References
- Jayaraman N, Prevey P, Ontko N, et al. Proceedings of the 9th International Conference on Shot Peening (ICSP9): Paris: 6-9 September 2005, Marne la Vallee (France). http://oai.dtic.mil/oai/oai?verb=getRecord&metadataPrefix=html&identifier=ADA444128.
- Lodhi ZF, Mol JMC, Hovestad A, et al. Corrosion resistance of Zn–Co–Fe alloy coatings on high strength steel. Surf Coat Technol. 2009;203:1415–1422. DOI:10.1016/j.surfcoat.2008.11.019.
- Roumina R, Embury JD, Bouaziz O, et al. Mechanical behavior of a compositionally graded 300M steel. Mater Sci Eng A. 2013;578:140–149. DOI:10.1016/j.msea.2013.04.006.
- Zhao W, Liu D, Zhang X, et al. Improving the fretting and corrosion fatigue performance of 300M ultra-high strength steel using the ultrasonic surface rolling process. Int J Fatigue. 2019;121:30–38. DOI:10.1016/j.ijfatigue.2018.11.017.
- Padmanabhan R, Wood WE. Stress corrosion cracking behavior of 300M steel under different heat treated conditions. Corrosion. 1985;41:688–699. DOI:10.5006/1.3583005.
- Chen C, Zhu LQ, Li WP, et al. Corrosion behavior of 300M steel in three area-to-volume ratio simulated water environments. Acta Aeronaut Astronaut Sin. 2014;35. DOI:10.7527/S1000-6893.2013.0336.
- Wang P-N, Chang S-H. Effect of the mechanical properties and corrosion behaviors of nickel-cadmium duplex electroplated AISI 4340 steel by using various solid solution treatments. Mater Trans. 2018;59:406. Available from: http://search.ebscohost.com/login.aspx?direct=true&db=edselc&AN=edselc.2-52.0-85042698853&site=eds-live. doi: 10.2320/matertrans.M2017282
- Tillmann W, Hollingsworth P, Baumann I, et al. Thermally sprayed fine structured WC-12Co coatings finished by ball burnishing and grinding as an innovative approach to protect forming tools against wear. Surf Coat Technol. 2015;268:134–141. DOI:10.1016/j.surfcoat.2014.06.039.
- Abou-Elela SI, El-Kamah HM, Aly HI. Waste minimization in the electroplating industry (case study). Int J Environ Stud. 1998;55. DOI:10.1080/00207239808711186.
- Alkaya E, Demirer GN. Greening of production in metal processing industry through process modifications and improved management practices. Resour Conserv Recycl. 2013;77:89–96. DOI:10.1016/j.resconrec.2013.06.004.
- Espallargas N. Introduction to thermal spray coatings. Future Development of Thermal Spray Coatings; 2015. p. 1–13. DOI:10.1016/B978-0-85709-769-9.00001-4.
- Zhang D, Kong D. Microstructures and immersion corrosion behavior of laser thermal sprayed amorphous Al-Ni coatings in 3.5% NaCl solution. J Alloys Compd. 2018;735:1–12. DOI:10.1016/j.jallcom.2017.11.054.
- Liu SH, Li CX, Li L, et al. Development of long laminar plasma jet on thermal spraying process: microstructures of zirconia coatings. Surf Coat Technol. 2018;337:241–249. DOI:10.1016/j.surfcoat.2018.01.003.
- Bolelli G, Berger LM, Bonetti M, et al. Comparative study of the dry sliding wear behaviour of HVOF-sprayed WC-(W,Cr)2C-Ni and WC-CoCr hardmetal coatings. Wear. 2014;309:96–111. DOI:10.1016/j.wear.2013.11.001.
- Morris JH, Perkins PG, Rose AEA, et al. The chemistry and binding properties of aluminium phosphates. Chem Soc Rev. 1977;6:173–194. DOI:10.1039/CS9770600173.
- Hong L-Y, Han H-J, Ha H, et al. Development of Cr-free aluminum phosphate binders and their composite applications. Compos Sci Technol. 2007;67:1195–1201. DOI:10.1016/j.compscitech.2006.05.025.
- Armstrong G. Aerospace engineering coatings: today and next five years. Trans IMF. 2010;88:6–7. DOI:10.1179/174591909X12596821284674.
- Chung DDL. Acid aluminum phosphate for the binding and coating of materials. J Mater Sci. 2003;38:2785–2791. DOI:10.1023/A:1024446014334.
- Chen D, He L, Shang S. Study on aluminum phosphate binder and related Al2O3-SiC ceramic coating. Mater Sci Eng A. 2003;348:29–34. DOI:10.1016/S0921-5093(02)00643-3.
- Vippola M, Ahmaniemi S, Keränen J, et al. Aluminum phosphate sealed alumina coating: characterization of microstructure. Mater Sci Eng A. 2002;323:1–8. DOI:10.1016/S0921-5093(01)01367-3.
- Sayyedan FS, Enayati MH, Hashempour M, et al. Synthesis and characterization of sol-gel derived non-stoichiometric aluminum phosphate coating. Surf Coat Technol. 2018;351:128–135. DOI:10.1016/j.surfcoat.2018.07.086.
- Peng S, Zeng Z, Han J, et al. Progress of anticorrosion of silane based sol-gel coating. Mater China. 2014;33. DOI:10.7502/j.issn.1674-3962.2014.02.02.
- van Kampen A, Kohlus R. Statistical modelling of coating layer thickness distributions: Influence of overspray on coating quality. Powder Technol. 2018;325:557–567. DOI:10.1016/j.powtec.2017.11.031.
- Messori M, Nobili A, Signorini C, et al. Mechanical performance of epoxy coated AR-glass fabric textile reinforced mortar: influence of coating thickness and formulation. Compos Part B Eng. 2018;149:135–143. DOI:10.1016/j.compositesb.2018.05.023.
- Bierwagen GP, Tallman DE. Choice and measurement of crucial aircraft coatings system properties. Prog Org Coat. 2001;41:201–216. DOI:10.1016/S0300-9440(01)00131-X.
- Jiang Q, Miao Q, Tong F, et al. Electrochemical corrosion behavior of arc sprayed Al-Zn-Si-RE coatings on mild steel in 3.5% NaCl solution. Oral Oncol. 2014;50:2713–2722. DOI:10.1016/S1003-6326(14)63402-6.
- Osborne JH, Blohowiak KY, Taylor SR, et al. Testing and evaluation of nonchromated coating systems for aerospace applications. Prog Org Coat. 2001;41:217–225. DOI:10.1016/S0300-9440(01)00132-1.
- Abreu CM, Izquierdo M, Keddam M, et al. Electrochemical behaviour of zinc-rich epoxy paints in 3% NaCl solution. Electrochim Acta. 1996;41:2405–2415. DOI:10.1016/0013-4686(96)00021-7.
- My A, Spectra I, Spectroscopy EI. EIS of organic coatings and paints. Coating. 2016;1:1–7.
- Gamry Instruments. Introduction to Electrochemical Impedance Spectroscopy; 2015. Available from: https://www.gamry.com/assets/Uploads/Basics-of-Electrochemical-Impedance-Spectroscopy.pdf.