References
- Fujiwara Y, Izaki M, Enomoto H, et al. Effects of hydroxycarboxylic acids on the electrodeposition of Fe-C alloys. Denki Kagaku. 1993;7:840–842. doi: 10.5796/electrochemistry.61.840
- Fujiwara Y, Nagayama T, Nakae A, et al. Electrodeposition of Fe-C alloys from baths containing dicarboxylic acids with a linear alkyl chain. J Electrochem Soc. 1996;143:2584–2590. doi: 10.1149/1.1837051
- Fujiwara Y, Izaki M, Enomoto H, et al. Optimization of bath composition for hard Fe-C alloy plating. J Appl Electrochem. 1998;28:855–862. doi: 10.1023/A:1003444610964
- Panayotova M. Deposition of Fe–C alloy on structural steel and cast iron for repair of worn machine parts. Surf Coat Technol. 2000;124:266–271. doi: 10.1016/S0257-8972(99)00647-7
- Müller T, Grimwood J, Bachmaier A, et al. Electrodeposition of Fe-C alloys from citrate baths: structure, mechanical properties, and thermal stability. Metals. 2018;8:1–13. doi: 10.3390/met8050363
- Nielsen JO, Møller P, Pantleon K. Electrodeposition of iron with co-deposition of carbon – on the nature of nanocrystalline Fe-C coatings. Metall Mater Trans A. 2019;50A:3785–3793. doi: 10.1007/s11661-019-05311-z
- Izaki M, Omi T. Structural characterization of martensitic iron-carbon alloy films electrodeposited from an iron(II) sulfate solution. Metall Mater Trans A. 1996;27A:483–486. doi: 10.1007/BF02648429
- Haseeb ASMA, Hayashi Y, Masuda M, et al. On the nature of the electrochemically synthesized hard Fe-0.96 mass pct C alloy film. Metall Mater Trans B. 2002;33B:921–927. doi: 10.1007/s11663-002-0076-4
- Miyamoto N, Sakamoto S, Tamura H, et al. Effect of carbon content on structural and mechanical properties of Fe-Co-C alloy electrodeposited from aqueous solutions. J Electrochem Soc. 2005;152:C488–C492. doi: 10.1149/1.1931468
- Haseeb ASMA, Nishida T, Masuda M, et al. Mössbauer investigation on electrodeposited Fe-C and Fe-Ni-C alloys. Scr Mater. 2001;44:519–523. doi: 10.1016/S1359-6462(00)00629-1
- Haseeb ASMA, Arita M, Hayashi Y. Thermal decomposition study of electrodeposited Fe-C and Fe-Ni-C alloys by differential scanning calorimetry. J Mater Sci. 2001;6:4739–4743. doi: 10.1023/A:1017931106376
- Genzel C, Denks IA, Gibmeier J, et al. The materials science synchrotron beamline EDDI for energy-dispersive diffraction analysis. Nucl Instrum Methods Phys Res A. 2007;578:23–33. doi: 10.1016/j.nima.2007.05.209
- Cheng L, Brakman CM, Korevaar BM, et al. The tempering of iron-carbon martensite; dilatometric and calorimetric analysis. Metall Trans A. 1988;19A:2415–2426. doi: 10.1007/BF02645469
- Campbell AS, Schwertmann U, Campbell PA. Formation of cubic phases on ferrihydrite heating. Clay Miner. 1997;32:615–622. doi: 10.1180/claymin.1997.032.4.11
- Chipman J. Thermodynamics and phase diagram of the Fe-C system. Metall Trans. 1972;3:55–64. doi: 10.1007/BF02680585
- Yakel HL. Crystal structures of stable and metastable iron-containing carbides. Int Met Rev. 1985;30:17–40. doi: 10.1179/imr.1985.30.1.17
- Wriedt HA. The Fe-O (iron-oxygen) system. J Phase Equilib. 1991;12:170–200. doi: 10.1007/BF02645713