Microstructures and wear-resistance of WC-reinforced high entropy alloy composite coatings by plasma cladding: effect of WC morphology

References

• Tan DQ, Yang XQ, He Q, et al. Impact-sliding wear properties of PVD CrN and WC/C coatings. Surf Eng. 2019;1–12. doi:10.1080/02670844.2019.1682818.
   Web of Science ®Google Scholar
• Farokhian G, Salehnasab B, Zat Ajam H, et al. Influence of WC–20Co–1Ni coating by HVOF on lifespan of the down hole drilling motors. Surf Eng. 2017;34(10):771–782. doi: 10.1080/02670844.2017.1278643
   Web of Science ®Google Scholar
• Tillmann W, Hagen L, Kokalj D. Embedment of eutectic tungsten carbides in arc sprayed steel coatings. Surf Coat Tech. 2017;331:153–162. doi: 10.1016/j.surfcoat.2017.10.044
   Web of Science ®Google Scholar
• Singh J, Thakur L, Angra S. A study of tribological behaviour and optimization of WC-10Co-4Cr cladding. Surf Eng. 2020;1–10. doi:10.1080/02670844.2020.1745367.
   Web of Science ®Google Scholar
• Chang QM, Duan XH. Application of plasma spraying technology in aeroengine. Metal Working. 2008;18:30–32.
   Google Scholar
• Savarimuthu AC, Taber HF, Megat I, et al. Sliding wear behavior of tungsten carbide thermal spray coatings for replacement of chromium electroplate in aircraft applications. J Therm Spray Tech. 2001;10:502–510. doi: 10.1361/105996301770349286
   Web of Science ®Google Scholar
• Demetriou MD, Ghoniem NM, Lavine AS. Kinetic modeling of phase selection during non-equilibrium solidification of a tungsten-carbon system. Acta Mater. 2002;50:1421–1432. doi: 10.1016/S1359-6454(01)00447-5
   Web of Science ®Google Scholar
• Rachidi R, Elkihel B, Delaunois F, et al. Effectiveness of phased array focused ultrasound and active infrared thermography methods as a nondestructive testing of Ni-WC coating adhesion. Nondestruct Test Eva. 2019;34(2):205–220. doi: 10.1080/10589759.2019.1566905
   Web of Science ®Google Scholar
• Chicinaş HF, Marinca TF, Götze P, et al. Influence of aqueous milling duration on the sintered WC-10Co hard metal powders. J Mater Sci. 2018;53:2901–2910. doi: 10.1007/s10853-017-1701-6
   Web of Science ®Google Scholar
• Lei ZF, Liu XJ, Wu Y, et al. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes. Nature. 2018;563:546–550. doi: 10.1038/s41586-018-0685-y
   PubMed Web of Science ®Google Scholar
• Zhang Y, Zuo TT, Tang Z, et al. Microstructures and properties of high-entropy alloys. Prog Mater Sci. 2014;61:1–93. doi: 10.1016/j.pmatsci.2013.10.001
   Web of Science ®Google Scholar
• Riva S, Tudball A, Mehraban S, et al. A novel high-entropy alloy-based composite material. J Alloy Compd. 2018;730:544–551. doi: 10.1016/j.jallcom.2017.09.274
   Web of Science ®Google Scholar
• Zhao GY, Mostaghimi J, Boulos MI. The induction plasma chemical reactor: Part II. Kinetic model. Plasma Chem Plasma P. 1990;10:151–166. doi: 10.1007/BF01460453
   Web of Science ®Google Scholar
• Sun FL, Chen XY, Zhao ZW. Synthesis of coarse-grained tungsten carbide directly from scheelite/wolframite by carbothermal reduction and crystallization. JOM. 2020;72:340–346. doi: 10.1007/s11837-019-03345-7
   Web of Science ®Google Scholar
• Oh JH, Kim M, Lee YH, et al. Synthesis of tungsten carbide nanomaterials in triple DC thermal plasma jet system. J Nanosci Nanotechnol. 2019;19(10):6277–6284. doi: 10.1166/jnn.2019.17029
   PubMed Web of Science ®Google Scholar
• Wallace GC, Downey JP, Chorney J, et al. Statistical optimization of tungsten carbide synthesis parameters. In: Jiang T. et al., editors. 10th international symposium on high-temperature metallurgical processing. Springer, Cham; 2019. The minerals, metals & materials Series.
   Google Scholar
• Chaus AS. Microstructural and properties evaluation of M2 high speed steel after inoculating addition of powder W and WC. Mater Sci Tech. 2014;30:1105–1115. doi: 10.1179/1743284714Y.0000000558
   Web of Science ®Google Scholar
• Zhou YC, Wang QY, Zhou JN, et al. Comparison of three surface treatment methods for preparing WC-containing coatings. Surf Eng. 2019;1–6. doi:10.1080/02670844.2019.1630924.
   Web of Science ®Google Scholar
• Mehta A, Dickson J, Newell R, et al. Interdiffusion and reaction between Al and Zr in the temperature range of 425 to 475°C. J Phase Equilib Diffus. 2019;40:482–494. doi: 10.1007/s11669-019-00729-9
   Web of Science ®Google Scholar
• Wakai F, Aldinger F. Sintering through surface motion by the difference in mean curvature. Acta Mater. 2003;51:4013–4024. doi: 10.1016/S1359-6454(03)00222-2
   Web of Science ®Google Scholar
• Geskell DR, Laughlin DE. Introduction to the thermodynamics of materials. 6th ed. Boca Raton: Taylor & Francis; 2018.
   Google Scholar
• Yavari AR, Desre PJ, Benameur T. Mechanically driven alloying of immiscible elements. Phys Rev Lett. 1992;68:2235–2238. doi: 10.1103/PhysRevLett.68.2235
   PubMed Web of Science ®Google Scholar
• Binnewies M, Mike E. Thermochemical data of elements and compounds. 2nd ed. Weinheim: Wiley-VCH Verlag GmbH; 2002.
   Google Scholar
• Takeuchi A, Inoue A. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element. Mater Trans. 2005;46:2817–2829. doi: 10.2320/matertrans.46.2817
   Web of Science ®Google Scholar
• Sun JL, Zhao J, Gong F, et al. Development and application of WC-based alloys bonded with alternative binder phase. Crit Rev Solid State. 2019;44(3):211–238. doi: 10.1080/10408436.2018.1483320
   Web of Science ®Google Scholar
• Li FZ, Tian LH, Li RT, et al. Microstructure and wear resistance properties of Al/Al–Cu–Cr–Fe composites consolidated using spark plasma sintering. Composite Interfaces. 2020;27(5):515–527. doi: 10.1080/09276440.2019.1655317
   Web of Science ®Google Scholar