References
- Rathod WS, Khanna AS, Karthikeyan J, et al. Oxidation and corrosion behaviour of CoNiCrAlY bond coats. Surf Eng. 2014;30:432–442. doi:10.1179/1743294414Y.0000000255.
- Fellah M, Labaïz M, Assala O, et al. Tribological behaviour of AISI 316L stainless steel for biomedical applications. Tribol - Mater Surfaces Interfaces. 2013;7:135–149. doi:10.1179/1751584X13Y.0000000032.
- Fauchais P, Vardelle A. Thermal sprayed coatings used against corrosion and Corrosive wear. Adv Plasma Spray Appl. 2012: 3–39. doi:10.5772/34448.
- Rukhande S, Rathod WS, Bhosale D. Tribological behaviour of thermally sprayed coatings:A review. SSRN. 2018: 13–16. doi:10.2139/ssrn.3323697.
- Liu L, Xu H, Xiao J, et al. Effect of heat treatment on structure and property evolutions of atmospheric plasma sprayed NiCrBSi coatings. Surf Coatings Technol. 2017;325:548–554. doi:10.1016/j.surfcoat.2017.07.011.
- Miguel JM, Guilemany JM, Vizcaino S. Tribological study of NiCrBSi coating obtained by different processes. Tribol Int. 2003; doi:10.1016/S0301-679X(02)00144-5.
- Garrido MA, Rico A, Gómez MT, et al. Tribological and oxidative behavior of thermally sprayed NiCrBSi coatings. J Therm Spray Technol. 2017;26:517–529. doi:10.1007/s11666-016-0521-6.
- Otsubo F, Era H, Kishitake K. Structure and phases in nickel-base self-fluxing alloy coating containing high chromium and boron. J Therm Spray Technol. 2000;9:107–113. doi:10.1361/105996300770350131.
- Simunovic K, Slokar L, Havrlisan S. SEM/EDS investigation of one-step flame sprayed and fused Ni-based self-fluxing alloy coatings on steel substrates. Philos Mag. 2017;97:248–268. doi:10.1080/14786435.2016.1257167.
- Kaiming W, Yulong L, Hanguang F, et al. A study of laser cladding NiCrBSi/Mo composite coatings. Surf Eng. 2018;34:267–275. doi:10.1080/02670844.2016.1259096.
- Yang XC, Li GL, Wang HD, et al. Effect of flame remelting on microstructure and wear behaviour of plasma sprayed NiCrBSi-30%Mo coating. Surf Eng. 2018;34:181–188. doi:10.1080/02670844.2016.1226053.
- Ping X, Sun S, Wang F, et al. Effect of Cr3C2 addition on the microstructure and properties of laser cladding NiCrBSi coatings. Surf Rev Lett. 2019;26; doi:10.1142/S0218625X18502074.
- Singh S, Kaur M. Mechanical and microstructural properties of NiCrFeSiBC/Cr3C2 composite coatings – part I. Surf Eng. 2016;32:464–474. doi:10.1179/1743294414Y.0000000416.
- Edward Anand E, Natarajan S. High-temperature erosion behaviour of plasma-sprayed NiCrBSi–graphite coatings. Surf Eng. 2018;34:783–790. doi:10.1080/02670844.2018.1467143.
- Singh G, Kaur M. High-temperature wear behaviour of HVOF sprayed 65% (NiCrSiFeBC)−35% (WC–Co) coating. Surf Eng. 2019;0:1–17. doi:10.1080/02670844.2019.1639932.
- Praveen AS, Sarangan J, Suresh S, et al. Optimization and erosion wear response of NiCrSiB/WC-Co HVOF coating using Taguchi method. Ceram Int. 2016;42:1094–1104. doi:10.1016/j.ceramint.2015.09.036.
- Navas C, Colaço R, de Damborenea J, et al. Abrasive wear behaviour of laser clad and flame sprayed-melted NiCrBSi coatings. Surf Coatings Technol. 2006;200:6854–6862. doi:10.1016/j.surfcoat.2005.10.032.
- Bhosale DG, Rathod WS, Rukhande SW. Wear and oxidation behaviour of tungsten carbide based coatings : A review, SSRN. (2018). https://ssrn.com/abstract=3323700.
- Xiao J-K, Wu Y-Q, Zhang W, et al. Microstructure, wear and corrosion behaviors of plasma sprayed NiCrBSi-Zr coating. Surf Coatings Technol. 2018; doi:10.1016/J.SURFCOAT.2018.12.114.
- Winkelmann H, Badisch E, Kirchgaßner M, et al. Wear mechanisms at high temperatures. Part 1: Wear mechanisms of different Fe-based Alloys at elevated temperatures. Tribol Lett. 2009;34:155–166. doi:10.1007/s11249-009-9421-y.
- Gómez-del Río T, Garrido MA, Fernández JE, et al. Influence of the deposition techniques on the mechanical properties and microstructure of NiCrBSi coatings. J Mater Process Technol. 2008;204:304–312. doi:10.1016/j.jmatprotec.2007.11.042.
- Axén N, Hogmark S, Jacobson S. Friction and wear measurement techniques. Mod Tribol Handb Vol One Princ Tribol. 2000: 493–510.
- Yang X, Zhang J, Li G. Cavitation erosion behaviour and mechanism of HVOF-sprayed NiCrBSi–(Cr3C2 –NiCr) composite coatings. Surf Eng. 2018;34:211–219. doi:10.1080/02670844.2016.1258770.
- Yin B, Zhou HD, Chen JM, et al. Microstructure and high temperature sliding wear behaviour of laser remelted NiCrBSi/35(WC-12Ni) composite coating. Surf Eng. 2011;27:458–463. doi:10.1179/026708410X12687356948517.
- Rukhande SW, Rathod WS, Bhosale DG. Tribo-Behaviour of Plasma and HVOF Sprayed NiCrSiBFe Coating on SS 316L. In: Mech. Power Transm. (ICMPT 2019), IIT Madras, Chennai, India, 2019: p. 14.
- Ping XL, Fu HG, Sun ST, et al. Microstructure and performance of Nb-bearing Ni60A-Cr3C2 coatings manufactured by laser cladding. Surf Eng. 2019;0:1–13. doi:10.1080/02670844.2019.1631510.
- Sundararajan G, Roy M, Das DK. Tribological behaviour of ion deposited ZrN coatings on mild steel substrate. Surf Eng. 1997;13:219–222. doi:10.1179/sur.1997.13.3.219.
- Yoganandh J, Natarajan S, Babu SPK. Erosion behaviour of NiCrBSi coating under mining conditions. Surf Eng. 2014;30:71–77. doi:10.1179/1743294413Y.0000000191.
- Grewal HS, Singh H, Agrawal A. Understanding liquid impingement erosion behaviour of nickel-alumina based thermal spray coatings. Wear. 2013;301:424–433. doi:10.1016/j.wear.2013.01.063.
- Bolelli G, Berger LM, Börner T, et al. Sliding and abrasive wear behaviour of HVOF- and HVAF-sprayed Cr3C2-NiCr hardmetal coatings. Wear. 2016;358–359:32–50. doi:10.1016/j.wear.2016.03.034.
- Zórawski W, Skrzypek SJ. Tribological properties of plasma and HVOF-sprayed NiCrBSi-Fe2O3composite coatings. Surf Coatings Technol. 2013;220:282–289. doi:10.1016/j.surfcoat.2012.09.057.