Frictional performance evaluation of sliding surfaces lubricated by zinc-oxide nano-additives

References

• Ali MKA, Xianjun H. Improving the tribological behavior of internal combustion engines via the addition of nanoparticles to engine oils. Nanotechnol Rev. 2015;4:347–358. doi: 10.1515/ntrev-2015-0031
   Web of Science ®Google Scholar
• Katafuchi T. Diesel engine oil composition. U.S. Patent No. 6,159,911. 2000 Dec 12.
   Google Scholar
• Seymour BT, Wright RAE, Parrott AC, et al. Poly(alkyl methacrylate) brush-grafted silica nanoparticles as oil lubricant additives: effects of alkyl pendant groups on oil dispersibility, stability, and lubrication property. ACS Appl Mater Interfaces. 2017;9:25038–25048. doi: 10.1021/acsami.7b06714
   PubMed Web of Science ®Google Scholar
• Ali MKA, Fuming P, Younus HA, et al. Fuel economy in gasoline engines using Al2O3/TiO2 nanomaterials as nanolubricant additives. Appl Energy. 2018;211:461–478. doi: 10.1016/j.apenergy.2017.11.013
   Web of Science ®Google Scholar
• Wu L, Zhang Y, Yang G, et al. Tribological properties of oleic acid-modified zinc oxide nanoparticles as the lubricant additive in poly-alpha olefin and diisooctyl sebacate base oils. RSC Adv. 2016;6:69836–69844. doi: 10.1039/C6RA10042B
   Web of Science ®Google Scholar
• Aldana PU. Tungsten disulfide nanoparticles as lubricant additives for the automotive industry [PhD dissertation]. Université de Lyon; 2016.
   Google Scholar
• Bhaumik S, Pathak S. Analysis of anti-wear properties of CuO nanoparticles as friction modifiers in mineral oil (460cSt viscosity) using pin-on-disk tribometer. Tribol Ind. 2015;37:196–203.
   Google Scholar
• Ali MKA, Xianjun H, Abdelkareem MA, et al. Friction and wear reduction mechanisms of the reciprocating contact interfaces using nanolubricant under different loads and speeds. ASME J Tribol. 2018;140(5):051606. doi: 10.1115/1.4039720
   Web of Science ®Google Scholar
• Ali MKA, Xianjun H, Mai L, et al. Reducing frictional power losses and improving the scuffing resistance in automotive engines using hybrid nanomaterials as nano-lubricant additives. Wear. 2016;364–365:270–281. doi: 10.1016/j.wear.2016.08.005
   Web of Science ®Google Scholar
• Sgroi MF, Asti M, Gili F, et al. Engine bench and road testing of an engine oil containing MoS2 particles as nano-additive for friction reduction. Tribol Int. 2017;105:317–325. doi: 10.1016/j.triboint.2016.10.013
   Web of Science ®Google Scholar
• Ali MKA, Xianjun H, Mai L, et al. Improving the tribological characteristics of piston ring assembly in automotive engines using Al2O3 and TiO2 nanomaterials as nano-lubricant additives. Tribol Int. 2016;103:540–554. doi: 10.1016/j.triboint.2016.08.011
   Web of Science ®Google Scholar
• Aldana PU, Vacher B, Le MT, et al. Action mechanism of WS2 nanoparticles with ZDDP additive in boundary lubrication regime. Tribol Lett. 2014;56:249–258. doi: 10.1007/s11249-014-0405-1
   Web of Science ®Google Scholar
• Jianhua Q, Yu Z, Lingling W, et al. Study on lubrication properties of modified nano ZnO in base oil. China Pet Process Petrochem Technol. 2011;13:14–18.
   Web of Science ®Google Scholar
• Gara L, Zou Q. Friction and wear characteristics of oil-based ZnO nanofluids. Tribol Trans. 2013;56:236–244. doi: 10.1080/10402004.2012.740148
   Web of Science ®Google Scholar
• Hsien WLY. Towards green lubrication in machining. Singapore: Springer; 2015.
   Google Scholar
• Battez AH, Rico JF, Arias AN, et al. The tribological behaviour of ZnO nanoparticles as an additive to PAO6. Wear. 2006;261:256–263. doi: 10.1016/j.wear.2005.10.001
   Web of Science ®Google Scholar
• Stachowiak GW, Batchelor AW. Adhesion and adhesive wear. Boston: Engineering Tribology, Butterworth-Heinemann, ABD; 2001; p. 533–553.
   Google Scholar
• Ali MKA, Makrahy MM, Xianjun H. Role of the friction layer formed on the brake lining surface in friction stabilization for automotive brakes. Surf Topogr Metrol Prop. 2019;7:015026. doi: 10.1088/2051-672X/ab0ea1
   Web of Science ®Google Scholar
• Hwang B, Lee S, Ahn J. Effect of oxides on wear resistance and surface roughness of ferrous coated layers fabricated by atmospheric plasma spraying. Mater Sci Eng A. 2002;335:268–280. doi: 10.1016/S0921-5093(01)01937-2
   Web of Science ®Google Scholar
• Ali MKA, Xianjun H. M50 matrix sintered with nanoscale solid lubricants shows enhanced self-lubricating properties under dry sliding at diferent temperatures. Tribol Lett. 2019. doi: 10.1007/s11249-019-1183-6
   Web of Science ®Google Scholar
• Cellard A, Garnier V, Fantozzi G, et al. Wear resistance of chromium oxide nanostructured coatings. Ceram Int. 2009;35:913–916. doi: 10.1016/j.ceramint.2008.02.022
   Web of Science ®Google Scholar
• Boshui C, Kecheng G, Jianhua F, et al. Tribological characteristics of monodispersed cerium borate nanospheres in biodegradable rapeseed oil lubricant. Appl Surf Sci. 2015;353:326–332. doi: 10.1016/j.apsusc.2015.06.107
   Web of Science ®Google Scholar
• Prasad S, Zabinski J. Tribological behavior of nanocrystalline zinc oxide films. Wear. 1997;203:498–506. doi: 10.1016/S0043-1648(96)07448-0
   Web of Science ®Google Scholar
• Dhoke SK, Khanna AS, Sinha TJM. Effect of nano-ZnO particles on the corrosion behavior of alkyd-based waterborne coatings. Prog Org Coat. 2009;64:371–382. doi: 10.1016/j.porgcoat.2008.07.023
   Web of Science ®Google Scholar
• Yang X, Zhang C, Li A, et al. Red fluorescent ZnO nanoparticle grafted with polyglycerol and conjugated RGD peptide as drug delivery vehicles for efficient target cancer therapy. Mater Sci Eng C. 2019;95:104–113. doi: 10.1016/j.msec.2018.10.066
   PubMed Web of Science ®Google Scholar
• Derjaguin B, Churaev N, Muller V. The Derjaguin—Landau—Verwey—Overbeek (DLVO) theory of stability of lyophobic colloids. Surf Forces. 1987: 293–310. doi: 10.1007/978-1-4757-6639-4_8
   Google Scholar
• ASTM Standard G181-11, Standard test method for conducting friction tests of piston ring and cylinder liner materials under lubricated conditions. 03.02 (2004).
   Google Scholar
• Baker CE, Theodossiades S, Rahnejat H, et al. Influence of in-plane dynamics of thin compression rings on friction in internal combustion engines. J Eng Gas Turbines Power. 2012;134:092801. doi: 10.1115/1.4006690
   Web of Science ®Google Scholar
• Ali MKA, Xianjun H, Abdelkareem MA. et al. Novel approach of the graphene nanolubricant for energy saving via anti-friction/wear in automobile engines. Tribol Int. 2018;124:209–229.
   Google Scholar
• Hamrock BJ, Dowson D. Ball bearing lubrication: the elastohydrodynamics of elliptical contacts; New York, Wiley-Interscience; 1981.
   Google Scholar
• Menezes PL, Ingole SP, Nosonovsky M., et al. Tribology for scientists and engineers. New York: Springer; 2013.
   Google Scholar
• Truhan JJ, Qu J, Blau PJ. A rig test to measure friction and wear of heavy duty diesel engine piston rings and cylinder liners using realistic lubricants. Tribol Int. 2005;38:211–218. doi: 10.1016/j.triboint.2004.08.003
   Web of Science ®Google Scholar
• Li W, Zhu J, Qi J. Application of nano-nickel catalyst in the viscosity reduction of Liaohe extra-heavy oil by aqua-thermolysis. J Fuel Chem Technol. 2007;35:176–180. doi: 10.1016/S1872-5813(07)60016-4
   Google Scholar
• Timofeeva EV, Routbort JL, Singh D. Particle shape effects on thermophysical properties of alumina nanofluids. J Appl Phys. 2009;106:014304. doi: 10.1063/1.3155999
   Web of Science ®Google Scholar
• Ali MKA, Xianjun H, Turkson RF, et al. An analytical study of tribological parameters between piston ring and cylinder liner in internal combustion engines. Proc Inst Mech Eng Part K J Multi-body Dyn. 2016;230:329–349.
   Google Scholar
• Ali MKA, Xianjun H, Elagouz A, et al. Minimizing of the boundary friction coefficient in automotive engines using Al2O3 and TiO2 nanoparticles. J Nanopart Res. 2016;18:377. doi: 10.1007/s11051-016-3679-4
   Web of Science ®Google Scholar
• Ali MKA, Xianjun H, Turkson RF, et al. Enhancing the thermophysical properties and tribological behaviour of engine oils using nano-lubricant additives. RSC Adv. 2016;6:77913–77924. doi: 10.1039/C6RA10543B
   Web of Science ®Google Scholar
• Verma DK, Kumar BK, Rastogi RB. Zinc oxide-and magnesium-doped zinc oxide-decorated nanocomposites of reduced graphene oxide as friction and wear modifiers. ACS Appl Mater Interfaces. 2018;11:2418–2430. doi: 10.1021/acsami.8b20103
   Web of Science ®Google Scholar
• Chen Z, Li L, Yao H, et al. Improved mechanical and tribological performance of bismaleimide composites with green synthesis of graphene/kapok-like ZnO. Polym Test. 2018;68:77–86. doi: 10.1016/j.polymertesting.2018.03.049
   Web of Science ®Google Scholar
• Morozov IG, Belousova O, Ortega D, et al. Structural, optical, XPS and magnetic properties of Zn particles capped by ZnO nanoparticles. J Alloy Compd. 2015;633:237–245. doi: 10.1016/j.jallcom.2015.01.285
   Web of Science ®Google Scholar