References
- Ma G, Xu B, Wang H, et al. Research on the microstructure and space tribology properties of electric-brush plated Ni/MoS2–C composite coating. Surf Coat Technol. 2013;221:142–149. doi: 10.1016/j.surfcoat.2013.01.039
- Zhou YY, Ma GZ, Wang HD, et al. Fabrication and characterization of supersonic plasma sprayed Fe-based amorphous metallic coatings. Mater Des. 2016;110:332–339. doi: 10.1016/j.matdes.2016.08.003
- Buytoz S, Orhan A, Gur AK, et al. Microstructural Development of Fe–Cr–C and B4C powder alloy coating on stainless steel by plasma-transferred arc weld surfacing. Arabian J Sci Eng. 2013;38(8):2197–2204. doi: 10.1007/s13369-013-0599-9
- Lu J, Peng Z, Ma M, et al. Cocrcufemnni high-entropy alloy coating prepared by plasma cladding on Q235 steel. Heat Treat Met. 2016;41(4):51–54.
- Liu YF, Han JM, Li RH, et al. Microstructure and dry-sliding wear resistance of PTA clad (Cr, Fe)7C3/γ-Fe ceramal composite coating. Appl Surf Sci. 2006;252(20):7539–7544. doi: 10.1016/j.apsusc.2005.09.008
- Cheng JB, Xu BS, Liang XB, et al. Microstructure and mechanical characteristics of iron-based coating prepared by plasma transferred arc cladding process. Mater Sci Eng A. 2008;492(1):407–412. doi: 10.1016/j.msea.2008.03.033
- Deuis RL, Yellup JM, Subramanian C. Metal-matrix composite coatings by PTA surfacing. Comp Sci Technol. 1998;58(2):299–309. doi: 10.1016/S0266-3538(97)00131-0
- Xia P, Han G, Xie K. Effect of compositions on the microstructure and properties of plasma clad NiAl coating. Metals Mater Int. 2016;22(3):424–429. doi: 10.1007/s12540-016-5540-9
- Liu YF, Zhou YL, Zhang Q, et al. Microstructure and dry sliding wear behavior of plasma transferred arc clad Ti5Si3 reinforced intermetallic composite coatings. J Alloys Compd. 2014;591(591):251–258. doi: 10.1016/j.jallcom.2013.12.225
- Jin G, Li Y, Xiao Q, et al. Effect of magnetic field on properties and element distribution of Ni-based WC composite coatings. Mater Manuf Processes. 2016;31(9):1253–1260. doi: 10.1080/10426914.2015.1070428
- Yang W, Hu A, Qi J, et al. Strain-enhanced transformation and ferrite dynamic recrystallization of plain low carbon steel in successive hot deformation. Chinese J Light Scatter. 2000;36:1192–1196.
- Zhang Q, Yao J, Kovalenko VS, et al. Productivity and quality of cladding with a coaxial supply of laser radiation and a gas–powder mixture (Jet). Surface Eng Appl Electrochem. 2015;51(4):339–346. doi: 10.3103/S1068375515040158
- Matsukawa Y, Kitayama S, Murakami K, et al. Reassessment of oxidation-induced amorphization and dissolution of Nb precipitates in Zr–Nb nuclear fuel cladding tubes. Acta Mater. 2017;127:153–164. doi: 10.1016/j.actamat.2017.01.032
- Stanciu EM, Pascu A, Voiculescu I, et al. Dual coating laser cladding of NiCrBSi and Inconel 718. Mater Manuf Process. 2016;32(12):1556–1564. doi: 10.1080/10426914.2015.1103866
- Vijayalakshmi U, Chellappa M, Anjaneyulu U, et al. Influence of coating parameter and sintering atmosphere on the corrosion resistance behavior of electrophoretically deposited composite coatings. Adv Manufac Process. 2016;31(1):95–106. doi: 10.1080/10426914.2015.1070424
- Li Y, Cui X, Jin G, et al. Interfacial bonding properties between cobalt-based plasma cladding layer and substrate under tensile conditions. Mater Des. 2017;123:54–63. doi: 10.1016/j.matdes.2017.03.035
- Miura H, Aoyama H, Sakai T. Effect of grain-boundary misorientation on dynamic recrystallization of Cu–Si bicrystals. J Jpn Inst Met. 1994;58(3):267–275. doi: 10.2320/jinstmet1952.58.3_267
- Miura H, Sakai T, Mogawa R, et al. Nucleation of dynamic recrystallization and variant selection in copper bicrystals. Philos Mag. 2007;87(27):4197–4209. doi: 10.1080/14786430701532780
- Matsumoto H, Liu B, Lee SH, et al. Frequent occurrence of discontinuous dynamic recrystallization in Ti–6Al–4V alloy with α′ martensite starting microstructure. Metall Mater Trans A. 2013;44(7):3245–3260. doi: 10.1007/s11661-013-1655-5
- Zhang ZX, Qu SJ, Feng AH, et al. Hot deformation behavior of Ti–6Al–4V alloy: effect of initial microstructure. J Alloys Compd. 2017;718:170–181. doi: 10.1016/j.jallcom.2017.05.097
- Tan YC, Cui ZQ. Metallurgy and heat treatment. Beijing, China: China Machine Press; 2007.
- Jin G, Li Y, Cui X, et al. Characterization of high-temperature mechanical properties of plasma-cladded coatings with thermo-mechanical coupling. Mater Charact. 2018;145:196–204. doi: 10.1016/j.matchar.2018.08.048
- Han L, Meng Q, Ren S. Effect of Nb on stacking-fault energy in Ni-base superalloy. J Iron Steel Res Int. 1984;4:305–308.