References
- Kovendhan M, Kang H, Jeong S, et al. Study of stainless steel electrodes after electrochemical analysis in sea water condition. Environ Res. 2019 Jun;173:549–555. doi:10.1016/j.envres.2019.03.069. PubMed PMID: 31004909. doi: 10.1016/j.envres.2019.03.069
- Saha SK, Park YJ, Kim JW, et al. Self-organized honeycomb-like nanoporous oxide layer for corrosion protection of type 304 stainless steel in an artificial seawater medium. J Mol Liq. 2019;296:111823. doi:10.1016/j.molliq.2019.111823.
- Chen J, Zhang Q, Li Q-A, et al. Corrosion and tribocorrosion behaviors of AISI 316 stainless steel and Ti6Al4 V alloys in artificial seawater. Transact Nonferrous Metals Soc China. 2014;24(4):1022–1031. doi:10.1016/s1003-6326(14)63157-5.
- Kim J, Sankara Narayanan TSN, Park HW. Reducing the pitting susceptibility of AISI 304 stainless steel using a hybrid treatment of high-power diode laser and large pulsed electron beam irradiation. Surf Coat Technol. 2019. doi:10.1016/j.surfcoat.2019.125124.
- Novelli M, Bocher P, Grosdidier T. Effect of cryogenic temperatures and processing parameters on gradient-structure of a stainless steel treated by ultrasonic surface mechanical attrition treatment. Mater Charact. 2018;139:197–207. doi:10.1016/j.matchar.2018.02.028.
- Wu Y, Guelorget B, Sun Z, et al. Characterization of gradient properties generated by SMAT for a biomedical grade 316L stainless steel. Mater Charact. 2019;155(109788). doi:10.1016/j.matchar.2019.109788.
- Bahl S, Suwas S, Ungàr T, et al. Elucidating microstructural evolution and strengthening mechanisms in nanocrystalline surface induced by surface mechanical attrition treatment of stainless steel. Acta Mater. 2017;122:138–151. doi:10.1016/j.actamat.2016.09.041.
- Zhou J, Retraint D, Sun Z, et al. Comparative study of the effects of surface mechanical attrition treatment and conventional shot peening on low cycle fatigue of a 316L stainless steel. Surf Coat Technol. 2018;349:556–566. doi:10.1016/j.surfcoat.2018.06.041.
- Bahl S, Shreyas P, Trishul MA, et al. Enhancing the mechanical and biological performance of a metallic biomaterial for orthopedic applications through changes in the surface oxide layer by nanocrystalline surface modification. Nanoscale. 2015 May 7;7(17):7704–7716. doi:10.1039/c5nr00574d. PubMed PMID: 25833718. doi: 10.1039/C5NR00574D
- Wu XL, Yang MX, Yuan FP, et al. Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility. Acta Mater. 2016;112:337–346. doi:10.1016/j.actamat.2016.04.045.
- Chemkhi M, Retraint D, Roos A, et al. The effect of surface mechanical attrition treatment on low temperature plasma nitriding of an austenitic stainless steel. Surf Coat Technol. 2013;221:191–195. doi:10.1016/j.surfcoat.2013.01.047.
- Balusamy T, Sankara Narayanan TSN, Ravichandran K, et al. Effect of surface mechanical attrition treatment (SMAT) on pack boronizing of AISI 304 stainless steel. Surf Coat Technol. 2013;232:60–67. doi:10.1016/j.surfcoat.2013.04.053.
- Gupta RK, Birbilis N. The influence of nanocrystalline structure and processing route on corrosion of stainless steel: a review. Corros Sci. 2015;92:1–15. doi:10.1016/j.corsci.2014.11.041.
- Olugbade T, Lu J. Characterization of the corrosion of nanostructured 17-4 PH stainless steel by surface mechanical attrition treatment (SMAT). Anal Lett. 2019;52(16):2454–2471. doi:10.1080/00032719.2019.1611842.
- Li N, Shi S, Luo J, et al. Effects of surface nanocrystallization on the corrosion behaviors of 316L and alloy 690. Surf Coat Technol. 2017;309:227–231. doi:10.1016/j.surfcoat.2016.11.052.
- Olugbade T, Liu C, Lu J. Enhanced passivation layer by Cr diffusion of 301 stainless steel facilitated by SMAT. Adv Eng Mater. 2019;21(8):1900125. doi:10.1002/adem.201900125.
- Balusamy T, Kumar S, Sankara Narayanan TSN. Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel. Corros Sci. 2010;52(11):3826–3834. doi:10.1016/j.corsci.2010.07.004.
- Lu K, Lu J. Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment. Mater Sci Eng A. 2004;375-377:38–45. doi:10.1016/j.msea.2003.10.261.
- Azadmanjiri J, Berndt CC, Kapoor A, et al. Development of surface nano-crystallization in alloys by surface mechanical attrition treatment (SMAT). Crit Rev Solid State Mater Sci. 2015;40(3):164–181. doi:10.1080/10408436.2014.978446.
- Guo H-Y, Xia M, Wu Z-T, et al. Nanocrystalline-grained tungsten prepared by surface mechanical attrition treatment: microstructure and mechanical properties. J Nucl Mater. 2016;480:281–288. doi:10.1016/j.jnucmat.2016.08.032.
- Samih Y, Beausir B, Bolle B, et al. In-depth quantitative analysis of the microstructures produced by surface mechanical attrition treatment (SMAT). Mater Charact. 2013;83:129–138. doi:10.1016/j.matchar.2013.06.006.
- Benafia S, Retraint D, Yapi Brou S, et al. Influence of surface mechanical attrition treatment on the oxidation behaviour of 316L stainless steel. Corros Sci. 2018;136:188–200. doi:10.1016/j.corsci.2018.03.007.
- Arifvianto B S, Mahardika M, et al. Effect of surface mechanical attrition treatment (SMAT) on microhardness, surface roughness and wettability of AISI 316L. Mater Chem Phys. 2011;125(3):418–426. doi:10.1016/j.matchemphys.2010.10.038.
- Bajda S, Dymek S, Krzyzanowski M, et al. Characterization of nanocrystallised multilayered metallic materials produced by the SMAT followed by constrained compression. Mater Charact. 2018;145:250–257. doi:10.1016/j.matchar.2018.08.046.
- Zhou J, Sun Z, Kanouté P, et al. Effect of surface mechanical attrition treatment on low cycle fatigue properties of an austenitic stainless steel. Int J Fatigue. 2017;103:309–317. doi:10.1016/j.ijfatigue.2017.06.011.
- Chen X, Li Y, Zhu Y, et al. Improved corrosion resistance of 316LN stainless steel performed by rotationally accelerated shot peening. Appl Surf Sci. 2019;481:1305–1312. doi:10.1016/j.apsusc.2019.03.256.
- Zheng ZJ, Gao Y, Gui Y, et al. Corrosion behaviour of nanocrystalline 304 stainless steel prepared by equal channel angular pressing. Corros Sci. 2012;54:60–67. doi:10.1016/j.corsci.2011.08.049.
- Ding L, Torbati-Sarraf H, Poursaee A. The influence of the sandblasting as a surface mechanical attrition treatment on the electrochemical behavior of carbon steel in different pH solutions. Surf Coat Technol. 2018;352:112–119. doi:10.1016/j.surfcoat.2018.08.013.
- Pan C, Liu L, Li Y, et al. Passive film growth mechanism of nanocrystalline 304 stainless steel prepared by magnetron sputtering and deep rolling techniques. Electrochim Acta. 2011;56(22):7740–7748. doi:10.1016/j.electacta.2011.05.106.
- Gupta RK, Raman RS, Koch CC, et al. Effect of nanocrystalline structure on the corrosion of a Fe20Cr alloy. Int J Electrochem Sci. 2013;8:6791–6806.