrite and martensite in a dual-phase steel. Acta Mater. 2014;62:197–211. doi: 10.1016/j.actamat.2013.10.001.
- Zhu XY, Liu XJ, Zeng F, et al. Room temperature nanoindentation creep of nanoscale Ag/Fe multilayers. J Mater Lett. 2010;64(1):53–56. doi: 10.1016/j.matlet.2009.10.003.
- Dean J, Bradbury A, Aldrich-Smith G, et al. A procedure for extracting primary and secondary creep parameters from nanoindentation data. Mech Mater. 2013;65(20):124–134. doi:10.1016/j.mechmat.2013.05.014.
- Huang Z, Abad MD, Ramsey JK, et al. A high temperature mechanical study on PH 13-8 Mo maraging steel. Mater Sci Eng A. 2016;651:574–582. doi:10.1016/j.msea.2015.10.077.
- Kim SI, Byon SM, Seo SW, et al. Constitutive equation for AISI4140 steel applicable to a wide range of strain rates at elevated temperatures. J Steel Res Int. 2006;77(5):355–360. doi: 10.1002/srin.200606398.
- Çelik A, Karadeniz S. Improvement of the fatigue strength of AISI 4140 steel by an ion nitriding process. Surf Coat Technol. 1995;72(3):169–173. doi: 10.1016/0257-8972(94)02348-4.
- Limodin N, Verreman Y, Tarfa TN. Axial fatigue of a gas-nitrided quenched and tempered AISI 4140 steel: effect of nitriding depth. Fatigue Fract Eng Mater Struct. 2003;26:811–820. doi: 10.1046/j.1460-2695.2003.00682.x.
- Liu H, Li JC, Sun F, et al. Characterization and effect of pre-oxidation on D.C. plasma nitriding for AISI4140 steel. Vacuum. 2014;109(42):170–174. doi:10.1016/j.vacuum.2014.07.017.
- Lucas BN, Oliver WC. Indentation power-law creep of high-purity indium. Metall Mater Trans A. 1999;30(3):601–610. doi: 10.1007/s11661-999-0051-7.
- Mayo MJ, Nix WD. A micro-indentation study of superplasticity in Pb, Sn, and Sn-38- wt-percent-Pb. Acta Metall. 1988;36(8):2183–2192. doi: 10.1016/0001-6160(88)90319-7.
- Fátay D, Gubicza J, Szommer P, et al. Thermal stability and mechanical properties of a Zr-based bulk amorphous alloy. Mater Sci Eng A. 2004;387–389(1):1001–1004. doi: 10.1016/j.msea.2004.01.088.
- Sargent PM, Ashby MF. Indentation creep. Netherlands: Springer; 1991. Chapter 2, Mechanics of creep brittle materials; p. 326 –344. doi:10.1179/mst.1992.8.7.594.
- Lee I. Post-oxidizing treatments of the compound layer on the AISI 4135 steel produced by plasma nitrocarburizing. Surf Coat Technol. 2004;188–189(1):669–674. doi: 10.1016/j.surfcoat.2004.07.093.
- Fattah M, Mahboubi F. Comparison of ferritic and austenitic plasma nitriding and nitrocarburizingbehavior of AISI 4140 low alloy steel. Mater Des. 2010;31(8):3915–3921. doi: 10.1016/j.matdes.2010.03.008.
- Prieto G, Bakoglidis KD, Tuckart WR, et al. Nanotribological behaviour of deep cryogenically treated martensitic stainless steel. Beilstein J Nanotechnol. 2017;8(1):1760–1768. doi: 10.3762/bjnano.8.177.
- Kaur N, Kaur D. Room temperature nanoindentation creep of nanograined NiTiW shape memory alloy thin films. Surf Coat Technol. 2014;260:260–265. doi: 10.1016/j.surfcoat.2014.07.090.
- Malygin GA. Strength and plasticity of nanocrystalline materials and nanosized crystals. Phys Usp. 2011;54(11):1091. doi: 10.3367/UFNe.0181.201111a.1129.
- Panfil D, Kulka M, Wach P, et al. Nanomechanical properties of iron nitrides produced on 42CrMo4 steel by controlled gas nitriding and laser heat treatment. J Alloys Compd. 2017;706:63–75. doi: 10.1016/j.jallcom.2017.02.220.
- Krishnaraj N, Bala Srinivasan P, Iyer JLK, et al. Optimization of compound layer thickness for wear resistance of nitrocarburized H 11 steels. Wear. 1998;215:123–130. doi: 10.1016/S0043-1648(97)00276-7.
- Ratajski J, Tacikowski J, Somers MAJ. Development of compound layer of iron (carbo) nitrides during nitriding of steel. Surf Eng. 2003;19(4):285–291. doi: 10.1179/026708403322499218.
- Chen YH, Huang JC, Wang L, et al. Effect of residual stresses on nanoindentation creep behavior of Zr-based bulk metallic glasses. Intermetallics. 2013;41(10):58–62. doi: 10.1016/j.intermet.2013.05.001.
- Tobola D, Kania B. Phase composition and stress state in the surface layers of burnished and gas nitrided Sverker 21 and Vanadis 6 tool steels. Surf Coat Technol. 2018;353:105–115. doi: 10.1016/j.surfcoat.2018.08.055.