References
- Mandal P, Mondal SC. Investigation of electro-thermal property of Cu-MWCNT-coated 316L stainless steel. Surf Eng. 2018;34:697–704. doi: 10.1080/02670844.2017.1395981
- Schneider M, Weiser M, Dörfler S, et al. Electrodeposition of copper on aligned multi-walled carbon nanotubes. Surf Eng. 2012;28:435–441. doi: 10.1179/1743294411Y.0000000095
- Zheng X, Kim JS, Park CW. Multiwall carbon nanotube/copper porous coating for heat transfer application. Surf Eng. 2015;31:723–732. doi: 10.1179/1743294415Y.0000000030
- Carvalho O, Miranda G, Soares D, et al. Carbon nanotube dispersion in aluminum matrix composites – quantification and influence on strength. Mech Adv Mater Struct. 2016;23:66–73. doi: 10.1080/15376494.2014.929766
- Al-Aqeeli N, Abdullahi K, Suryanarayana C, et al. Structure of mechanically milled CNT-reinforced Al-alloy nanocomposites. Mater Manuf Process. 2013;28:984–990.
- Cheng YC, Lin CK, Tan AH, et al. Effect of Spinning deformation processing on the wear and Corrosion properties of Al-7Si-0.3Mg Alloys. Mater Manuf Process. 2010;25:689–695. doi: 10.1080/10426914.2010.489628
- Dhandapani S, Rajmohan T, Palanikumar K, et al. Synthesis and characterization of dual particle (MWCT+B 4 C) reinforced sintered hybrid aluminum matrix composites. Part Sci Technol. 2016;34:255–262. doi: 10.1080/02726351.2015.1069431
- Carvalho O, Buciumeanu M, Soares D, et al. Improvement on sliding wear behavior of Al/cast iron tribopair by CNT’s reinforcement of an Al alloy. Tribol Trans. 2015;58:643–653. doi: 10.1080/10402004.2014.1002143
- Mohal S, Kumar H. Parametric optimization of multiwalled carbon nanotube-assisted electric discharge machining of Al-10%SiC p metal matrix composite by response surface methodology. Mater Manuf Process. 2017;32:263–273. doi: 10.1080/10426914.2016.1140196
- Borkar T, Harimkar S. Microstructure and wear behaviour of pulse electrodeposited Ni–CNT composite coatings. Surf Eng. 2011;27:524–530. doi: 10.1179/1743294410Y.0000000001
- Kartal M, Uysal M, Gul H, et al. Pulse electrocodeposition of Ni/MWCNT nanocomposite coatings. Surf Eng. 2015;31:659–665. doi: 10.1179/1743294415Y.0000000069
- Jamshidijam M, Akbari-Fakhrabadi A, Masoudpanah SM, et al. Wear behavior of multiwalled carbon nanotube/AZ31 composite obtained by friction stir processing. Tribol Trans. 2013;56:827–832. doi: 10.1080/10402004.2013.804969
- Cui Y. Influence of laser surface melting on tribological behaviour of AZ31B. Surf Eng. 2018;34:296–300. doi: 10.1080/02670844.2016.1246994
- Suneesh E, Sivapragash M. Comprehensive studies on processing and characterization of hybrid magnesium composites. Mater Manuf Process. 2018;33:1324–1345. doi: 10.1080/10426914.2018.1453155
- Yue TM, Huang KJ, Man HC. In situ laser cladding of Al2O3 bearing coatings on aluminium alloy 7075 for improvement of wear resistance. Surf Eng. 2007;23:142–146. doi: 10.1179/174329407X169449
- Canakci A, Arslan F, Varol T. Effect of volume fraction and size of B 4 C particles on production and microstructure properties of B 4 C reinforced aluminium alloy composites. Mater Sci Technol. 2013;29:954–960. doi: 10.1179/1743284713Y.0000000232
- Gnanavelbabu A, Rajkumar K, Saravanan P. Investigation on the cutting quality characteristics of abrasive water jet machining of AA6061-B 4 C-hBN hybrid metal matrix composites. Mater Manuf Process. 2018;33:1313–1323. doi: 10.1080/10426914.2018.1453146
- Yang T, Yu M, Chen H, et al. Characterisation of cold sprayed Al5056/SiCp coating: effect of SiC particle size. Surf Eng. 2016;32:641–649. doi: 10.1179/1743294415Y.0000000042
- Sharma N, Khanna R, Singh G, et al. Fabrication of 6061 aluminum alloy reinforced with Si3N4/n-Gr and its wear performance optimization using integrated RSM-GA. Part Sci Technol. 2017;35:731–741. doi: 10.1080/02726351.2016.1196276
- Sharma P, Sharma S, Khanduja D. Production and characterization of AA6082-(Si3N4+Gr) stir cast hybrid composites. Part Sci Technol. 2017;35:158–165. doi: 10.1080/02726351.2016.1143066
- Yildirim M, Guru M. Effect of Sintering time on hardness and wear behaviours of carbon nanotubes reinforced aluminium matrix composites. Acta Phys Pol A. 2017;131:92–95. doi: 10.12693/APhysPolA.131.92
- Bastwros MMH, Esawi AMK, Wifi A. Friction and wear behavior of Al–CNT composites. Wear. 2013;307:164–173. doi: 10.1016/j.wear.2013.08.021
- Xu W, Ke L, Xing L, et al. On the influence of carbon nanotubes on the wear performance and hardness of aluminium matrix composites. Materwiss Werksttech. 2011;42:375–378. doi: 10.1002/mawe.201100791
- Radhika N, Subramanian R, Prasat SV. Tribological behaviour of aluminium/alumina/graphite hybrid metal matrix composite using Taguchi’s techniques. J Miner Mater Charact Eng. 2011;10:427–443.
- Zhou S ming, Zhang X bin, Ding Z peng, et al. Fabrication and tribological properties of carbon nanotubes reinforced Al composites prepared by pressureless infiltration technique. Compos Part A Appl Sci Manuf. 2007;38:301–306. doi: 10.1016/j.compositesa.2006.04.004
- Sharma A, Sharma VM, Mewar S, et al. Friction stir processing of Al6061-SiC-graphite hybrid surface composites. Mater Manuf Process. 2018;33:795–804. doi: 10.1080/10426914.2017.1401726
- Sharma A, Mani SV, Sahoo B, et al. Study of nano-mechanical, electrochemical and Raman spectroscopic behavior of Al6061-SiC-graphite hybrid surface composite fabricated through friction stir processing. J Compos Sci. 2018;2:32. doi: 10.3390/jcs2020032
- Sahoo B, Paul J. Particle size and shape effects on the surface mechanical properties of aluminium coated with carbonaceous materials. J Compos Mater. 2019;53:261–270. doi: 10.1177/0021998318781932
- Sharma A, Paul J. Surface modification of Al6061 by graphene impregnation through a powder metallurgy assisted friction surfacing. Surf Coatings Technol. 2018;337:12–23. doi: 10.1016/j.surfcoat.2017.12.059
- Sahoo B, Girhe SD, Paul J. Influence of process parameters and temperature on the solid state fabrication of multilayered graphene-aluminium surface nanocomposites. J Manuf Process. 2018;34:486–494. doi: 10.1016/j.jmapro.2018.06.042
- Sharma A, Sharma VM, Sahoo B, et al. Effect of multiple micro channel reinforcement filling strategy on Al6061-graphene nanocomposite fabricated through friction stir processing. J Manuf Process. 2019;37:53–70. doi: 10.1016/j.jmapro.2018.11.009
- Sahoo B, Narsimhachary D. Tribological behavior of solid-state processed Al-1100/GNP surface nanocomposites. J Mater Eng Perform. 2018;27(12):6529–6544. doi: 10.1007/s11665-018-3727-6
- Sahoo B, Paul J. Solid state processed Al-1100 alloy/MWCNT surface nanocomposites. Materialia. 2018;2:196–207. doi: 10.1016/j.mtla.2018.08.003
- Sahoo B, Kumar R, Joseph J, et al. Preparation of aluminium 6063-graphite surface composites by an electrical resistance heat assisted pressing technique. Surf Coatings Technol. 2017;309:563–572. doi: 10.1016/j.surfcoat.2016.12.011
- Kim KT, Cha S II, Gemming T, et al. The role of interfacial oxygen atoms in the enhanced mechanical properties of carbon-nanotube-reinforced metal matrix nano composites. Smal. 2008;4(l ):1936–1940. doi: 10.1002/smll.200701223
- Dresselhaus MS, Dresselhaus G, Saito R, et al. Raman spectroscopy of carbon nanotubes. Phys Rep. 2005;409:47–99. doi: 10.1016/j.physrep.2004.10.006
- Park JG, Keum DH, Lee YH, et al. Strengthening mechanisms in carbon nanotube-reinforced aluminum composites. Carbon N Y. 2015;95:690–698. doi: 10.1016/j.carbon.2015.08.112
- Bakshi SR, Musaramthota V, Virzi DA, et al. Spark plasma sintered tantalum carbide-carbon nanotube composite: effect of pressure, carbon nanotube length and dispersion technique on microstructure and mechanical properties. Mater Sci Eng A. 2011;528:2538–2547. doi: 10.1016/j.msea.2010.12.017
- Antunes EF, Lobo AO, Corat EJ, et al. Influence of diameter in the Raman spectra of aligned multi-walled carbon nanotubes. Carbon N Y. 2007;45:913–921. doi: 10.1016/j.carbon.2007.01.003
- Kim KK, Park JS, Kim SJ, et al. Dependence of Raman spectra G’ band intensity on metallicity of single-wall carbon nanotubes carbon nanotubes. Phys Rev B. 2007;76:205426. doi: 10.1103/PhysRevB.76.205426
- Cooper CA, Young RJ, Halsall M. Investigation into the deformation of carbon nanotubes and their composites through the use of Raman spectroscopy. Compos Part A Appl Sci Manuf. 2001;32:401–411. doi: 10.1016/S1359-835X(00)00107-X
- Ouyang G, Zhu WG, Sun CQ, et al. Atomistic origin of lattice strain on stiffness of nanoparticles. Phys Chem Chem Phys. 2010;12:1543–1549. doi: 10.1039/b919982a
- Suh NP. The delamination theory of wear. Wear. 1973;25:111–124. doi: 10.1016/0043-1648(73)90125-7
- Choi HJ, Lee SM, Bae DH. Wear characteristic of aluminum-based composites containing multi-walled carbon nanotubes. Wear. 2010;270:12–18. doi: 10.1016/j.wear.2010.08.024
- Rasool G, Stack MM. Wear maps for TiC composite based coatings deposited on 303 stainless steel. Tribol. Int. 2014;74:93–102. doi: 10.1016/j.triboint.2014.02.002