References
- Brindley WJ. Thermal barrier coatings. J Therm Spray Technol. 1996;5:379–380. doi: 10.1007/BF02645266
- Wielage B, Hofmann U, Steinhauser S, et al. Improving wear and corrosion resistance of thermal sprayed coatings. Surf Eng. 1998;14:136–138. doi: 10.1179/sur.1998.14.2.136
- Keyvani A, Bahamirian M. Hot corrosion and mechanical properties of nanostructured Al2O3/CSZ composite TBCs. Surf Eng. 2017;33:433–443. doi: 10.1080/02670844.2016.1267423
- Memmi IT. Ceramic coatings in ancient times: high technology surface modification technologies. Surf Eng. 2013;29:84–97. doi: 10.1179/1743294412Y.0000000078
- Anderson A. Corrosion resistance of ceramic coatings sprayed on stainless steel substrates. Int J Amb Ener. 2017;38:320–322. doi: 10.1080/01430750.2015.1086679
- Pawlowski L. The science and engineering of thermal spray coatings. West Sussex: John Wiley & Sons; 2008.
- Fukanuma H. A porosity formation and flattening model of an impinging molten particle in thermal spray coatings. J Therm Spray Technol. 1994;3:33–44. doi: 10.1007/BF02648997
- Chatha SS, Sidhu HS, Sidhu BS. Characterisation and corrosion-erosion behaviour of carbide based thermal spray coatings. J Min Mater Char Eng. 2012;11:569–586.
- Ghosh D, Das S, Roy H, et al. Oxidation behaviour of nanostructured YSZ plasma sprayed coated Inconel alloy. Surf Eng. 2018;34:22–29. doi: 10.1179/1743294415Y.0000000099
- Wang F, Geng S. High temperature oxidation and corrosion resistant nanocrystalline coatings. Surf Eng. 2003;19:32–36. doi: 10.1179/026708402225010056
- Xu S, Chen L, Gong M, et al. Characterization and engineering application of a novel ceramic composite insulation material. Comp B: Eng. 2017;111:143–147. doi: 10.1016/j.compositesb.2016.12.010
- Dussing M, Yang H, Topping TD, et al. Microstructure and mechanical behavior of cryomilled Al–Mg composites reinforced with nanometric yttria partially stabilized zirconia. Cham: Springer; 2018.
- Suib SL. A review of nanoceramic materials for use in ceramic matrix composites. Sol-gel based nanoceramic materials: preparation, properties and applications. Cham: Springer; 2017. p. 185–230.
- Martin R, Vick M, Enneti RK, et al. Sintering characteristics of a powder injection molded ceria-stabilized zirconia–mullite composite. Mater Manuf Process. 2015;30:616–623. doi: 10.1080/10426914.2014.941871
- Chen Y, Balani K, Agarwal A. Modified Eshelby tensor modeling for elastic property prediction of carbon nanotube reinforced ceramic nanocomposites. Appl Phys Lett. 2007;91:1–3. 031903.
- Gong M, Mei F, Qiao S, et al. Determination of strength properties for yttria stabilised zirconia coatings. Surf Eng. 2015;31:308–315. doi: 10.1179/1743294415Y.0000000004
- Hvizdoš P, Puchý V, Duszová A, et al. Carbon nanofibers reinforced ceramic matrix composites. Rijeka: InTech Open Access Publishers; 2011. p. 241–266.
- Saleh TA, Gupta VK. Characterization of the chemical bonding between Al2O3 and nanotube in MWCNT/Al2O3 nanocomposite. Curr Nano. 2012;8:739–743. doi: 10.2174/157341312802884418
- Deng C, Wang D, Zhang X, et al. Processing and properties of carbon nanotubes reinforced aluminum composites. Mater Sci Eng A. 2007;444:138–145. doi: 10.1016/j.msea.2006.08.057
- Balani K, Harimkar SP, Keshri A, et al. Multiscale wear of plasma-sprayed carbon-nanotube-reinforced aluminum oxide nanocomposite coating. Act Mater. 2008;56:5984–5994. doi: 10.1016/j.actamat.2008.08.020
- Asl MS, Farahbakhsh I, Nayebi B. Characteristics of multi-walled carbon nanotube toughened ZrB2–SiC ceramic composite prepared by hot pressing. Ceram Int. 2016;42:1950–1958. doi: 10.1016/j.ceramint.2015.09.165
- Liu Y, Ramirez C, Zhang L, et al. In situ direct observation of toughening in isotropic nanocomposites of alumina ceramic and multiwall carbon nanotubes. Acta Mater. 2017;127:203–210. doi: 10.1016/j.actamat.2017.01.024
- Nisar A, Balani K. Phase and microstructural correlation of spark plasma sintered HfB2-ZrB2 based Ultra-high temperature ceramic composites. Coatings. 2017;7:1–15.
- Chen XH, Chen CS, Xiao HN, et al. Corrosion behavior of carbon nanotubes–Ni composite coating. Surf Coat Technol. 2005;191:351–356. doi: 10.1016/j.surfcoat.2004.04.055
- Praveen B, Venkatesha T, Naik YA, et al. Corrosion studies of carbon nanotubes–Zn composite coating. Surf Coat Technol. 2007;201:5836–5842. doi: 10.1016/j.surfcoat.2006.10.034
- Chen W, Tu J, Wang L, et al. Tribological application of carbon nanotubes in a metal-based composite coating and composites. Carbon N Y. 2003;41:215–222. doi: 10.1016/S0008-6223(02)00265-8
- Keshri AK, Singh V, Huang J, et al. Intermediate temperature tribological behavior of carbon nanotube reinforced plasma sprayed aluminum oxide coating. Surf Coat Technol. 2010;204:1847–1855. doi: 10.1016/j.surfcoat.2009.11.032
- Balani K, Chen Y, Harimkar SP, et al. Tribological behavior of plasma-sprayed carbon nanotube-reinforced hydroxyapatite coating in physiological solution. Acta Biomater. 2007;3:944–951. doi: 10.1016/j.actbio.2007.06.001
- Goyal R, Sidhu BS, Chawla V. Improving the high-temperature oxidation resistance of ASME-SA213-T11 boiler tube steel by plasma spraying with CNT-reinforced alumina coatings. Anti Corr Met Mater. 2018;65:217–223. doi: 10.1108/ACMM-03-2017-1778
- Goyal K, Singh H, Bhatia R. Effect of carbon nanotubes on properties of ceramics based composite coatings. Adv Eng Forum. 2018;26:53–66. doi: 10.4028/www.scientific.net/AEF.26.53
- Goyal K, Singh H, Bhatia R. Experimental investigations of carbon nanotubes reinforcement on properties of ceramics based composite coating, J Aus Ceram Soc. 2018. Published online first. doi:10.1007/s41779-018-0237-9.
- Goyal K, Singh H, Bhatia R. Mechanical and microstructural properties of carbon nanotubes reinforced chromium oxide coated boiler steel. World J Eng. 2018. published online. doi:10.1108/WJE-10-2017-0315.
- Bala N, Singh H, Prakash S. Accelerated hot corrosion studies of cold spray Ni–50Cr coating on boiler steels. Mater Des. 2010;31:244–253. doi: 10.1016/j.matdes.2009.06.033
- Prakash S, Singh S, Sidhu B. Tube failures incoal fired boilers. Proceedings of National Seminar on Advances in Material and Processing. India: Indian Institute of Roorkee; 2001. p. 245–253.
- Sidhu T, Prakash S, Agrawal R. Characterisations of HVOF sprayed NiCrBSi coatings on Ni-and Fe-based superalloys and evaluation of cyclic oxidation behaviour of some Ni-based superalloys in molten salt environment. Thin Solid Films. 2006;515:95–105. doi: 10.1016/j.tsf.2005.12.041
- Ghosh D, Mitra S. Plasma sprayed Cr3C2–Ni–Cr coating for oxidation protection of 2· 25Cr–1Mo steel. Surf Eng. 2015;31:342–348. doi: 10.1179/1743294414Y.0000000336
- Mishra S, Prakash S. Erosion–corrosion behaviour of Ni–20Cr plasma coating in actual boiler environment. Surf Eng. 2015;31:29–38. doi: 10.1179/1743294414Y.0000000338
- Singhal S, Pasricha R, Jangra M, et al. Carbon nanotubes: amino functionalization and its application in the fabrication of Al-matrix composites. Powder Technol. 2012;215:254–263. doi: 10.1016/j.powtec.2011.10.013
- Ahmad I, Unwin M, Cao H, et al. Multi-walled carbon nanotubes reinforced Al 2 O 3 nanocomposites: mechanical properties and interfacial investigations. Comp Sci Technol. 2010;70:1199–1206. doi: 10.1016/j.compscitech.2010.03.007
- Bakshi SR, Singh V, Balani K, et al. Carbon nanotube reinforced aluminum composite coating via cold spraying. Surf Coat Technol. 2008;202:5162–5169. doi: 10.1016/j.surfcoat.2008.05.042
- Bakhsheshi-Rad H, Hamzah E, Ismail A, et al. Titania-carbon nanotubes nanocomposite coating on Mg alloy: microstructural characterisation and mechanical properties. Mater Sci Technol. 2018;34:378–387. doi: 10.1080/02670836.2017.1393975
- Yildirim M, Özyürek D, Gürü M. Investigation of microstructure and wear behaviors of al matrix composites reinforced by carbon nanotube. Fullerenes Nanotubes Carbon Nanostruct. 2016;24:467–473. doi: 10.1080/1536383X.2016.1182504
- Han G, Wang Z, Liu K, et al. Synthesis of CNT-reinforced AZ31 magnesium alloy composites with uniformly distributed CNTs. Mater Sci Eng A. 2015;628:350–357. doi: 10.1016/j.msea.2015.01.039
- Guo W, Tam H-Y. Effects of carbon nanotubes on wear of WC/Co micropunches. Int J Adv Manuf Technol. 2014;72:269–275. doi: 10.1007/s00170-014-5661-6
- Goyal R, Sidhu BS, Chawla V. Characterization of plasma-sprayed carbon nanotube (CNT)-reinforced alumina coatings on ASME-SA213-T11 boiler tube steel. Int J Adv Manuf Technol. 2017;92(9-12):3225–3235. doi: 10.1007/s00170-017-0405-z
- Goyal R, Chawla V, Sidhu BS. Study on porosity of plasma sprayed carbon nano tube reinforced composite coatings. Asian Rev Mech Eng. 2014;3:65–69.
- Keshri AK, Huang J, Singh V, et al. Synthesis of aluminum oxide coating with carbon nanotube reinforcement produced by chemical vapor deposition for improved fracture and wear resistance. Carbon. 2010;48:431–442. doi: 10.1016/j.carbon.2009.08.046