References
- Santana YY, Renault PQ, Sebastiani M, et al. Characterization and residual stresses of WC–Co thermally sprayed coatings. Surf Coat Technol. 2008;202:4560–4565. doi: 10.1016/j.surfcoat.2008.04.042
- Murthy JKN, Venkataraman B. Abrasive wear behaviour of WC–CoCr and Cr3C2 20(NiCr) deposited by HVOF and detonation spray processes. Surf Coat Technol. 2006;200:2642–2652. doi: 10.1016/j.surfcoat.2004.10.136
- Guilemany JM, Espallargas N, Suegama PH, et al. Comparative study of Cr3C2–NiCr coatings obtained by HVOF and hard chromium coatings. Corros Sci. 2006;48:2998–3013. doi: 10.1016/j.corsci.2005.10.016
- Sahraoui T, Guessasma S, Fenineche NE, et al. Friction and wear behaviour prediction of HVOF coatings and electroplated hard chromium using neural computation. Mater Lett. 2004;58:654–660. doi: 10.1016/j.matlet.2003.06.010
- Sahraoui T, Fenineche NE, Montavon G, et al. Alternative to chromium: characteristics and wear behavior of HVOF coatings for gas turbine shafts repair (heavy-duty). J Mater Process Technol. 2004;152:43–55. doi: 10.1016/j.jmatprotec.2004.02.061
- Picas JA, Forna A, Matthaus G. HVOF coatings as an alternative to hard chrome for pistons and valves. Wear. 2006;261:477–484. doi: 10.1016/j.wear.2005.12.005
- Natishana PM, Lawrencea SH, Fosterb RL, et al. Salt fog corrosion behavior of high-velocity oxygen-fuel thermal spray coatings compared to electrodeposited hard chromium. Surf Coat Technol. 2000;130:218–223. doi: 10.1016/S0257-8972(00)00671-X
- Sahraoui T, Guessasma S, Jeridane MA, et al. HVOF sprayed WC–Co coatings: microstructure, mechanical properties and friction moment prediction. Mater Des. 2010;31:1431–1437. doi: 10.1016/j.matdes.2009.08.037
- Fedrizzi L, Rossi S, Cristel R, et al. Corrosion and wear behaviour of HVOF cermet coatings used to replace hard chromium. Electrochim Acta. 2004;49:2803–2814. doi: 10.1016/j.electacta.2004.01.043
- Murthy JKN, Raob DS, Venkataraman B. Effect of grinding on the erosion behaviour of a WC–Co–Cr coating deposited by HVOF and detonation gun spray processes. Wear. 2001;249:592–600. doi: 10.1016/S0043-1648(01)00682-2
- Fedrizzi L, Valentinelli L, Rossi S, et al. Tribocorrosion behaviour of HVOF cermet coatings. Corros Sci. 2007;49:2781–2799. doi: 10.1016/j.corsci.2007.02.003
- Cho JE, Hwang SY, Kim KY. Corrosion behavior of thermal sprayed WC cermet coatings having various metallic binders in strong acidic environment. Surf Coat Technol. 2006;200:2653–2662. doi: 10.1016/j.surfcoat.2004.10.142
- Masoumi H, Safavi SM, Salehi M, et al. Effect of grinding on the residual stress and adhesion strength of HVOF thermally sprayed WC–10Co–4Cr coating. Mater Manuf Processes. 2014;29(9):1139–1151. doi: 10.1080/10426914.2014.930893
- Zoei MS, Sadeghi MH, Salehi M. Effect of grinding parameters on the wear resistance and residual stress of HVOF-deposited WC–10Co–4Cr coating. Surf Coat Technol. 2016;307:886–891. doi: 10.1016/j.surfcoat.2016.09.067
- Davis JR. Handbook of thermal spray technology. Ohio (OH): ASM International; 2004.
- Ji GC, Li CJ, Wang YY, et al. Microstructural characterization and abrasive wear performance of HVOF sprayed Cr3C2–NiCr coating. Surf Coat Technol. 2006;200:6749–6757. doi: 10.1016/j.surfcoat.2005.10.005
- Zhao L, Maurer M, Fischer F, et al. Influence of spray parameters on the particle in-flight properties and the properties of HVOF coating of WC-CoCr. Wear. 2004;257:41–46. doi: 10.1016/j.wear.2003.07.002
- Jacobs L, Hyland MM, De Bonte M. Comparative study of WC-cermet coatings sprayed via the HVOF and the HVAF process. Therm Spray Technol. 1998;7(2):213–218. doi: 10.1361/105996398770350954
- Xie M, Zhang S, Li M. Comparative investigation on HVOF sprayed carbide-based coatings. Appl Surf Sci. 2013;273:799–805. doi: 10.1016/j.apsusc.2013.03.010
- Maiti AK, Mukhopadhyay N, Raman R. Improving the wear behavior of WC-CoCr-based HVOF coating by surface grinding. J Mater Eng Perform. 2009;18(8):1060–1066. doi: 10.1007/s11665-009-9354-5
- Hernández LC, Ponce L, Fundora A, et al. Nanohardness and residual stress in TiN coatings. Materials (Basel). 2011;4:929–940. doi: 10.3390/ma4050929
- Valentinelli L, Valente T, Casadei F, et al. Mechanical and tribocorrosion properties of HVOF sprayed WC–Co coatings. Corros Eng Sci Techn. 2004;39:301–307. doi: 10.1179/174327804X13884
- Barmatov EB, Hughes T, Nagl T. 2014. NACE International corrosion Conference Series; 2014 Mar 9-13; San Antonio, Texas. USA: Paper; 4114.
- Wang LJ, Qiu PX, Liu Y, et al. Corrosion behavior of thermal sprayed WC cermet coatings containing metallic binders in saline environment. Trans Nonferrous Met Soc China. 2013;23:2611–2617. doi: 10.1016/S1003-6326(13)62775-2
- Hong S, Wu Y, Zheng Y, et al. Effect of spray parameters on the corrosion behavior of HVOF sprayed WC-Co-Cr coatings. J Mater Eng Perform. 2014;23:1434–1439. doi: 10.1007/s11665-014-0865-3
- Saenger R, Martin D, Gabrielli C. Electrochemical characterization of plasma sprayed WC–Co coatings by impedance techniques. Surf Coat Technol. 2005;194:335–343. doi: 10.1016/j.surfcoat.2004.08.187
- Liu C, Leyland A, Lyon S, et al. Electrochemical impedance spectroscopy of PVD-TiN coatings on mild steel and AISI316 substrates. Surf Coat Technol. 1995: 76–77: 615–622. doi: 10.1016/0257-8972(95)02544-8