Investigation of strain-hardening characteristics of cold-sprayed Al–Al₂O₃ coatings: a combined nanoindentation and expanding cavity models approach

References

• Pathak S, Saha GC. Sustainable development of cold spray coatings and 3D additive manufacturing components for repair/manufacturing applications: a critical review. Coatings. 2017;7:1–27. doi: 10.3390/coatings7080122
   Web of Science ®Google Scholar
• Tang J, Saha GC, Richter P, et al. Effects of post-spray heat treatment on hardness and wear properties of Ti-WC high-pressure cold spray coatings. J Therm Spray Technol. 2018;27:1153–1164. doi: 10.1007/s11666-018-0762-7
   Web of Science ®Google Scholar
• Tao Y, Xiong T, Sun C, et al. Effect of α-Al2O3 on the properties of cold sprayed Al/ α-Al2O3 composite coatings on AZ91D magnesium alloy. Appl Surf Sci. 2009;256:261–266. doi: 10.1016/j.apsusc.2009.08.012
   Web of Science ®Google Scholar
• Kalpakjian S, Schmid SR. Manufacturing processes for engineering materials. Hoboken (NJ): Pearson; 2017.
   Google Scholar
• Przondziono J, Hadasik E, Walke W, et al. Resistance to electrochemical corrosion of extruded magnesium alloy AZ31. Solid State Phenom. 2015;227:35–38. doi: 10.4028/www.scientific.net/SSP.227.35
   Google Scholar
• Gao X-L, Jing XN, Subhash G. Two new expanding cavity models for indentation deformations of elastic strain-hardening materials. Int J Solids Struct. 2006;43:2193–2208. doi: 10.1016/j.ijsolstr.2005.03.062
   Web of Science ®Google Scholar
• Johnson KL. The correlation of indentation experiments. J Mech Phys Solids. 1970;18:115–126. doi: 10.1016/0022-5096(70)90029-3
   Web of Science ®Google Scholar
• Oliver WC, Pharr GM. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7:1564–1583. doi: 10.1557/JMR.1992.1564
   Web of Science ®Google Scholar
• Fischer-Cripps AC. Nanoindentation. New York (NY): Springer; 2011.
   Google Scholar
• ASTM E384-17. Standard test method for microindentation hardness of materials. West Conshohocken (PA): American Society for Testing of Materials (ASTM) International; 2017.
   Google Scholar
• ASTM G133-16. Standard test method for linearly reciprocating ball-on-flat sliding wear. West Conshohocken (PA): American Society for Testing of Materials (ASTM) International; 2016.
   Google Scholar
• ASTM E2546-15. Standard practice for instrumented indentation testing. West Conshohocken (PA): American Society for Testing of Materials (ASTM) International; 2015.
   Google Scholar
• Schockley JM, Descartes S, Vo P, et al. The influence of Al2O3 particle morphology on the coating formation and dry sliding wear behavior of cold sprayed Al-Al2O3 composites. Surf Coat Technol. 2015;270:324–333. doi: 10.1016/j.surfcoat.2015.01.057
   Web of Science ®Google Scholar
• Norton MG, Suryanarayana C. X-Ray diffraction: a practical approach. New York (NY): Plenum Press; 1998.
   Google Scholar
• Santos PS, Santos HS, Toledo SP. Standard transition aluminas, electron microscopy studies. Mater Res. 2000;3:104–114. doi: 10.1590/S1516-14392000000400003
   Google Scholar
• Metson J. Production of alumina. In: Lumley R, editor. Fundamentals of aluminum metallurgy: production, processing, and applications. Amsterdam: Elsevier Science and Technology; 2010. p. 23–44.
   Google Scholar
• Spencer K, Fabijanic DM, Zhang M-X. The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys. Surf Coat Technol. 2009;204:336–344. doi: 10.1016/j.surfcoat.2009.07.032
   Web of Science ®Google Scholar
• Lee HY, Jung SH, Lee SY, et al. Correlation between Al2O3 particles and interface of Al-Al2O3 coatings by cold spray. Appl Surf Sci. 2005;252:1891–1898. doi: 10.1016/j.apsusc.2005.03.148
   Web of Science ®Google Scholar
• Alcan Engineered Products, Technical Datasheet: AA6056 [datasheet], Valais SA, 2006 – Available from: https://www.clintonaluminum.com/wp-content/uploads/2014/08/Grades-6056-plate-spec-pdf1.pdf
   Google Scholar
• Archard JF, Hirst W. The wear of metals under unlubricated conditions. Proc Royal Soc Lond. 1956;236:397–410.
   Google Scholar
• Champagne VK, Helfritch DJ, Drexler MD, et al. The effect of cold spray impact velocity on deposit hardness. Modell Simul Mater Sci Eng. 2010;18:065011. doi: 10.1088/0965-0393/18/6/065011
   Web of Science ®Google Scholar
• Rahimian M, Ehsani N, Parvin N, et al. The effect of sintering temperature and the amount of reinforcement on the properties of Al-Al2O3 composite. Mater Des. 2009;30:3333–3337. doi: 10.1016/j.matdes.2008.11.027
   Web of Science ®Google Scholar
• Rahimian M, Ehsani N, Parvin N, et al. The effect of particle size, sintering temperature and sintering time on the properties of Al-Al2O3 composites, made by powder metallurgy. J Mater Process Technol. 2009;209:5387–5393. doi: 10.1016/j.jmatprotec.2009.04.007
   Web of Science ®Google Scholar
• Callister WD, Rethwisch DG. Material science and engineering: an introduction. New York (NY): Wiley; 2018.
   Google Scholar
• Clausner A, Richter F. Determination of yield stress from nano-indentation experiments. Eur J Mech A/Solids. 2015;51:11–20. doi: 10.1016/j.euromechsol.2014.11.008
   Web of Science ®Google Scholar
• Giannakopoulos AE, Larsson P-L, Vestergaard R. Analysis of Vickers indentation. Int J Solids Struct. 1994;31:2679–2708. doi: 10.1016/0020-7683(94)90225-9
   Web of Science ®Google Scholar
• Larsson P-L, Giannakopoulos AE, Söderlund E, et al. Analysis of Berkovich indentation. Int J Solids Struct. 1996;33:221–248. doi: 10.1016/0020-7683(95)00033-7
   Web of Science ®Google Scholar