Plasma surface interaction of nitrogen plasma on AISI 304 steel

References

• Puric J, Dojcinovic IP, Astashynski VM, et al. Electric and thermodynamic properties of plasma flows created by a magnetoplasma compressor. Plasma Sources Sci Technol. 2004;13:74–84. doi: 10.1088/0963-0252/13/1/010
   Web of Science ®Google Scholar
• Gribkov VA, Monk G, Markowicz A, et al. ICTP-IAEA workshop on dense magnetised plasma and plasma diagnostics: an executive summary. Nucl Fusion. 2011;51:127001. doi: 10.1088/0029-5515/51/12/127001
   Web of Science ®Google Scholar
• Pimenov VN, Dyomina EV, Ivanov LI, et al. Damage of structural materials for fusion devices under pulsed ion and high temperature plasma beams. J Nucl Mater. 2002;307–311(1):95–99. doi: 10.1016/S0022-3115(02)00994-7
   Google Scholar
• Morozov AI. Principles of coaxial (quasi-)steady-state plasma accelerators. Sov J Plasma Phys. 1990;16(2):131.
   Google Scholar
• Hirai T, Ezato K, Majerus P. ITER relevant high heat flux testing on plasma facing surfaces. Mater Transact. 2005;46(3):412–424. doi: 10.2320/matertrans.46.412
   Web of Science ®Google Scholar
• Federici G, Zhitlukhin A, Arkhipov N, et al. Effects of ELMs and disruptions on ITER divertor armour materials. J Nucl Mater. 2005;337–339:684. doi: 10.1016/j.jnucmat.2004.10.149
   Web of Science ®Google Scholar
• Klimov NS, Podkovyrov VL, Kupriyanov IB, et al. Beryllium layer response to ITER-like ELM plasma pulses in QSPA-Be. Nucl Mater Energy. 2017;12:433–440. doi: 10.1016/j.nme.2017.01.012
   Web of Science ®Google Scholar
• Klimov N, Podkovyrov V, Zhitlukhin A, et al. Experimental study of PFCs erosion under ITER-like transient loads at plasma gun facility QSPA. J Nucl Mater. 2009;390–391:721. doi: 10.1016/j.jnucmat.2009.01.197
   Web of Science ®Google Scholar
• Tereshin VI, Bandura AN, Byrka OV, et al. Applications of powerful quasi-steady-state plasma accelerators for simulation of ITER transient heat loads on divertor surfaces. Plasma Phys Control Fusion. 2007;49:A231. doi: 10.1088/0741-3335/49/5A/S19
   Web of Science ®Google Scholar
• Bhuyan M, Mohanty SR, Rao CVS, et al. Plasma focus assisted damage studies on tungsten. Appl Surf Sci. 2013;264:674–680. doi: 10.1016/j.apsusc.2012.10.093
   Web of Science ®Google Scholar
• Rawat RS, Chew WM, Lee P, et al. Deposition of titanium nitride thin films on stainless steel-AISI 304 substrates using a plasma focus device. Surf Coat Technol. 2003;173(2):276–284. doi: 10.1016/S0257-8972(03)00628-5
   Web of Science ®Google Scholar
• Gribkov VA, Pimenov VN, Ivanov LI, et al. Interaction of high temperature deuterium plasma streams and fast ion beams with condensed materials in dense plasma focus device. J Phys D Appl Phys. 2003;36:1817–1825. doi: 10.1088/0022-3727/36/15/312
   Web of Science ®Google Scholar
• Hassan M, Qayyum A, Ahmad R, et al. Dense plasma focus ion-based titanium nitride coating on titanium. Nucl Inst Methods Phys Res B 2009;267:1911–1917. doi: 10.1016/j.nimb.2009.03.102
   Web of Science ®Google Scholar
• Feugeas J, Rico L, Nosei L, et al. Austenite modification of AISI 316L SS by pulsed nitrogen ion beams generated in dense plasma focus discharges. Surf Coat Technol. 2010;204:1193–1199. doi: 10.1016/j.surfcoat.2009.10.034
   Web of Science ®Google Scholar
• Borthakur S, Talukdar N, Neog NK, et al. Design of a coaxial plasma accelerator for fusion relevant material studies. Fus Eng Des. 2017;122:131–139. doi: 10.1016/j.fusengdes.2017.09.001
   Web of Science ®Google Scholar
• Borthakur S, Talukdar N, Neog NK, et al. 200 kJ pulsed power system for pulsed plasma device. IEEE Trans Plasma Sci. 2017;45:1769. doi: 10.1109/TPS.2017.2708728
   Web of Science ®Google Scholar
• Borthakur S, Talukdar N, Neog NK, et al. Study of plasma parameters in a pulsed plasma accelerator using triple Langmuir probe. Phys Plasmas. 2018;25:013532-1. doi: 10.1063/1.5009796
   Web of Science ®Google Scholar
• Javadi S, Ghoranneviss M, Rawat R, et al. Topographical, structural and hardness changes in surface layer of stainless steel-AISI 304 irradiated by fusion-relevant high energy deuterium ions and neutrons in a low energy plasma focus device. Surf Coatings Technol 2017;313:73. doi: 10.1016/j.surfcoat.2017.01.054
   Web of Science ®Google Scholar
• Balusamy T, Narayanan T, Ravichandran K, et al. Plasma nitriding of AISI 304 stanless steel: role of surface mechanical attrition treatment. Mater Charact. 2013;85:38. doi: 10.1016/j.matchar.2013.08.009
   Web of Science ®Google Scholar
• Baldenebro-Lopez FJ, Gomez-Esparza C, Corral-Higuera R, et al. Influence of size on the microstructure and mechanical properties of an AISI 304L stainless steel-a comparison between bulk and fibers. Materials. 2015;8(2):451. doi: 10.3390/ma8020451
   PubMed Web of Science ®Google Scholar
• Sha C, Lee C. Microstructure and surface treatment of 304 stainless steel for electronic packaging. J Electron Packag. 2011;133:21005-1.
   Web of Science ®Google Scholar
• Hayashi T, Morita T, Tiozawa Y, et al. Initiation of melting and evaporating of materials under plasma disruption. J Nucl Sci Eng 1993;30:1038.
   Google Scholar
• Gribkov V, Pimenov V, Roschupkin V, et al. Irradiation of austenitic steel 10Cr12Mn14Ni4AlMo and titanium alloy Ti-Al-V by pulsed streams of fast nitrogen ions and plasma in a dense plasma focus. Nukleonika. 2011;57:291.
   Web of Science ®Google Scholar
• Tereshin VI, Chebotarev VV, Garkusha IE, et al. Application of pulsed plasma accelerators for surface modification. Nukleonika. 2001;46(1):27.
   Web of Science ®Google Scholar