Corrosion behaviours of arc-sprayed AlSi-based amorphous/nanocrystalline coating

References

• Inoue A, Ohtera K, Tsai AP, et al. Aluminum-based amorphous alloys with tensile strength above 980 MPa (100 kg/mm2). Jpn J Appl Phys. 1988;27:L479–L482.
   Web of Science ®Google Scholar
• Inoue A, Sobu S, Louzguine DV, et al. Ultrahigh strength Al-based amorphous alloys containing Sc. J Mater Res. 2004;19:1539–1543.
   Web of Science ®Google Scholar
• Kim SY, Lee GY, Park GH, et al. High strength nanostructured Al-based alloys through optimized processing of rapidly quenched amorphous precursors. Sci Rep. 2018;8:1–12.
   PubMed Web of Science ®Google Scholar
• Jiang JZ, Hofmann D, Jarvis DJ, et al. Low-density high-strength bulk metallic glasses and their composites: a review. Adv Eng Mater. 2015;17:761–780.
   Web of Science ®Google Scholar
• Davis JR. Handbook of thermal spray technology. ASM International: Materials Park, OH, USA. 2004. p. 3–5.
   Google Scholar
• Liu Q, Cheng J, Wang B, et al. Effects of substitution of Fe by mischmetal on formation and properties of arc-sprayed AlSi-based amorphous coating. J Therm Spray Techn. 2018;27:949–958.
   Web of Science ®Google Scholar
• Cheng JB, Feng Y, Yan C, et al. Development and characterization of Al-based amorphous coating. JOM. 2020;72:745–753.
   Web of Science ®Google Scholar
• Henao J, Concustell A, Cano IG, et al. Novel Al-based metallic glass coatings by cold gas spray. Mater Design. 2016;94:253–261.
   Web of Science ®Google Scholar
• Gao M, Lu W, Yang B, et al. High corrosion and wear resistance of Al-based amorphous metallic coating synthesized by HVAF spraying. J Alloy Compd. 2018;735:1363–1373.
   Web of Science ®Google Scholar
• Zhang D, Kong D. Microstructures and immersion corrosion behavior of laser thermal sprayed amorphous Al-Ni coatings in 3.5% NaCl solution. J Alloy Compd. 2018;735:1–12.
   Web of Science ®Google Scholar
• Cheng JB, Sun B, Ge YY, et al. Nb doping in laser-cladded Fe25Co25Ni25(B0.7Si0.3)25 high entropy alloy coatings: microstructure evolution and wear behavior. Surf Coat Technol. 2020;126321:1–9.
   Google Scholar
• Cheng JB, Sun B, Ge YY, et al. Effect of B/Si ratio on structure and properties of high-entropy glassy Fe25Co25Ni25(BxSi1-x)25 coating prepared by laser cladding. Surf Coat Technol. 2020;126320:1–8.
   Google Scholar
• Ji W, Fu Z, Wang W, et al. Mechanical alloying synthesis and spark plasma sintering consolidation of CoCrFeNiAl high-entropy alloy. J Alloy Compd. 2014;589:61–66.
   Web of Science ®Google Scholar
• Zhang L, Chen Y, Feng Y, et al. Electrochemical characterization of AlTiN, AlCrN and AlCrSiWN coatings. Int J Refract Met H. 2015;53:68–73.
   Web of Science ®Google Scholar
• Chou WJ, Yu GP, Huang JH. Corrosion behavior of TiN-coated 304 stainless steel. Corros Sci. 2001;43:2023–2035.
   Web of Science ®Google Scholar
• Guo RQ, Zhang C, Chen Q, et al. Study of structure and corrosion resistance of Fe-based amorphous coatings prepared by HVAF and HVOF. Corros Sci. 2011;53:2351–2356.
   Web of Science ®Google Scholar
• Zhao W, Kong D. Effects of laser power on immersion corrosion and electrochemical corrosion performances of laser thermal sprayed amorphous AlFeSi coatings. Appl Surf Sci. 2019;481:161–173.
   Web of Science ®Google Scholar
• Lee JH, Ahn SH, Kim JG. Effect of Al additions in WC-(Cr1-xAlx) N coatings on the corrosion resistance of coated AISI D2 steel in a deaerated 3.5 wt.% NaCl solution. Surf Coat Tech. 2005;190:417–427.
   Web of Science ®Google Scholar
• Stoynov Z. Impedance modelling and data processing: structural and parametrical estimation. Electrochim Acta. 1990;35:1493–1499.
   Web of Science ®Google Scholar
• Ding F, Li SQ, Zhang PZ, et al. Characterisation and corrosion behavior of WAP coating on 300M steel. Surf Eng. 2019;35:986–996.
   Web of Science ®Google Scholar
• Wu WP, Liu JW, Zhang Y, et al. Electrochemical characteristics of iridium coating by double glow plasma discharge process on titanium alloy substrates. Surf Eng. 2019;35:954–961.
   Web of Science ®Google Scholar
• Hong S, Wu Y, Zheng Y, et al. Microstructure and electrochemical properties of nanostructured WC-10Co-4Cr coating prepared by HVOF spraying. Surf Coat Tech. 2013;235:582–588.
   Web of Science ®Google Scholar
• Zhou JL, Kong DJ. Effects of Ni addition on corrosion behaviors of laser cladded FeSiBNi coating in 3.5% NaCl solution. J Alloys Compd. 2019;79530:416–425.
   Web of Science ®Google Scholar
• Guilemany JM, Fernández J, Espallargas N, et al. Influence of spraying parameters on the electrochemical behavior of HVOF thermally sprayed stainless steel coatings in 3.4% NaCl. Surf Coat Tech. 2006;200:3064–3072.
   Web of Science ®Google Scholar
• Cheng JB, Wang BL, Qi L, et al. In-situ synthesis of novel Al-Fe-Si metallic glass coating by arc spraying. J Alloys Compd. 2017;716:88–95.
   Web of Science ®Google Scholar
• Li RT, Murugan VK, Dong ZL, et al. Comparative study on the corrosion resistance of Al-Cr-Fe alloy containing quasicrystals and pure Al. J Mater Sci Technol. 2016;32:1054–1058.
   Web of Science ®Google Scholar
• Victoria BT, Jorge U, Jesús J, et al. Synthesis, characterisation and electrochemical evaluation of a functionalised coating for mild steel corrosion protection. Sur Eng. 2019;35:360–369.
   Web of Science ®Google Scholar
• Sanchez-Amaya JM, Cottis RA, Botana FJ. Shot noise and statistical parameters for the estimation of corrosion mechanisms. Corros Sci. 2005;47:3280–3299.
   Web of Science ®Google Scholar
• Ha HY, Jang MH, Lee TH, et al. Interpretation of the relation between ferrite fraction and pitting corrosion resistance of commercial 2205 duplex stainless steel. Corros Sci. 2014;89:154–162.
   Web of Science ®Google Scholar
• Xu P, Zhang C, Wang W, et al. Pitting mechanism in a stainless steel-reinforced Fe-based amorphous coating. Electrochim Acta. 2016;206:61–69.
   Web of Science ®Google Scholar
• Mato S, Alcala G, Woodcock TG, et al. Corrosion behavior of a Ti-base nanostructure-dendrite composite. Electrochim Acta. 2005;50:2461–2467.
   Web of Science ®Google Scholar
• Jiang Q, Miao Q, Liang W, et al. Corrosion behavior of arc sprayed Al-Zn-Si-RE coatings on mild steel in 3.5 wt% NaCl solution. Electrochim Acta. 2014;115:644–656.
   Web of Science ®Google Scholar
• Hu H, Li N, Cheng J, et al. Corrosion behavior of chromium-free dacromet coating in seawater. J Alloy Compd. 2009;472:219–224.
   Web of Science ®Google Scholar
• Moretti G, Guidi F, Fabris F. Corrosion inhibition of the mild steel in 0.5M HCl by 2-butyl-hexahydropyrrolo[1,2-b][1,2]oxazole. Corros Sci. 2013;76:206–218.
   Web of Science ®Google Scholar
• Popova A, Sokolova E, Raicheva S, et al. AC and DC study of the temperature effect on mild steel corrosion in acid media in the presence of benzimidazole derivatives. Corros Sci. 2003;45:33–58.
   Web of Science ®Google Scholar
• Zhen L, Jiding Z. The influence of flow velocity on electrochemical reaction of metal surface. IOP Conf Ser: Mater Sci Eng. 2017;274:1–6.
   Google Scholar
• Aguirre J, Walczak M, Rohwerder M. The mechanism of erosion-corrosion of API X65 steel under turbulent slurry flow: effect of nominal flow velocity and oxygen content. Wear. 2019;203:438–439.
   Google Scholar
• Hong S, Wu Y P, Wu J H, et al. Effect of flow velocity on cavitation erosion behavior of HVOF sprayed WC-10Ni and WC-20Cr3C2-7Ni coatings. Int J Refract Met Hard Mat. 2020;92:1–10.
   Web of Science ®Google Scholar
• Hong S, Lin J R, Wu Y P, et al. Cavitation erosion characteristics at various flow velocities in NaCl medium of carbide-based cermet coatings prepared by HVOF spraying. Ceram Int. 2020.
   Web of Science ®Google Scholar
• Wharton JA, Wood RJK. Influence of flow conditions on the corrosion of AISI 304L stainless steel. Wear. 2004;256:525–536.
   Web of Science ®Google Scholar
• Prasannakumar RS, Bhakyaraj K, Chukwuike VI, et al. An investigation of the effect of pulse electrochemical deposition parameters on morphology, hardness and corrosion behavior in the marine atmosphere. Sur Eng. 2019;35:1021–1032.
   Web of Science ®Google Scholar