References
- Dua LY, Wang SQ, Du Y, et al. Deposition of CVD-TiCN and TiAlN coatings guided with thermodynamic calculations. Int J Mater Res. 2018;109:277–283. doi:10.3139/146.111613.
- Zhang J, Lou J, He H, et al. Comparative investigation on the tribological performances of TiN, TiCN, and Ti-DLC film-coated stainless steel. JOM. 2019;71:4872–4879. doi:10.1007/s11837-019-03718-y.
- Silva FJG, Martinho RP, Martins C, et al. Machining GX2CrNiMoN26-7-4 DSS alloy: wear analysis of TiAlN and TiCN/Al2O3/TiN coated carbide tools behavior in rough end milling operations. Coatings. 2019;9:392. doi:10.3390/coatings9060392.
- Landek D, Jakovljević S, Alar V, et al. Effect of steel substrate on the corrosion properties of a gradient multilayer TiN/TiCN coating deposited by the PACVD process. Mater Corros. 2019;70:307–318. doi:10.1002/maco.201810358.
- Ji J, Niu Y, Wu J, et al. Improvement of properties of TiN coating by optimising microstructural design. Surf Eng. 2014;30:36–40. doi:10.1179/1743294413Y.0000000177.
- Siow PC, Ghani JA, Rizal M, et al. Surface characterisation of TiCxN1-x coatings processed by cathodic arc physical vapour deposition: XPS and XRD analysis. Surf Interface Anal. 2019;51:611–617. doi:10.1002/sia.6626.
- Staia MH, Trocelis A, Zairi A, et al. Assessment of the mechanical and tribological performance of a ZrN PVD coating. Surf Eng. 2017;35:491–500. doi:10.1080/02670844.2017.1414766.
- Cheng H, Garcia-Araez N, Hector AL, et al. Synthesis of hard carbon-TiN/TiC composites by reacting cellulose with TiCl4 followed by carbothermal nitridation/reduction. Inorg Chem. 2019;58:5776–5786. doi:10.1021/acs.inorgchem.9b00116.
- Wang D, Zhao J, Cao Y, et al. Wear behavior of an Al2O3/TiC/TiN micro-nano-composite ceramic cutting tool in high-speed turning of ultra-high-strength steel 300 M. Int J Adv Manuf Technol. 2016;87:3301–3306. doi:10.1007/s00170-016-8737-7.
- Li Y, Zheng GM, Zhang X, et al. Cutting force, tool wear and surface roughness in high-speed milling of high-strength steel with coated tools. J Mech Sci Technol. 2019;33:5393–5398. doi:10.1016/j.ceramint.2017.12.074 doi: 10.1007/s12206-019-1033-3
- Bao MD, Xu XB, Zhang HJ, et al. Tribological behavior at elevated temperature of multilayer TiCN/TiC/TiN hard coatings produced by chemical vapor deposition. Thin Solid Films. 2011;520:833–836. doi:10.1016/j.tsf.2011.04.165.
- Siow PC, Ghani JA, Rizal M, et al. The study on the properties of TiCxN1-x coatings processed by cathodic arc physical vapour deposition. Tribol Mater Surf Inter. 2019;13:58–66. doi:10.1080/17515831.2019.1580447.
- Vereschaka A, Grigoriev S, Sitnikov N, et al. Influence of the thickness of multilayer composite nano-structured coating Ti-TiN-(Ti, Al, Si)N on the tool life of metal-cutting tools and the nature of wear. Coatings. 2019;9:730. doi:10.3390/coatings9110730.
- Polcar T, Novak R, Široky P. The tribological characteristics of TiCN coating at elevated temperatures. Wear. 2006;260:40–49. doi:10.1016/j.wear.2004.12.031.
- Shan L, Wang YX, Li JL, et al. Tribological behaviours of PVD TiN and TiCN coatings in artificial seawater. Surf Coat Technol. 2013;226:40–50. doi:10.1016/j.surfcoat.2013.03.034.
- Gong MF, Chen J, Deng X, et al. Sliding wear behavior of TiAlN and AlCrN coatings on a unique cemented carbide substrate. Int J Refr Metals Hard Mater. 2017;69:209–214. doi:/10.1016/j.ijrmhm.2017.08.003.
- Paiva Jr JMF, Amorim FL, Soares Jr PC, et al. Tribological behavior of superduplex stainless steel against PVD hard coatings on cemented carbide. Int J Adv Manuf Technol. 2016;86:9–12. doi:10.1007/s00170-016-9514-3.
- Feng ZQ, Tang MQ, Liu YQ, et al. In situ synthesis of TiC-TiN-reinforced Fe-base plasma cladding coatings. Surf Eng. 2017;34:309–315. doi:10.1080/02670844.2017.1349362.
- Yang Y, Guo JH, Yan MF, et al. Improvement of wear resistance for carburized steel by Ti depositing and plasma nitriding. Surf Eng. 2016;34:132–138. doi:10.1080/02670844.2016.1231863.
- Rasool G, Mridha S, Stack MM. Mapping wear mechanisms of TiC/Ti composite coatings. Wear. 2015;328–329:498–508. doi:10.1016/j.wear.2015.03.022.
- Wang JY, Wang WZ, Jia JH. The oxidation resistance and tribological properties of Ni-based composites with in situ/ex situ Al2O3 and TiC ceramic phases at high temperatures. J Mater Res. 2016;31:3262–3271. doi:10.1557/jmr.2016.350.
- Zhu L, He JN, Yan DR, et al. Oxidation behavior of titanium carbonitride coating deposited by atmospheric plasma spray synthesis. J Therm Spray Tech. 2017;26:1701–1707. doi:10.1007/s11666-017-0620-z.
- de Faria DLA, Venâncio Silva S, de Oliveira MT. Raman microspectroscopy of some iron oxides and oxyhydroxides. J Raman, Spectrosc. 1997;28:873–878. doi:10.1002/(SICI)1097-4555(199711)28:11<873::AID-JRS177>3.0.CO;2-B.
- Vásquez GC, Maestre D, Cremades A, et al. Assessment of the Cr doping and size effects on the Raman-active modes of rutile TiO2 by UV/visible polarized Raman spectroscopy. J Raman Spectrosc. 2017;48:847–854. doi:10.1002/jrs.5133.
- Kara L, Özkan D, Yağci MB, et al. Friction and wear behaviors of TiN coatings under dry and vacuum conditions. Tribology Transactions (Tribology T). 2019;62:362–373. doi:10.1080/10402004.2018.1559385.
- Li HT, Rong SF, Sun PF, et al. Microstructure, residual stress, corrosion and wear resistance of vacuum annealed TiCN/TiN/Ti films deposited on AZ31. Metals (Basel). 2016;7:5. doi:10.1007/s11998-008-9105-9 doi: 10.3390/met7010005
- Ye FX, Zhao HJ, Tian XB. The elevated-temperature wear properties of TiN and TiN/W2N coatings. Mater Res Express. 2018;5:10. doi:10.1088/2053-1591/aada3b.
- Çomaklı O, Yetim T, Çelik A. The effect of calcination temperatures on wear properties of TiO2 coated CP-Ti. Surf Coat Technol. 2014;246:34–39. doi:10.1016/j.surfcoat.2014.02.059.
- Dhiflaoui H, Kaouther K, Larbi ABC. Wear behavior and mechanical properties of TiO2 coating deposited electrophoretically on 316L stainless steel. J Tribol May. 2018;140:031603. doi:10.1115/1.4038102.