Effect of carbon nanotubes content on microstructure and properties of WC/Ni laser cladding coatings

References

• Zhang YC., Li ZG, Nie PL, et al. Effect of ultrarapid cooling on microstructure of laser cladding IN718 coating. Surf Eng. 2013;29;414–418. doi: 10.1179/1743294413Y.0000000142
   Web of Science ®Google Scholar
• Gopinath M, Karmakar DP, Nath AK. In-process detection of microstructural changes in laser cladding of in-situ Inconel 718/TiC metal matrix composite coating. J Alloy Compd. 2018;740;545–558. doi: 10.1016/j.jallcom.2017.12.364
   Web of Science ®Google Scholar
• Liu YH, Li J, Xuan FZ. Fabrication of TiC reinforced Ni based coating by laser cladding. Surf Eng. 2012;28;560–563. doi: 10.1179/1743294412Y.0000000026
   Web of Science ®Google Scholar
• Kaiming W, Yulong L, Hanguang F, et al. A study of laser cladding NiCrBSi/Mo composite coatings. Surf Eng. 2016;34:267–275. doi: 10.1080/02670844.2016.1259096
   Web of Science ®Google Scholar
• Zhai L, Ban C, Zhang J, et al. Characteristics of dilution and microstructure in laser cladding Ni-Cr-B-Si coating assisted by electromagnetic compound field. Mater Lett. 2019; 243:195–198. doi: 10.1016/j.matlet.2019.01.133
   Web of Science ®Google Scholar
• Weng F, Zhao LJ, Yu Hj, et al. Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y2O3 by laser cladding on Ti-6Al-4V alloy. J Alloy Compd. 2015;650;178–184. doi: 10.1016/j.jallcom.2015.07.295
   Web of Science ®Google Scholar
• Cai Y, Luo Z, Feng M, et al. The effect of TiC/Al2O3 composite ceramic reinforcement on tribological behavior of laser cladding Ni60 alloys coatings. Surf Coat Tech. 2016;291;222–229. doi: 10.1016/j.surfcoat.2016.02.033
   Web of Science ®Google Scholar
• Han T, Xiao M, Zhang J, et al. Laser cladding composite coating on mild steel using Ni–Cr–Ti–B4C powder. Surf Eng. 2018: 1–7. doi:10.1080/02670844.2018.1534926.
   Web of Science ®Google Scholar
• Wang K, Du D, Liu G, et al. Microstructure and properties of WC reinforced Ni-based composite coatings with Y2O3 addition on titanium alloy by laser cladding. Sci Technol Weld Joi. 2019;24:517–524. doi: 10.1080/13621718.2019.1580441
   Web of Science ®Google Scholar
• Shu D, Li Z, Yao C, et al. In situ synthesised WC reinforced nickel coating by laser cladding. Surf Eng. 2017;34(4):1–7.
   Web of Science ®Google Scholar
• Mohammed S, Rajamure RS, Zhang Z, et al. Tailoring corrosion resistance of laser-cladded Ni/WC surface by adding rare earth elements. Int J Adv Manuf Tech. 2018;97(9):4043–4054. doi: 10.1007/s00170-018-2227-z
   Web of Science ®Google Scholar
• Li MY, Han B, Wang Y, et al. Effects of La2O3 on the microstructure and property of laser cladding Ni-based ceramic coating. Optik. 2017;130;1032–1037. doi: 10.1016/j.ijleo.2016.11.111
   Web of Science ®Google Scholar
• Deesom D, Charoenrat K, Moonngam S, et al. Fabrication and properties of NiCr/CNTs nanocomposite coatings prepared by high velocity oxy-fuel spraying. Surf Coat Tech. 2016;306:240–244. doi: 10.1016/j.surfcoat.2016.06.016
   Web of Science ®Google Scholar
• Kumar S, Arif U, Kumar V, et al. Evaluation of mechanical properties of Ti6Al4 V built by composite coating of WS2, CNT, Ni, and Ti6Al4 V powders through laser cladding process. Adv Micro Nano Manuf Surf Eng. 2019: 647–661. doi:10.1007/978-981-32-9425-7_58.
   Google Scholar
• Rodríguez MA, Gil L, Camero S, et al. Effects of the dispersion time on the microstructure and wear resistance of WC/Co-CNTs HVOF sprayed coatings. Surf Coat Tech. 2014;258:38–48. doi: 10.1016/j.surfcoat.2014.10.014
   Web of Science ®Google Scholar
• Chen Y, Zhang Q, Chen Z. Study on the element segregation and laves phase formation in the carbon nanotubes reinforced IN718 superalloy by laser cladding. Powder Technol. 2019;355:163–171. doi: 10.1016/j.powtec.2019.07.063
   Web of Science ®Google Scholar
• Peng T, Chang I. Mechanical alloying of multi-walled carbon nanotubes reinforced aluminum composite powder. Powder Technol. 2014;266:7–15. doi: 10.1016/j.powtec.2014.05.068
   Web of Science ®Google Scholar
• Chen Y, Lu F, Zhang Ke, et al. Laser powder deposition of carbon nanotube reinforced nickel-based superalloy Inconel 718. Carbon N Y. 2016;107(2016):361–370. doi: 10.1016/j.carbon.2016.06.014
   Web of Science ®Google Scholar
• Sebastián S, Ramos-Moore E, Björn L, et al. Grain growth analysis of multiwalled carbon nanotube-reinforced bulk Ni composites. Carbon N Y. 2014;70(2):173–178.
   Google Scholar
• Lei J, Shi C, Zhou S, et al. Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding. Surf Coat Tech. 2018;334:274–285. doi: 10.1016/j.surfcoat.2017.11.051
   Web of Science ®Google Scholar
• Ding L, Hu S, Quan X, et al. Effect of Mo and nano-Nd2O3 on the microstructure and wear resistance of laser cladding Ni-based alloy coatings. Appl Phys A. 2016;122(4pt.1):288.1–288.7.
   Google Scholar
• Wei B, Zhou J, Yao ZJ, et al. Excellent microwave absorption property of nano-Ni coated hollow silicon carbide core-shell spheres. Appl Surf Sci. 2020;508:145261–145274. doi: 10.1016/j.apsusc.2020.145261
   Web of Science ®Google Scholar
• Ping XL, Fu HG, Sun ST, et al. Microstructure and performance of Nb-bearing Ni60A-Cr3C2 coatings manufactured by laser cladding. Surf Eng. 201911):1–13. doi:10.1080/02670844.2019.1631510.
   Web of Science ®Google Scholar
• Li C, Zhang Q, Wang F, et al. Microstructure and wear behaviors of WC-Ni coatings fabricated by laser cladding under high frequency micro-vibration. Appl Surf Sci. 2019;485:513–519. doi: 10.1016/j.apsusc.2019.04.245
   Web of Science ®Google Scholar
• Abioye TE, Folkes J, Clare AT, et al. Concurrent Inconel 625 wire and WC powder laser cladding: process stability and microstructural characterisation. Surf Eng. 2013;29:647–653. doi: 10.1179/1743294412Y.0000000073
   Web of Science ®Google Scholar
• Zhang Y, Han T, Xiao M, et al. Microstructure and properties of laser-clad FeNiCoCrTi0.5Nb0.5 high-entropy alloy coating. Mater Sci Tech. 2020;36:811–818. doi: 10.1080/02670836.2020.1743924
   Web of Science ®Google Scholar
• Rottwinkel B, Nölke C, Kaierle S, et al. Laser cladding for crack repair of CMSX-4 single-crystalline turbine parts. Lasers Manuf Mater Process. 2017;4:13–23. doi: 10.1007/s40516-016-0033-8
   Google Scholar
• Barr C, Da Sun S, Easton M, et al. Influence of macrosegregation on solidification cracking in laser clad ultra-high strength steels. Surf Coat Tech. 2018;340;126–136. doi: 10.1016/j.surfcoat.2018.02.052
   Web of Science ®Google Scholar